text
stringlengths 51
151k
| language
stringclasses 7
values |
|---|---|
Iran sticking to nuclear deal, IAEA says, amid new U.S. sanctions | Reuters
November 22, 2018 / 12:30 PM / 2 months ago
Iran sticking to nuclear deal, IAEA says, amid new U.S. sanctions
VIENNA (Reuters) - Iran is implementing its side of its nuclear deal with major powers, the U.N. atomic watchdog policing the pact reaffirmed on Thursday, two weeks after the latest wave of reimposed U.S. sanctions against Tehran took effect.
International Atomic Energy Agency (IAEA) Director General Yukiya Amano waits for the start of a board of governors meeting at the IAEA headquarters in Vienna, Austria June 4, 2018. REUTERS/Leonhard Foeger/Files
President Donald Trump said in May he was pulling the United States out of the 2015 nuclear deal for reasons including Iran's influence on the wars in Syria and Yemen and its ballistic missile programme, none of which are covered by the pact.
Germany, France and Britain have been scrambling to prevent a collapse of the deal, under which international sanctions against Tehran were lifted in exchange for strict limits being placed on Iran's nuclear activities.
Many Western companies have cancelled plans to do business with Iran for fear of breaching the sanctions Washington has put back in place. That has raised fears that Iran will breach the deal's nuclear limits, which are designed to keep it a year away from being able to build a nuclear weapon if it chose to.
"Iran is implementing its nuclear-related commitments under the Joint Comprehensive Plan of Action," International Atomic Energy Agency Director-General Yukiya Amano told a quarterly meeting of his agency's 35-nation Board of Governors.
The JCPOA is the official name of the nuclear accord.
"It is essential that Iran continues to fully implement those commitments," he added, confirming the findings of a confidential report to IAEA member states last week. [nL8N1XN5EU]
Amano did not comment on the broader impact of U.S. sanctions, the latest round of which took effect on Nov. 5. Iran has warned it could scrap the deal if signatories France, Britain and Germany and their allies fail to preserve the economic benefits promised by its terms.
The European powers have been working on setting up a so-called special-purpose vehicle that would act as a kind of clearing house matching Iranian exports with EU exports in what amounts to a barter arrangement to circumvent U.S. sanctions.
But the countries they have approached to host it have declined, diplomats say, delaying the project and deepening doubt as to whether Europeans can counteract the bulk of U.S. sanctions targeting oil and other vital sources of income. [nL8N1XP90I]
|
en
|
Copenhagen (Jackson County, Alabama): Summarized Details ;
Home >> Alabama >> Jackson County >> Copenhagen >> Summary
About Copenhagen (Click for our profile page)
Our information shows that the community of Copenhagen is historic. The information below applies to the area where Copenhagen would have been located.
Time Zone: The area where Copenhagen was located is in the Central Time Zone (CST/CDT)<2>
For the purpose of mapping and calculating distances, we have chosen a reference point within Copenhagen. The point that we are using is located at these GPS coordinates - Latitude: 34.9842, Longitude: -85.7250 [Map]. In this case, the coordinates for Copenhagen have been provided by the Geographic Names Information System (GNIS).
Lat: 34° 59' 3"
Lon: -85° 43' 29"
Federal GNIS/FIPS Codes for Copenhagen
GNIS ID: 139143
(For more about Federal Codes, see our Misc Page for Copenhagen)
<2> While Copenhagen is in the Central Time Zone, the area just to the east is in the Eastern Time Zone (EST/EDT).
<3> Area code (938) is an overlay for area code (256). For more about area code overlays, please see our Glossary for Copenhagen.
<4> The elevation is an estimate for the area around Copenhagen - it will be higher in some places and lower in others.
<5> The longitude & latitude values may not be the geographic center of Copenhagen, rather it may be a prominent intersection or the center of population, etc. It will vary depending on the source.
<6> The USGS 7.5 Minute topographic map which includes Copenhagen.
<8> The area value has been supplied by the US Census Bureau and it can be different than the geographic boundaries of Copenhagen. The value given by the Census Bureau reflects their statistical (or sampling) requirements. For example, if there is a cluster of people living just outside of the community's official boundary, the Census-defined area might be expanded to include that group.
|
en
|
Your Ride Is On It's Way: Uber Requirements For Wanna-Be Drivers - Viral Rang
Your Ride is On it's Way: Uber Requirements For Wanna-Be Drivers
Interesting in driving for Uber? Here's everything you need to know about Uber requirements to start up the ultimate side (or main) hustle. 36% of Americans have used a ridesharing service such as Uber, a statistic that has more than doubled in five years
Cars Vehicles, People
Uber Requirements for Vehicles
Completing the Uber Application Process
Interesting in driving for Uber? Here's everything you need to know about Uber requirements to start up the ultimate side (or main) hustle…
36% of Americans have used a ridesharing service such as Uber, a statistic that has more than doubled in five years. Some urban residents are forgoing vehicle ownership entirely as states across the nation struggle to implement the new legislation for the growing industry.
In short, ridesharing is more than an ephemeral trend — it's the future of transportation. If you want to get in on the action, now's the time to join a rideshare service such as Uber. The question is, what are the qualifications to get started?
Don't let bad information prevent you from landing a job in the rideshare industry. Here are all the Uber requirements you need to know.
Driver qualifications for the rideshare industry are far lower than those of taxi businesses. But that doesn't mean just anyone can get involved. For example, you need more than a valid US driver's license.
Uber requires its drivers to have at least one year of experience on the road. This mandate assumes you are 23 years of age or older. Drivers under this age limit need at least 3 years of experience behind the wheel.
So if you are a recent high school graduate looking for your first freelance opportunity, don't get your hopes up.
In addition to a license and driving experience, you must possess car registration in your state of residence. Note, however, that the registration can be in another person's name.
Uber will not consider drivers with a criminal history or marks on their driving record. This includes minor violations, such as driving over the speed limit. You'll have to wait for these violations to drop off your record before applying.
What's the most common sticking point when becoming an Uber driver? Insurance. If you're serious about becoming an Uber driver, it's in your best interest to have a masterful grasp on the complicated insurance environment.
To become an Uber driver, you at least need the minimal insurance coverage required by your state. Uber itself will offer varying insurance coverage depending on where you are in the ridesharing process. For example, Uber will offer liability coverage while you are logged into the Uber app, but they will not offer comprehensive and collision coverage until you are picking up or transporting a passenger.
If you want your personal insurance policy to cover an accident that occurs while logged into the Uber app, you'll need commercial insurance for Uber.
Uber offers different vehicle tiers that all have their own requirements. However, there are some similarities. All Uber vehicles must have four doors and seats for at least four passengers.
In addition, Uber disallows clunkers. The vehicle age requirement varies depending on where you live, but in general, the vehicle cannot be older than 15 to 20 years. It will also need to pass any state safety or emissions tests.
Vehicles with physical or mechanical damage will have a hard time getting approved. Visible damage, such as scratches or dents, is prohibited on Uber vehicles. Smaller mechanical problems, such as a malfunctioning air conditioner, will need to be repaired before applying for the position.
Now, let's talk about some of the different Uber tiers.
UberX is the standard rideshare service. If your vehicle is a sedan and fits the criteria listed above, then congratulations. It should be a good fit for the UberX vehicle option.
The next tier is UberXL. These vehicles must have room to transport at least six passengers. It's reserved for larger vehicles, such as SUVs and minivans.
UberSUV is for SUV's only. These vehicles must be no older than about five years. Even if yours falls in this age range, Uber must also consider it a luxury vehicle.
UberBlack consists of black luxury sedans. It's not enough for the outside to be black, but the inside, too. Leather only.
Other Uber tiers are available but much more niche. So long as your vehicle qualifies for UberX, you're good to go. Take note that you received better rates for driving a vehicle in a higher Uber tier.
Becoming an Uber driver starts with an online application. You'll find the signup notification in the top right corner of the main website. From here you enter personal information, such as your email address, name, and city.
As a small tip, locate an Uber invite code before submitting this information. You can find this from a variety of related websites, businesses, or Uber ads. Invite codes will help you score special offers, such as the new driver bonus.
Uber will ask for information about your vehicle once you submit the basics. It may vary slightly from the requirements listed in the previous section. That's because different states have different qualifications.
Lastly, you'll provide your social security number and consent to a background check. This is the easy part. If Uber approves your application, which can take a good deal of time, you'll need to have your vehicle inspected by a professional.
Certain Uber locations will perform the 19-point vehicle inspection for free. Otherwise, you can work through Jiffy Lube or Uber's list of approved mechanics.
Uber requirements may be more hands-on than other freelance outlets. However, the rideshare industry promises an excellent source of income through Uber payments and the occasional tip. To optimize your earnings, consider signing up for Uber Eats so you have more transportation options during dry spells.
|
en
|
With an expertise of more than 6 years in this field, we have managed to become one of the leading manufacturers and suppliers of Conveyor Bag Metal Detector. We have a team of skilled workers and experienced professionals who work in close coordination to deliver a flawless range of products to our clients. It is widely used in many industrial places for metal detection purposes in a safe and hassle free manner. Made of excellent quality components, this machine is highly appreciated and demanded among our clients for numerous qualities like strong construction, low maintenance requirements, and prolonged service life. Conveyor Bag Metal Detector is delivered to our clients' doorsteps in a promised time frame.
|
en
|
While taking a walk yesterday afternoon, The Apostrophe Song bouncing in my head, I almost literally stumbled on this placard, as if it had come up to greet me.
Considering I believe in signs, I knew this one was telling me to share the video my neighbor had shared. I think of it as a public service announcement of sorts, increasing awareness of an abuse that still goes unchallenged and giving us the tools to fight it.
It turns out that the video was produced by Adelaide, Australia-based company Cool Rules, which produces learning tools for children. If you’re looking for an easy way to remember when the apostrophe is appropriate and when it is not, or need a fun way to teach others, or even if you just like a catchy tune, give it a listen. And if you don’t care for the pop version, Cool Rules also offers the ditty in hip hop, rock and acoustic varieties.
Tagged as apostrophe, apostrophe abuse, Conjunction Junction, Lolly Lolly Lolly Get Your Adverbs Here, music, punctuation, Schoolhouse Rock, The Apostrophe Song
According to the Fake AP Stylebook’s April 21 Facebook post: “Avoid using masculine pronouns in sentences where the subject’s gender is not specified. Broads find it offensive.”
What this broad finds offensive is the subject/pronoun disagreement that often occurs as a result of a writer’s attempt at political correctness.
I am a firm believer that political correctness and grammatical correctness are not mutually exclusive. (Though if I did have to choose? Hmmm.)
It is incorrect to suggest that “everyone have their say” or “the winner deserves their prize.” In these instances, because the subject is singular,“their” should be “his.” “He” and “his” are considered gender neutral, even though they are masculine pronouns. For those sensitive to gender equity in grammar, “his or her” is perfectly acceptable. Or, if we know that the subject, say “winner” in the earlier example, is female, we may say “the winner deserves her prize. “Their” is just plain wrong.
Also, remember that “everyone” is singular, even though it sounds like a lot of people. Every one. So please do not say “everyone is entitled to their opinion.”
I recently stumbled on a blog that claims to specialize in writing. I won’t call out the blogger by name because I know how hard it is to churn out copy day after day, and I am the first to admit that, in so doing, I make mistakes regularly. There is a difference between making a mistake and deliberately breaking a well-known rule.
The blogger wrote this week, “It helps a writer’s ego as well as their ability to write if they have peers to read and give feedback on their work.”
The writer is a “he” or a “she,” not a “they;” otherwise, it would be “writers’ egos” and “writers’ work,” plural. And if the choice is to go plural possessive, please note where the apostrophe goes.
Six days earlier, the same blogger wrote: “Everyone has read a bit of bad prose or poetry in their life and access to the Internet seems to make it easier to point out other’s grammatical and spelling errors as well as their downright awful writing in general.”
Tagged as apostrophe, Facebook, Fake AP Stylebook, feminine pronoun, gender pronoun, grammar, masculine pronoun, political correctness, possessive, possessive pronoun, pronouns, punctuation, writing
I never did see Lowry’s volcano. Well, I suppose I did, I must have. I probably saw it all the time, but Popocatépetl remains an enigma. 4.499 palabras más
Based on Monster Widget, this plugin consolidates all bbPress core widgets into a single widget enabling theme developers to create multiple instances with ease. It has been created to save time during theme development and review by minimizing the steps needed to populate a sidebar with widgets. This widget is not designed for use in production.
|
en
|
EarlyWord: The Publisher | Librarian Connection » Blog Archive Titles to Know and Recommend, Week of February 27, 2017 - EarlyWord: The Publisher | Librarian Connection
« BEHIND CLOSED DOORS Heads To Movies
A DARKER SHADE OF MAGIC Catches Fire »
This entry was posted on Friday, February 24th, 2017 at 3:39 pm and is filed under 2016/17 -- Winter/Spring, New Title Radar. You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.
|
en
|
January 13, 2018, 1:50 am / paxtonhezup.full-design.com
Jogging may also be an alternative In case your medical doctor states so. If you're able to only do ten to 15 minutes at any given time owing in your endurance and newborn's desires, do numerous of these shorter blocks each day.
1. Know the Components Finding flat abs isn't really about starving by yourself or residing in the fitness center. Minimizing belly Excess fat entails a mix of wise ingesting and effective exercise. You should definitely eat more than enough foodstuff to keep Your system from experiencing hormone imbalances; feeding on as well very little (fewer than 1200 calories a day) lowers the level of the Excess fat-burning hormone leptin in Your entire body, which can decelerate weight loss.
wikiHow Contributor Mint tea is excellent to suppress abnormal starvation and foods cravings, so it could assist you to stick to a stricter food plan and add to some outcome.
Assess your action. Exactly how much physical exercise do you receive in a normal week? How intensive is that activity? The amount variety do you will get as part of your activity, and simply how much would you love it?
Hold for 3 deep breaths and loosen up.[8] An alternative is to place your suitable hand on the inside of your remaining knee, plus your still left hand on the inside within your suitable knee. Your arms will likely be crossed in front of you. Force outwards using your hands when pushing inwards along with your knees.[9] One more alternative is to position your left hand on the skin of the remaining knee, along with your right hand on the surface of the right knee. Press inwards with your palms whilst pushing outwards with all your knees.
All you really want is a flooring and a mat.[29] Pilates lessons are offered in a variety of options, which more info include through numerous regional gyms, YMCAs, and town-operate physical exercise packages.[thirty] YouTube can check here also be an excellent supply for Pilates if deciding upon to figure out at home, as lots of Licensed Health instructors educate Pilates within their video clips.
Decide to prepare. Inventory your pantry with healthy fare and convey healthy snacks with you so you are organized whenever you get hungry. "Once we're really hungry, our physiology kicks in and that's whenever we're craving the hamburger and fries; we're not craving a salad," Williams claims.
Regulate your fruit and veggie parts. Even though raw greens and fruits are excellent decisions for All round health, they induce your tummy to stretch, so it's best to eat them in smaller sized portions unfold each day.
Up coming, elevate your hips up off the bottom to stretch your toes towards the ceiling. With Manage, reduce a person vertebrae at any given time until your hips are again on the floor. Keep the Main restricted when you reduce your legs back again to beginning position to finish just one rep.
Don't be concerned, I recognize that this can be the case along with you too. And, I'm not listed here to shame this idea. This is just standard human behavior. But you must set an conclude to it, and here is your Motivation for that. Commonly, the main reason with the lethargic conduct of folks pertaining to fitness center is The issue. Thinking about this issue, below I share Suggestions to secure a Flat Belly Quick.
Sit on the floor and lean on his hands behind his back. Now tense your tummy and carry the pelvis up until your body forms a straight horizontal line.
Cross your still left leg above your right leg, then cross your suitable leg above your remaining leg. Keep on to alternate in fast succession for sixty seconds without having dropping your legs.
Continue to keep a meals diary. Produce down every thing you try to eat for on a daily basis -- and no honest skipping the goods you're ashamed about. "The reasoning is to today's health tip of the day write down it down .
How to make it happen: Lie on your back with your knees bent and also the soles of one's feet on the floor. Extend your arms along your sides a few inches off the floor with palms dealing read more with in, and have interaction your Main to elevate your head and shoulders click here up off the ground.
|
en
|
Bicycle Accessories - Helmet Light - 10
Outdoor Led USB Rechargeable Bicycle Bike Head&Tail Safety Cycling Warning Light
Xlite100 Waterproof Bicycle Smart Brake Sensor LED USB Tail Light Rear Lamp US
Smart Waterproof Induction Bicycle Light Adjustable Rechargeable Bike Taillights
Azur - 2000 Lumens Front Head Light Kit - Rechargeable - Helmet Mount
LEDB Rechargeable Bike Tail Light Bicycle Cycling Safety Warning Rear Lamps
DUO-120 RED & White LED USB Bike Light Strobe Flashing Front or Rear Safety W...
Sale Waterproof Headlight Taillight Safety Bike light Set Bicycle Tail LED light
USB Rechargeable XML T6 LED Bicycle Bike Light Front Cycling Light Head Lamp USA
Bicycle Taillight Smart Brake Sensor LED USB Tail Light Rear Lamp Waterproof US
1X T6 LED MTB Bicycle USB Front Headlight Light XM-L Racing Bike Rear Lamp NTD
Volcano Eye Red Blue Rear Bike Tail Light 2 Pack, Ultra Bright USB Rechargeable
2PCS Headlight Taillight Safety Bike light Bicycle Tail LED light High Quality
UOKOO LED Safety Light (4 Pack) Refun Waterproof Red Flashing Bike Rear Tail Lig
Bontrager Ion Pro RT/ Flare RT Bike Light Set *NEW*
Tactical Safety Strobe Lamp Survival Helmet LED Airsoft IR Signal Flashing Light
ACHICOO Bike Tail Light, USB Rechargeable Bicycle Tail Light, 5 Lighting Modes,
4d 17h 2m 15s
Location: North Scituate,MA,USA
Xlite100 LED USB Bicycle Smart Brake Sensor Tail Light Rear Lamp Durable New USA
Schutt Football Helmet ion Large Varsity Light Gold 2011 Recertfied 2014 Used
This is a light gold schutt ion 3D varsity football helmet 2011 recertified last in 2014! only used 4 games last season still in good condition. With Forrest green face mask very nice helmet!
Bud Light die-cast metal football helmet bank by Ertl, NIB, from 1995
approx 5 long x 5 tall. only opened to take the photos for this listing. a great item for the man cave shelf. Excellent quality item from ERTL.
Nite rider minewt plus usb light bar and helmet mount!
Good condition. Didn't see much use. Maybe 5 to 6 times. This includes both the bar and helmet mounts and extension cable to out battery in pocket. Battery holds charge and works great. Has original box with usb cable and charger. See my other auction for another unit with bar mount.
Head CLOE Ski / Snowboard Womens Helmet, Light Blue, Large, Great Condition
CLOE The helmet of choice for freestyling girls The lightest lid in Head's helmet program the CLOE is the chosen helmet for freestyle girls. In addition to being lightweight the CLOE has the comfort of the WOMAN SPECIFIC BEANIE liner. Head's Cloe helmet is one of the lightest weight helmets on the market. At only 380g. weight with all padding and lining included) it is one of the lightest helmets to pass all North American AND European wintersport safety standards. The style of this helmet is a Polycarbonate(lightweight plastic) half-shell design, with EPS injected foam padding. Get out there and ride! SIZE L 56-59cm
Football Helmet Sticker vintage Budweiser Bud Dry Light oop beer 6
NICE STAINED GLASS RED FOOTBALL HELMET WALL SOCKET SPORTS ROOM NIGHT LIGHT LITE
Offered for sale is this nicely crafted stained glass football helmet night light. The item is in basically good condition overall. Might show some minor wear. Please see pictures to get an accurate view of the item and it's condition. Unique item for that special football fans bedroom. Bathroom or even home bar or den. Sure to make a welcome addition to your household and collection! We are currently cleaning out one of our large dry storage buildings and will be listing many interesting vintage items so be sure to see our other auctions. Thank you! NO RESERVE! At curious-g the pictures tell the story. And what you see in the pictures is what you get! All of our auctions show the actual picture of the actual item. This should allow you to judge and grade the item on your own personal standards. Please take the time to view all the pictures ... moreand please, look at the pictures closely, read item description and terms in add before bidding. If you feel we have misidentified an item email us and we will post your answer for others. Please ask before you bid if you have any questions or concerns about the item. We have a interesting and eclectic selection of items collected over years. We list many items each week and have not only an extensive collection of wonderful vintage items. And more arriving regularly. I do not consider myself an expert, in all categories. We welcome all information and advice, and questions. All items are vintage which besides meaning that they have come from a certain era and represent a style or image from an era or time in the past. It also means they have had another or other homes before now, and are sold as is and as found. Unless otherwise designated. We have found improper cleaning and restoration sometimes can actually do unwanted damage, even with the best intentions. So we leave that to the new owner to decide how to proceed in such matters, if needed. And we cannot say if the items might of come from homes who's previous owners smoked, or heated with wood stoves, or had pets, o
FIGURAL CHRISTMAS LIGHT BULBS 2 HELMET HAT SNOWMANS WORKING 1 IS 2 SIDED XMAS
ONE IS C7 AND ONE IS C6 MILK GLASS BULBS. THIESE BULBS LITE. NO CHIPS OR CRACKS IN GLASS. PLEASE( ENLARGE PHOTOS) FOR A GOOD LOOK AT PAINT AND CONDITION AS THEY ARE AN IMPORTANT PART OF THE DESCRIPTION. PAYPAL PAYMENTS ONLY. PAYMENT DUE WITHIN 3 DAYS OF AUCTION END. QUESTIONS JUST EMAIL. I SELL AND SHIP TO THE LOWER 48 STATES ONLY. SORRY NO EXCEPTIONS. I DO NOT SHIP ON SATURDAY, SUNDAY OR HOLIDAYS. PAYMENT MUST BE MADE BY NOON ON FRIDAY( MY TIME) IF YOU WANT YOUR ITEMS MAILED FRIDAY AFTERNOON. I HAVE OTHER BULBS TO SELL, SEE MY LISTINGS. I TRY TO PUT THEM ON EBAY SATURDAY NITE, SUNDAY OR MONDAY. I COMBINE SHIPPING. IF YOU WIN ANY OTHER AUCTION I HAVE THAT HAS A SINGLE XMAS LITE BULB IN IT, THE SHIPPING FOR THAT AUCTION WILL BE $1.10. SO THE SHIPPING FOR TWO AUCTIONS WOULD BE 7.65, FOR 3 AUCTIONS IT WOULD BE 8.75. AND SO ON. THIS 1.10 SHIPPING ... moreONLY APPLIES TO SINGLE XMAS LITE BULB AUCTIONS, NOT BOXES OR HEAVIER ITEMS. THANK YOU. I KNOW IT SAYS ECONOMY MAIL BUT ON LIGHTER ITEMS I USUALLY SHIP PRIORITY MAIL, SO NORMALLY YOU WILL GET YOUR ITEM IN 2 TO 3 DAYS, DEPENDING ON YOUR ZIP, AND THE WEATHER( SUCH AS BLIZZARD ECT.
Koehler Wheat Mining Cap Lamp Light w/ Charger, Battery Belt, and Helmet VINTAGE
SOLD AS IS! Charger light comes on. There is no fluid in the battery. I do not know if the battery can be refilled or if this now just a prop for your halloween costume. Top of battery text includes: MSHA Certified electric cap lamp. Permissible electric cap lamp, Canada Em&R, no 61 L, Approval 6D-30-46 issued to Koehler Manufacturing CO. You can see the chargers sticker and parts numbers in the picture. It is model 2100 G 1.
Original Riddell VSR1 Football Helmet. Light blue no Padding.
Up for auction is this original Riddell VSR1 Helmet shell. It is 7 1/4 to 7 3/4 in size and a light shade of blue. This helmet comes as you see it, no padding. Warning tag still is attached and that you get. This should seal the deal for sure. Never used just light scuffing from box wear. Starting cheap. As you know Helmethut com has the ability to stripe/number or customize(parts/masks and accessories) your helmets in hundreds of ways. Keep looking back for more auctions. Literally thousands of football helmet related items on the way. If in need of something in particular give us a shout. Thanks for viewing and please do not ask for team logos of any league. Very low flat rate shipping cost to continental US. Thank you.
E.D. Bullard Miner's Helmet & Light
This Hard Boiled brand miner's helmet was made by the E.D. Bullard Company of San Francisco. California after 1928. A leather and metal lamp bracket is mounted onto the front of the helmet that holds a carbide lamp. Bullard was one of the first producers of protective hard hats, basing their original design off of the"doughboy" helmets worn by World War I soldiers. The helmet was made of canvas, glue, and black paint, and given the trademarked name"Hard Boiled" in because of the steam used in the manufacturing process to stiffen the leather.Amazing Condition!
Vintage Bell Toptex Helmet Blue/Light Blue WSP Great condition See Pictures
As you can see in the pictures its a great helmet. The gold"P" pins and the silver band is flawless. On the inside it has been marked WSP 175 so Im guessing Washington State Police. The condition is great. The chin strap and all the inside parts are excellent as well. Thanks and I will answer any questions
RARE Surefire Helmet Light Infrared IR HL1-A-TN AOR Navy SEAL Blue LED
This is for a lightly used Surefire Helmet Light. This is the rarest version because it has the Blue LED's It comes with surefire battery and what you see in the picture. This light retails for $199.99 new. This is the prefect light for deployments so both hand can be free without holding a flashlight. This light will shine very bright. You can also purchase a different attachment to hook to the bill of a baseball cap when not deployed. Thanks for looking!
Ach helmet size large with Surefire light SF, CAG, DEVGRU, RANGERS, MARSOC
Used ACH helmet size large. Spray painted OD green. Surefire light is used but works. The light colors are white blue and IR
Child's Bike Helmet- BELL Brand- Racer Stlye. Light blue &pink flower print.
Child's bike helmet. BELL brand. Size 12/10. Fits 50-54 cm. Racer style. Light blue& pink flower print.
SUREFIRE MODEL HL1-A-TN 3 VOLT TAN HELMET LIGHT
SUREFIRE MODEL HL1-C-TN 3 VOLT TAN HELMET LIGHT w/ MOUNT* Light has three white LED's. Two red LED's and one blinking infrared LED. I will call it used because has no box or paperwork/User Manual, but is in perfect cosmetic and working condition. Surefire CR123A batery is included. US shipping only- NO International shipping-
SUREFIRE HELMET LIGHT HL1-C-TN RED WHITE IR USED #K9
D and J's UNIQUE ITEM's Used and Remains in GOOD WORKING CONDITION SUREFIRE MODEL HL1-C-TN 3v HELMET LIGHT TAN THREE WHITE/ TWO RED RD/WH/IR LED's SF 123A BATTERY COMES WITH A NEW BATTERY Compact. Multiple-Output Helmet Light Click to open supersize image Click to open supersize image Click to open supersize image Click to open supersize image Click to open supersize image ~PAYPAL~ Payment due in 3 Days When payment is received we cannot'HOLD' your item or'WAIT' to begin processing your order. USPS PRIORITY MAIL Tracking Number on each package On this Item NO INTERNATIONAL SHIPPING NO APO/DPO/FPO SHIPPING COMBINED SHIPPING(on most items) Items need to be purchased in the same 7 day period We will send you a'COMBINED INVOICE' with appropriately adjusted shipping/handling cost this will show TOTAL AMOUNT ... moreDUE HANDLING COSTS 1.50 for first item 0.25 for each additional item 14 Day Return Policy Refund/Exchange depending on our current inventory We strive to give you QUALITY ITEMS and a SMOOTH. PLEASANT, 5 STAR EXPERIENCE We live and work in a SMOKE FREE ENVIROMENT QUESTIONS? CONCERNS? Send us a message We will Respond If you are not satisfied with any aspect of your transaction or items, please notify us. Together we can work towards a solution. ONE FINAL NOTE We get our items in many differnt ways. From Estate Sales, Surplus Supply Stores, to Active Duty, Retiring/Retired Military Personnel. We do a lot of research when listing items and our best to describe/identify the items accurately for you. Some items may have been exposed to various elements,ie: Adverse weather, Rain, Snow, Dirt, Sand Dust, Extended Storage, Moth Balls, Cigar/Cigarette Smoke, Animals, other offensive Odors to name a few. We do NOT launder or clean any of these items. We leave up to you the buyer.
Vintage 5 Snap Used Light Amber Motorcycle Helmet Flip Up Bubble Shield Visor
Vintage 5 Snap Used Light Amber Motorcycle Helmet Flip Up Shield Visor Great old collectible for the Bike Enthusiast or Man Cave! Lots of Scratches. Made in the USA Other shields listed. Buy them all& save on shipping. Thanks for Bidding! Please check my feedback"Trustworthy" Please stop Back! 4 Days to pay. I combine Shipping on Multi wins or purchases} Just let me know before you pay. I usually offer Parcel& Priority Shipping{ You Decide} Check out my! Be sure to add me to your! The Seller is not responsible for Consequential.Incidental or Punitive Damages of any kind whatsoever.Sellers liability is limited to the amount paid by the Buyer for the item.
MILLER LIGHT INFLATABLE BLOW UP FOOTBALL HELMET 16" wide and 18" height MAN CAVE
Description: Hi. I'm selling a New MILLER LIGHT INFLATABLE BLOW UP FOOTBALL HELMET 16" wide and 18" height MAN CAVE.Please refer to my pictures. If you have any questions go ahead and ask. Payments due in 3 days, please check out my other auctions. Thanks for looking.Happy bidding! WARNING: THIS IS NOT TO BE WORN ON THE head. IT IS A DISPLAY SIGN FOR A MAN CAVE. THIS IS A NEW NEVER HUNG INFLATABLE SIGN. IT IS A BEAUTIFUL FOOTBALL HELMET. ITEM WAS ONLY INFLATED ONCE FOR pictures. Payment Method: PAYPAL Return Policy: Returns are accepted. No questions asked. Buyer pays return shipping. Shipping Info: We ship exclusively with the USPS. No exceptions!
Vintage Buffalo Bills Football Team Helmet Lamp Multi Color Universal Light
Vintage Buffalo Bills Football Helmet Lamp Surface scratches& scuffs from age& use. The harp is rusty& old. Buffalo bills helmut lamp in good working condition. Takes a 60 watt light bulb. Measures 25" tall to finial x 14" long x 9" wide. Great collectible man cave Buffalo bills fan lamp! Check out my other items! Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-14bd2b880f4-0xf7-
SUREFIRE MODEL HL1-A-TN 3V HELMET LIGHT TAN BL/IR/WH LED LIGHT MILITARY HUNTING
THIS AUCTION IS FOR A SUREFIRE MODEL HL1-A-TN 3V HELMET LIGHT TAN BL/IR/WH LED LIGHT. THE SF 123A BATTERY IS NOT INCLUDED. THIS ITEM WAS ACQUIRED AT AN ESTATE SALE. NOT MY PERSONAL ITEM AND IS SELLING AS IS. WHAT YOU SEE FROM THE PHOTOGRAPHS IS WHAT YOU ARE BIDDING FOR. I DO OFFER COMBINE SHIPPING FOR MY ITEMS, BUT PLEASE EMAIL ME FOR POSSIBLE SHIPPING AND HANDLING COSTS DUE TO WEIGHT AND SIZE OF ITEMS. THANK YOU FOR YOUR INTEREST AND GOOD LUCK BIDDING! Stores Check out my! Be sure to add me to your!
GPX Vented Full Face Motorcycle helmet XL Light use! Harley HD sticker
GPX Vented Full Face Motorcycle helmet XL Light use! Harley HD sticker. Light use. Good condition with few small scratches, scuffs from storage and handling. Has HD sticker on back side. Sold as is as found with no warranty's.
arvel Avengers Iron man Mask Helmet + Hand 3D FX Deco LED Night light This is a very"realistic" Wall Deco Light! Uses LED lights and includes'crack' sticker. Wall light mounts on top of crack sticker. Giving the illusion it smashed through the wall. Simple installation; includes hardware& instructions. Battery operated. So there are NO exposed wires! Including: One or Two Wall Light( depends on your choice! Battery not included! Payment We accept Paypal only About Us We have a factory in China to make professional cosplay costumes for our customers all over the world. All costumes we sell are new. Made with standard size or custom-made to your own measurements. Please provide your size according to our"How to measure yourself" guide. We only provide new, custom-made, first class craft-work made by our experienced professional ... moretailors, in your own size. If you need to change color or any part, please contact us. Shipment Shipment will be arranged within 5 working days after receiving payment. Your item will be sent via Standard Int'l Shipping. Your'll receive the item in 7-15 working days after shipment. Return Policy All costumes are made in your own size. Please check your measurements carefully before submitting. We offer refund or exchange/ costume alternation for defective items/ missing items/ items significantly different from our description. Please contact us within 3 days after you get your item. We will give you return instruction after defect proved. For wrong size. Once confirmed the error occurred by our side, we will make a new one costume with free of charge. If this caused by wrong measurements buyer provided, we are not responsible for refund. We ship order to shipping address provided by the customer. Customers are responsible for submitting complete address information required. In the event that necessary shipping information is left off the order during the checkout process. We are not responsible for any additional charges needed to reship or retrieve a package.
Coors Light Authentic Riddell NFL Mini Helmet 3 5/8 size - 5" high x 6" x 4"
This listing is for a used Coors Light Authentic Riddell NFL Mini Helmet(3 5/8 size) It is a used item and does show some signs of wear. There is some scuffing. Chipping and wear that would be expected for a used item. The approximate dimensions are 5" tall, 6" front to back, and 4" side to side. A very nice item for the Coors Light and NFL fan. Please see photos to make your own determination of condition. It comes from a smoke free home. Do not judge condition just based solely on my comments. While I try to give an accurate description. You will need to see the photos for your own determination of condition. Please see all the pictures carefully for condition and characteristics of the item before bidding. If you have any questions, please ask. Thanks for looking. Please make payment within 3 days of auction close. Normal ... more0 false false false EN-US X-NONE X-NONE di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-14bdc96df45-0x108-
RECON USMC HELMET "Large " SUREFIRE LIGHT, GOGGLES MARINES
UP FOR SALE. USMC HELMET IN SIZE LARGE THE HELMET WAS issue to me. HELMET COMES WITH WHAT YOU SEE IN THE PICTURES THIS HELMET WAS painted TAN SOMETHING WE DID WHEN THEY WERE ISSUE TO US. FOR MORE INFO FEEL FREE TO CONTACT ME BEFORE BUYING PLEASE NO SHIPPING OUT OF THE UNITED STATES PAYMENT MUST BE RECEIVED WILLING THEN 3 DAYS
circa 1970'S PAN AM AIRWAYS INSPECTORS HELMET & JUSTRITE LANTERN HEAD LIGHT HAT
YOU ARE BIDDING FOR A RARE HELMET HAT USED FOR MAINTENANCE PAN AM AIRWAYS PERSONAL. THIS IS THE TYPICAL PLASTIC BLUE WORKERS HELMET WITH HEAD LIGHT WIRED TO A BATTERIES FLASK. THE BATTERIES FLASK OR CASE IS MADE IN USA BY JUSTRITE. NO BATTERIES INSIDE. INSIDE THIS FLASK WAS FOUND A FORM( NOW WITH THE SHAPE OF THE INNER FLASK. LONG TIME INSIDE) THIS IS PAN AM FORM ID PART TAG. BLANK BUT DIRTY. THE HAT HELMET IS DIRTY. REMAINS OF GREASE, SCRATCHES. NO SIZE. THE SWEAT BAND AND THE PLASTIC SUSPENSION ARE IN BAD CONDITION. THE HEAD LAMP SHOW SOME RUSH IN BASE AND SCRATCHES. THE SWITH ON-OFF IS WORKING. BUT I CANT TEST THE BULBE, SINCE THE BATTERIES ARE MISSING. BULBE STILL THERE. WIRE FROM FLASK TO BACK OF HELMET IS APROX 35/ 36 INCHES. BACK OF HELMET SHOW PAN AM LOGO IN DECAL( NOT PAINTED) WITH SOME DIRTY AND SCRATCHES. THIS IS A COLLECTIBLE ... moreITEM. NEED PROFESSIONAL CLEANING OR RESTORATION. I AM NOT EXPERT. SO I LEFT THIS TASK TO WINNER. I only did superficial cleaning to perform pictures THIS ITEM CAME FROM STATE OF FORMER ENGINEER INSPECTOR WHO WORKED FOR PAN AM MIAMI CENTER MANY YEARS. I DATED THIS IN 1972. JUST BECAUSE THE TAG CARD INSIDE FLASK IS MARKED 7.72, BUT THAT IS ONLY A REFERENCE. HAT AND HEAD LIGHT COULD BE EARLY THAT DATE. THE TAG IS ONLY A REPLACEMENT PART TAG.
Surefire Tactical Helmet Light Blue White LED IFF Beacon HL1-A-TN ACH MCH Night
Surefire Tactical Helmet Light Blue White LED IFF Beacon HL1-A-TN ACH MCH Night Made of durable glass-filled nylon polymer and neoprene, O-ring sealed. Watertight body, Two toggle switches and a pressure switch for total control, White and blue LEDs and infrared IFF LED beacon, Bidding starts at only $29.99 and ships for FREE to anywhere in the USA. Surefire HL1-A-Tn Helmet Light This compact. Multiple-output Helmet Light in tan features three white LEDs, two blue LEDs, and one blinking red infrared LED that serves as a personal Identify Friend or Foe beacon. The white LEDs are perfect for general-purpose, close-work illumination; the blue lights serve the same purpose in a low-signature, night-vision-friendly color. It attaches via a special mount that clamps semi-permanently to the rim of the helmet by means of two socket-head machine screws. ... moreOnce attached, the light can be easily slid onto the mount, where it locks into place; depressing a small lever slides it right off.
Vintage Autolite Universal Lamp Co Carbide Miners Cap Helmet Light Brass Lantern
YOU ARE BIDDING ON A VINTAGE AUTOLITE CARBIDE MINING LAMP. IT IS IN GOOD SOLID. AS FOUND CONDITION, AND HAS NOT BEEN SHINED OR POLISHED. I LEAVE THAT TO THE BUYER.SO THAT HE CAN RETAIN THE ANTIQUE VALUE,IF HE WANTS. THE BOTTOM CHAMBER SCREWS ON NICELY,AND THE ORIGINAL WIRES ARE ON THE BACK OF THE LAMP TO ATTACH IT TO THE CAP. IF YOU HAVE ANY QUESTIONS, ASK,AND I WILL GET BACK TO YOU. I WILL COMBINE SHIPPING. THANKS FOR LOOKING.
Light Blue Small Skycap Helmet Adjustable RED
(3) BUDWEISER (1) Bud Light BEER Football Bottle Top Helmet Vintage
3) BUDWEISER(1) Bud Light BEER Football Bottle Top Helmet Vintage. Used condition. Item have scrapes and scratches. Please see pictures for details. Each helmet stands approx. 2" tall. FC1001731B40
Tactical Ballistic Helmet 2 Size MED Surefire light NVG Mount OPSCORE Straps
This listing is for a Tactical Ballistic Helmet 2 Used but in GOOD CONDITION. Minor scuffs. See pics. Helmet is a Mitch Cut and a size MEDIUM. Comes with: SUREFIRE LED Helmet Light attached. OPSCORE Retention Strap System is installed. Custom Moveable Pads are atattched inner helmet. NVG(Night Vision Goggle) Mounting Bracket and RHINO Arm Installed. Velcro for Strobe on back of helmet. Hard Shell is covered in Special OPS Camo Pattern.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-14bee97df5f-0x120-
Surefire Helmet Light USGI US Army Tactical LED IFF Tan Sure Fire Flashlight
Item: Surefire Helmet Light USGI US Army Tactical LED IFF Tan Sure Fire Flashlight Condition: Great clean working condition with a fresh battery. Does not appear used. Payment Terms: I accept Paypal. Please pay within 4 days. I will combine shipping on items ending within 3 days. Location: D8
NEW. SUREFIRE 3 VOLT HELMET LIGHT MODEL HL1-C-TN, RED/WHITE/IR LED'S, NEED 1 SF123A BATTERY,THIS IS A GREAT BUY.BUYER PAYS EBAY FIGURED SHIPPING COST.PAY BY PAYPAL.NO CHECKS.U.S. BUYER HAS DELIVERY CONFORMATION ON ALL ITEMS.OVERSEA'S BUYERS MAY HAVE TO PAY FOR INSURANCE ON THEM.SHIPPING PRIORITY MAIL.PRIORITY MAIL INTERNATIONAL 6-10 DAY IS THE ONLY WAY WE SHIP OVERSEA'S NO FLATE RATE NOTHING.ITEM AS IS.THANKS MYESTER69
Extra Largest Air Force Fighter Pilots Flight Light Helmet,Oxygen Mask Head Gear
the set includes mig-21 fighter pilots flight helmet.Oxygen mask,Occipital Bladder size:0# Head circumference 59-61 cm) this is original mig pilots flight helmet. Original and great rarity pilot helmet. A centerpiece for your collection! Produced in very low quantity. they are true pictures! Shipping time is 7-15 workdays with China Post EMS or UPS Good luck and thanks!
Girls Ski Helmet ( Child 8 to 10 yrs of age Light Blue Children)
Girls Helmet. Very good condition. Keeps your head warm and safe. Thank You.
Bud Vs. Bud Light Gumball Helmet Checkers
Up for Auction A Hard to Find Bud Vs. Bud Light mini gumball helmet checkers set. This item is used. But only a couple of the helmets have had the stickers put on them. Items are sold As-Is. PayPal is the preferred payment method. Powered by The free listing tool. List your items fast and easy and manage your active items.
Solara Ultra Light Welding Helmet 981P
| | | | Click to close full size. Solara Ultra Light Welding Helmet 981P. Make: S olara Model: 981P Ultra Light Condition: Used- This item has obvious cosmetic wear(ex: heavy scratches. Cracks, or noticeable marks) but still functions properly. Auction includes: Welding Helmet only No other accessories included Guarantee: 30 Day satisfaction guarantee. Sales tax must be collected for all Arizona. Kentucky, Indiana, Texas, Tennessee, Illinois, Washington, Nevada, and Florida buyers. We are unable to accept orders from resellers. Store | About Us | Shipping | Payment | Terms of Sale | FAQ 01655 016552067010100100 SY Order: 102661 About Us Bid with confidence. World class customer service is always a top priority at Cash America! Cash America Internet Sales. Inc. is an affiliate of Cash America International©, a NYSE company. Affiliates ... moreof Cash America have been operating pawnshops and providing specialty financial services for more than 25 years. Cash America affiliates currently have more than 1,000 locations in the United States and Mexico, operating under the brand names Cash America Pawn, SuperPawn, and Cashland. Please browse through and bid on our items with confidence. By listing our items here we hope to enable the buyer to browse a virtual store with merchandise from various states, and let the deals come to you! Our most important policy is customer satisfaction. Please contact us during or after the auction as we will do as much as possible to make sure you are happy. All items will be shipped quickly and professionally. We'd like to make the buying experience as carefree as possible and want your positive feedback. Our goal is to make sure you'd buy from us again and recommend us to friends and/or fellow eBay users. Feel free to email any questions not answered in the listing. Shipping We ship to all fifty states and any country listed in ebay's Global Shipping program. This item will be shipped via USPS Priority or UPS ground for large items. Shipments will only be made to confirmed Pa
Antique Coal Miner HELMET LAMP - Whale Oil 1800s Mining Head Light
No Shipping to China Payment to be received by me within 4 days. Bidders with unpaid strikes will be blocked. Bidders with zero feedback scores should contact me prior to placing a bid. All international shipments with sale prices OVER $100 will be sent by priority mail; OVER $250 by global express; under $100 can be sent 1st Class Airmail- so contact me for actual cost. Sadly. NY residents must include 8% sales tax or provide a tax number. Please Note: By placing a bid you have agreed to the above terms. Thank you and Good Luck! PayPal—eBay's service to make fast. Easy, and secure payments for your eBay purchases! 16.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E16%3E-14bfc666264-0x103-
VERY COOL COORS LIGHT FOOTBALL HELMET BEERTUBES 100 OUNCE BEER DISPENSER
HERE IS A COORS LIGHT FOOTBALL HELMET 100 OUNCE BEER DISPENSER. I BELIEVE IT IS MADE BY BEERTUBES BUT IF IT MATTERS TO YOU THEN PLEASE RESEARCH IT TO BE SURE FOR YOURSELF, I RECEIVED IT AS A GIFT AND IT WAS USED JUST ONE TIME AND WAS CLEANED, IT IS IN GREAT SHAPE, A FEW NICS HERE AND THERE FROM MOVING AROUND, BUT OVERALL IN GREAT CONDITION, IT IS IN 100% PERFECT WORKING CONDITION, I AM SELLING IT IN AS IS CONDITION, NO RETURNS, NO EXCHANGES, NO WARRANTY, DRINK SAFE, SHIPPING& HANDLING WILL BE $24.00 TO ALL LOWER 48 STATES ONLY, NO EXCEPTIONS SEARCHWORDS: BUDWEISER. NFL, BUD LIGHT, GUINESS, MICHELOB, HEINEKEN ROCKY MOUNTAINS ROCK MOUNTAIN
Surefire Helmet Light HL1-TN-Blue /IR/IR-IFF MILITARY
Surefire Helmet Light HL1-TN-Blue/IR/IR-IFF MILITARY Auction photos show actual light that will be shipped to you! Please note the light piece has some damage over the IFF Switch. BUT the lights all work in white and Blue! Please see all auction photos to see exactly what you are getting! Description per Surefire: HL1-D-TN This compact. Multiple-output Helmet Light features three yellow-green LEDs, two infrared BLUE, and one blinking infrared LED that serves as a personal Identify Friend or Foe(IFF) beacon. The yellow-green primary LEDs are perfect for general-purpose, close-work illumination; the Colored secondary LEDs are for use when low light signature is viewed by the naked eye. Helmet Light features a durable. Watertight polymer body in Desert Tan. Attaches to any Modular Integrated Communications Helmet(MICH) via an included mount. ... moreOnce either mount has been attached to the helmet, Helmet Light can be quickly and easily slid on and locked securely in place. Pressing a lever on the mount unlocks the light, allowing for quick removal. Features Made of durable glass-filled nylon polymer and neoprene, O-ring sealed. Watertight body, Two toggle switches and a pressure switch for total control, BLUE and infrared LEDs and infrared IFF LED beacon, Long runtime from a single 123A battery with 10-year shelf life, Easily removable for servicing or transfer to other helmets, Size: 2.2 W x 2.6 H x 1.3 thick including mount, Weight: 3.1 oz. with battery and mount, Output/Runtime: Desert Tan body color, NO Battery included,
WW1 ERA CAP BADGE ~ SOMERSET LIGHT INFANTRY ~ LONG SLIDER (TROPICAL HELMET)
WW1 ERA SOMERSET LIGHT INFANTRY CAP BADGE AS SHOWN GENUINE ISSUE BADGE. NO MAKERS MARK. LONGER SLIDER(FOR USE WITH TROPICAL HELMET) ALL IN WHITE METAL. IN GOOD CONDITION. WILL POST WORLDWIDE. PAYPAL ONLY
RARE AIR FORCE MIG-21 PILOTS FLIGHT HELMET( light brown.Sunvisor),YM-6505 OXYGEN
The set includes mig-21 fighter pilots flight helmet(1#Oxygen mask, size:1# Head circumference 58-59 Cm) Original and great rarity pilot helmet. A centerpiece for your collection! Produced in very low quantities. Shipping Your order will be shipped the 4 business day after payment is cleared. Shipping time is 7-14 workdays( US UK AU)Epacket or UPS) Economy shipping usually takes about 14-28 workdays to other countries. Standard shipping is 7-14 workdays with UPS or EMS( some countries in South America need more time) I am glad to combine multiple items into the same package for reduced shipping cost. Please request revised invoice when you are finished shopping. I will send you a combined invoice. Payment I accept PayPal. The most trusted payment method. Return policy During the first 3 days after receipt of your product. If for any reason ... moreyou are not happy with your purchase, you can return your purchased item back to us at your expense. Feedback: Positive feedback is welcomed and appreciated.Of course: But if there is any problem.Please contact me before you leave feedback,giving me a chance to explain and correct it. That would be greatly appreciated.
3V Surefire LED Military Helmet Light (SF123A Battery) Combat Helmet Lights
Up for your consideration is a 3V Surefire LED Military Helmet Light In excellent/ clean condition! Item shows no signs of use. Works great with correct size battery. See pictures! Made in USA Takes one"SF123A" battery. Battery are not included. Power Control Details: 2) Manual Slide preferences switches- 1) Main button on top to control Shipping $5.95 Thanks for looking! God Bless!
STREAMLIGHT SIDEWINDER COMPACT BLUE, WHITE FLASHLIGHT, IR LED HELMET LIGHT
this is for a STREAMLIGHT SIDEWINDER COMPACT HELMET LED LIGHT with Red. Blue, white and IR settings. all work as it should and has been tested. It has been battle worn and is still a bit dusty, but can be cleaned up. takes CR123 batteries. the lights are good and bright. if I can find the helmet mounting disc, I will revise and add it to this listing. or to the package if found after it sells. im sure I have it, just don't know where yet. so this is technically just for what is shown in the photos. selling as is, but will refund your money ONLY if it doesn't work when you get it. no international shipping. I will happily answer any questions to the best of my ability and time. And will accept additional information, suggestions, criticism or offers. thank you for looking! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-14c05c61e00-0x116-
Poc Women's Skull Light Ski/Snowboard Helmet Size Medium/Large(55-58cm) Green
Buy With Confidence Poc Women's Skull Light Ski/Snowboard Helmet Size Medium/Large(55-58cm) Green. DESCRIPTION Item Condition: 4 out of 5. Lightly used This helmet is lightly used. With no damage. It has a few very minor scratches, but has a lot of life left. Specifications: Poc Women's Skull Light Ski/Snowboard Helmet Size Medium/Large(55-58cm) Green Tapered PC/ABS shell for resistance and protection Multi-impact EPP liner Comfortable LD foam lining. Removable for easy cleaning Light and detachable neck roll Size adjustment system All items come as pictured unless otherwise stated in this description. Thanks for visiting Gear Rush. We hope you'll be back. Item Condition Scale: 5: New/Mint Condition. Brand new. No signs of use. May or may not come with original packaging. 4: Like New/ Excellent condition. No wear but minor signs ... moreof use evident on close inspection. Item is in perfect working condition. 3: Very Good Condition. Item is starting to show signs of wear but is not damaged in any way. Minimal wear and well maintained. 2: Good condition. Obvious signs of use like rub marks. Scratches, tears, etc. but item is in good working condition. Item is worn but still has plenty of life left. Some items with minor damage will qualify. 1: Fair condition. Item has scratches. Rub marks, chips, dents, tears, etc. that show obvious signs of use. Items with more serious damage will generally be"fair. PAYMENT Paypal is our preferred method of payment. All in state residents within our state. Utah, will be charged state and/or local sales tax at the time of checkout. Payment must be received within 7 days of the close of auction. If payment isn't received within 7 days. The auction will be revoked and a Non-Paying Bidder alert will be filed. SHIPPING Packages are usually shipped within 48 hours of payment receipt(excluding Saturday/Sunday as well as USA Federal Holiday's) All orders are shipped via UPS or USPS and we reserve the right to choose the most efficient carrier. A note about free shipping* We w
Used Size Small Ladies Light Blue Troxel Spirit Riding Helmet
Normal 0 false false false EN-US X-NONE X-NONE You are bidding on a preowned Troxel'Spirit' Riding Helmet- Ladies Small(Light Blue) This helmet uses the Griper Positioning System II(GPS) with a dial to adjust the headband of the helmet to your head size. So if your head size is 21 31/4" to 21 5/8" and/or your hat size is 6 3/4 to 6/78- this is the helmet size for you. The GPS system allows you to adjust a knob on the headband to properly protect your head. This helmet has been very lightly used for pleasure riding has few cosmetic flaws and is fully functional. It will protect the new owner for many years to come. Features: New Mesh Covered Vents Removable Washable Headliner Flip-Fold™ Headliner Extended Soft-Tip™ Visor Durable Outer Shells(Upper& Lower)
Portable light fits on your Helmet For Dark Construction Area Jobs
Good condition Please pay using PayPal within 5 days of purchase.
Surefire helmet light tan white/blue IR IFF hl1a
Up for sale is a sure fire helmet light white blue LED with IR iff on the side the item includes one battery and helmet mount as shown. Item is lightly used with no scratches whatsoever on the unit. If you have any questions feel free to ask Also please note that it says it ships to United States meaning I can only ship this within the 48 states this item cannot be shipped out and exported.
PLAYSKOOL Helmet Heroes Police Motorcycle Cop Electronic Light Sound Interactive
PLAYSKOOL Helmet Heroes Police Motorcycle Cop Electronic Lights Sounds Interactive. Items are used"played with" condition with minor wear and both in working order. Batteries not included.
3x Surefire Helmet Lights Red & White Light. Tactical - 1 Good, 1 Broke, 1 INOP
Item: SureFire Helmet Lights- x3 Color: See pictures- but they're white and red on a toggle switch. IMPORTANT Condition: All three USED& SEE PHOTOS FOR FULL DESCRIPTION. But the specific item details are: Scratches. Dents. Missing/ broken plastic above toggle switch(s) Name carved on side of one helmet light. 1 helmet light completely INOP; no lights work at all. the nicest one of course. 1 helmet light Toggle Switch does not lock into position(light DOESN'T stay on. I hold it on with my finger in the PHOTOS) 1 works great. But horseshoe mount on the underside is damaged. 1 bracket mount is missing adjustment screw/ bolt. Some rust present on bracket screws/ bolts. SEE PHOTOS FOR FULL DESCRIPTION. Photos: Pictures are of the exact item you will receive. Review them carefully. No secrets here! Payment: PayPal only. Must pay within ... more48 hours of lot closing/ ending. If you use the"Buy-It-Now" option. Please pay immediately. If you fail to honor your commitment to purchase the item after you've elected to do so. By any means: Auction, Buy It Now, or Best Offer, I will notify eBay, open a no-payment case, and leave appropriate feedback. I will then re-list the item or offer it to another bidder through the Second Chance Offer option. Shipping: Shipping will be Priority Mail through USPS only. Tracking number will be updated automatically through eBay and immediately visible to you once I print the shipping label. If you can't find it. Please just contact me and I will send it to you directly in a message. Combined shipping is available. If you are going to. Or already have purchased multiple lots, please contact me before or after you pay, but as soon as possible. I'll have to see what type of box everything will fit in and re-calculate the shipping cost. If in fact combined shipping is possible and it does save money, I will either send you an invoice to pay, or send the discounted amount back to you through my PayPal. I will not cover PayPal fees for refunded amounts of any kind. If you
|
en
|
Mysterious Secret Tunnel Discovered Under Ancient Pyramid in Mexico | Most Interesting Things
It seems that we make amazing discoveries at different ancient sites, such as Mexico's Teotihuacán when we embrace advanced archaeological technologies.
Just recently, in the ancient city of Teotihuacán, northeast of Mexico City, archaeologists reported discovering a hidden tunnel created under the famous Pyramid of the Moon.
In Teotihuacán, the Pyramid of the Moon is the second largest structure to be seen. Hidden for centuries, according to archaeologists, the underground tunnel may represent the underworld as a part of the pre-Colombian civilization's ancient belief system that once flourished here.
The site was most likely founded 2,000 years ago by a culture dating back to the Aztecs, who later occupied Teotihuacán.
According to National Geographic, the tunnel extends in length from the central square, known as Plaza de la Luna, and goes toward the nearby pyramid. It is at a depth of about 33 feet and is similar to few other tunnels that had been discovered in the past.
The Pyramid of the Moon, as the second largest pyramid after the Pyramid of the Sun, imitates the contours of the mountain Cerro Gordo, that is just north of the site. "Tenan" is one more name used for the site by some people, which in Nahuatl (Aztec) means "Mother of protective stone." Estimates suggest the massive structure was built sometime before 200 AD, making it older than its bigger counterpart, the Pyramid of the Sun.
Tombs found in the location have contained human skeletons, but also a variety of animal bones, obsidian blades, pieces of jewelry and a number of other types of offerings.
Despite all finds so far, many questions concerning Teotihuacán's history and culture still need to be answered.
|
en
|
Backyard Aquaponics • View topic - License for selling home grown food in NSW?
View unanswered posts | View active topics It is currently Aug 7th, '20, 23:17
License for selling home grown food in NSW?
Post subject: License for selling home grown food in NSW?
Posted: Nov 14th, '14, 07:16
Joined: Oct 20th, '13, 21:42
Hi guys, I've copied and pasted this as I asked it on an old thread and wondering if that means it won't get any attention, so reposting on a new thread. I hope that's ok. Admin can delete one or the other if they like (FYI it was in one called 'Selling Produce'). Thanks!
We're just beginning a mobile wood fired pizza business and hoping to grow all the tomatoes and capsicums and garlic and whatever else we need ourselves. And just preserve however to use throughout the year (since once the frost comes it will wipe out the summer crops). We will also sell to the public whatever excess we have, just on the corner of our MWFP stall.
Does anyone know if I can do this in NSW without any kind of license? I'm assuming I can, because all my digging hasn't turned up anything apart from this:
http://www.foodauthority.nsw.gov.au/ind ... GU7nMn4WKK
That 'list' doesn't apply to us, so I assume we don't need a license. But in the world we live in, full of red tape (and gosh I'm going through my fair share of it with the 'food safety' stuff for the business) then I find it hard to believe I can get away with growing fruit and veg to sell, and then cook and sell, without having to notify someone, have some inspection or pay some fee.
Obviously I'm not talking about using fish from the aquaponics. I know licenses are required for that sort of thing.
Our aquaponics system still isn't mature so only part of the produce will come from that, the rest out of the ground. But we're aiming for in the future to grow all our fruiting and leafy vegies in the aquaponics eventually.
Thanks for any incoming insight.
Post subject: Re: License for selling home grown food in NSW?
Posted: Nov 14th, '14, 09:46
Sorry, I can't help with the food...
Well, I probably can since I'm a chef and half my life is consumed with food safety regulations. Check your local council regulations, as each council is different with what they consider home food business. Some will make you section off part of your house, or have a seperate room outside. Some will let you use your domestic kitchen.
Most restaurants I've worked at, we've always had a vegie patch out the back, mainly for herbs/chillies. And we've had many health inspectors through without any issues, so I wouldn't worry too much.
If you're too worried, ring up the local health inspector, and ask them directly.
What I wanted to ask. How a home pizza oven business work? A home delivery pizza business? If so, that's where it gets trickier with transporting food. But dominos seem to have dodgy cars driving around delivering, so it must not be too hard.
Posted: Nov 14th, '14, 10:03
Naturally - it depends on to whom you are supplying/selling..
The bottom line is that if you run a business (ie.. manufacturing and selling) then you need to be registered, and someone knowingly buying from you is guilty of an offense if they know that you are not registered..
When registered, (ABN) then you would likely have some rules associated with food production..
It might be that it is a LOCAL government (Council) issue at a basic level..
but my reading of that NSW Govt. site, would make me think that it does cover you, in that technically, you are supplying yourself a raw product..
Some may be preserved, but that only means a value-adding processing..
Look - you might get away with it, but be prepared..
When your come under consideration for producing Pizza's, I would BET they would ask about the origin of raw materials..
The silly part is that you could buy the produce from COLES and there would be no further issue..
Posted: Nov 14th, '14, 14:08
Dont need a license to sell fresh fruit and veg but if you are going to cook or prepare it them you do need a registered kitchen or equivalent.
Posted: Nov 14th, '14, 15:21
We won't be selling pizza from our home. The oven is mounted on a trailer. We'll go to events, or set up at a local park a couple nights per week (we have council permission and have to rent the space and pay for electricity etc).
The prep of food has to be in an approved kitchen, yes. We will begin prepping in our friend's butchery which is approved. We hope to convert a caravan into a commercial kitchen, once we've made some money back. The other option is re-doing our own kitchen, but we may be selling in the next 2 years or less so want to be able to take the commercial grade kitchen with us (caravan) and also, I don't really want a commercial kitchen in my home for various reasons.
So the only question really is about the selling, or cooking and selling, of the vegetables themselves.
I've asked my contact on the council but haven't heard back. I'm pretty sure she'd just refer me to that link I linked in the last message anyway.
Unless I'm told otherwise, I'll go ahead with it. I wouldn't say that unless I was almost certain because I do not like to take the rules lightly, however ridiculous they might be at times.
Posted: Nov 14th, '14, 16:05
We have just been talking about the fruit and veg.
Fish is a whole other matter.
However from my understanding in Victoria you could sell the fish if they were transported live to the registered kitchen and you could then sell them cooked under your licence with the council. You couldn't sell them fresh though because then you need a retail seafood license.
|
en
|
3@3 on Solar PV: REWI Wrap-Up, Rick Perry, Tax Credits – CSRA Lights
Jenn Runyon, Chief Editor of Renewable Energy World and Paula Mints, Chief Market Research Analyst with SPV Market Research discuss three hot topics in the global solar industry for three minutes each. Today's topics include a wrap up of the REWI conference, how Rick Perry could change the U.S. Department of Energy and solar tax credits. Check it out.
|
en
|
Tales to Astonish # 24 CGC 7.0 CRM/OW (Marvel, 1961) Atlas pre-hero
Tales to Astonish # 24 CGC 7.0 Cream to Off-White pages (Marvel, 1961). Thanks for checking out this listing, which is for a sharp copy of Tales to Astonish # 24 graded by CGC as a 7.0 with Cream to Off-White pages.
This Silver Age beauty is a tough Marvel pre-hero book in solid collectible grade. Please keep checking back as we update our Store with hundreds of new listings from the Golden through Modern Ages. If you need us to delay your package for instance, you are out of town for a few days, etc. , we will be happy to accomodate your requests.
It's been great seeing the Copper Age comics of my youth finally get the recognition they deserve by a new generation, as well as witnessing the heroes of comic lore dominate the big screen in a way none of us collecting in the 80s and 90s could have ever imagined. We are living in the Golden Age of our hobby... Yep, we've been here a long time and have a lot of happy customers. We'd like nothing more then to add you to our growing list of satisfied buyers. The item "Tales to Astonish # 24 CGC 7.0 CRM/OW (Marvel, 1961) Atlas pre-hero" is in sale since Saturday, May 20, 2017.
|
en
|
Solid customer support goes a long way and Smarkets is definitely on the ball. With multiple ways to get in touch and an incredibly helpful team, players can safely bet without worrying about what will happen if something goes wrong or is not understood.
|
en
|
Browse All : Mangroves%2C Topography%2C National preserves%2C National parks%2C Forts%2C Skirmishes%2C Camps%2C Towns%2C Villages%2C Military campaigns%2C Landings%2C Navigation%2C Captain Wright%2C Waterways%2C Military maneuvers%2C Naval by Endicott%2C G. %26 W. of Lake Worth and Florida - Touchton Map Library
Browse All : Mangroves, Topography, National preserves, National parks, Forts, Skirmishes, Camps, Towns, Villages, Military campaigns, Landings, Navigation, Captain Wright, Waterways, Military maneuvers, Naval by Endicott, G. & W. of Lake Worth and Florida
|
en
|
boudin LEFT MENU
"I figure that about 80 percent of the boudin purchased in Louisiana is consumed before the purchaser has left the parking lot, and most of the rest is polished off in the car. In other words, Cajun boudin not only doesn't get outside the state; it usually doesn't even get home." – Calvin Trillin, from his essay, "The Missing Links: In Praise of the Cajun Foodstuff That Doesn't Get Around."
Food is a tie that binds, a constant, an equalizer, or in the words of James Beard: "Food is our common ground, a universal experience." Food can also function as one of the defining characteristics of regional and cultural identity. Boudin, a unique but simple culinary concoction of pork, rice, onions and various other herbs and spices squeezed in to a sausage casing and served hot, is one of those foods.
Throughout the area defined as Acadiana or Cajun Country, of which Lafayette is the hub, boudin is ubiquitous: Signs and banners signal passersby to stop and grab a link of HOT BOUDIN where it will be pulled from a steamer or slow cooker, weighed, wrapped in butcher paper, and usually handed over along with some napkins or paper towels so it can be eaten right on the spot. Displaced Cajuns frequently fill ice chests with links from their favorite boudin spots and relish the opportunity to share them with the uninitiated in other places. In Acadiana, boudin inspires fond memories of good times with family and friends as well as heartfelt debates about whose recipe is "best." To say that folks in south Louisiana are passionate about their boudin is an understatement. Perhaps obsessive is more appropriate, since in-depth discussions about the crispness of the casing, rice to meat ratio, eating method, appropriate spice, and best texture are all too common when people start talking about their favorite "link."
Although the archival record may never reveal the precise origin of Louisiana's boudin sausage, we do know that it traces its culinary lineage, like the Cajun people trace their ancestry, back to France. The French eat a sausage called "boudin blanc" (white boudin) which is similar to Cajun boudin almost solely through its nomenclature; for French boudin blanc is a highly perishable sausage made with pork, chicken, and/or veal mixed with milk, cognac, and spices. While this is certainly a delightful treat, its flavor bears no resemblance to the link you will sink your teeth into in Louisiana. When the French Acadians (today's Cajuns) made their way out of Nova Scotia, after having been expelled by the British in 1755, they adapted their traditions and culture to their new surroundings. Many made their way to the bayous, prairies, and backwoods of Louisiana where surviving required ingenuity, flexibility, and creativity. So, when they set out to make use of a freshly butchered hog, and to make good use of every single part of that animal, it wouldn't have been such a stretch for them to mix the pork scraps with the seasonings at hand, push it into the hog's intestines and call it what they had always called such a sausage: boudin. The German immigrants who arrived in southwest Louisiana during the 1720s brought with them a talent for sausage-making and certainly also affected the region's boudin traditions. Later, once large-scale rice production began in Louisiana at the end of the nineteenth century, cooks added rice to boudin for filler and flavor. Today in places like St. Martinville, at La Grande Boucherie des Cajuns (a communal hog butchering) held the Sunday before Mardi Gras, the age old practice of making boudin is embraced and the custom and community spirit continues to be passed from one generation to the next.
Regional variations exist from parish to parish and neighborhood to neighborhood, but the best links always come from specialty meat shops, grocery stores, and restaurants that make it in-house. You are as likely to find a true boudin craftsman in a gas station convenience store with an added kitchen as you are in an established meat market. For many, boudin is the essential Cajun fast food, quickly filling the hunger void at any time of the day or night. However, the most common time to eat a link is in the morning, and many Cajuns refer to a cold soft drink and a link of boudin as a "Cajun Breakfast." But this porky pleasure is more versatile yet, including a myriad of variations worth trying. Boudin rouge (red/blood boudin: made with copious quantities of pig's or cow's blood) is hard to come by these days since modern health codes make the process too complex to be profitable for most producers, though we do include a couple of oral histories herein with makers of blood boudin. Some people, particularly transplants from Texas, insist on grilling or smoking their links. Boudin balls are made by rounding the sausage filling into balls and then breading and deep-frying it. A boudin sandwich, primarily made at home, is the filling smeared between two pieces of white bread. Boudinalaya (a twist on jambalaya) is a budding new variation. And many boudin stops tout nouveau fillings: shrimp, crawfish, seafood, chicken, and even alligator. New-fangled creations pop up all the time.
To begin understanding why such a simple food gets so much attention in Acadiana, one must venture out, oftentimes into the countryside, to meat markets and corner grocery stores where boudin craftsmen, or as some call them, boudiniers, employ generations-old recipes to make a product so versatile that it is as properly enjoyed as a meal-on-the-go as it is stuck with toothpicks and served from silver platters at the finest wedding receptions. Still, when it is all said and done, at its best, boudin is about tradition as much as it is about taste: the links shared between a father and son on their way to the duck blind, between buddies as they venture out on an early morning fishing trip, or between friends who set out on a Saturday morning "boudin run" become ritualistic. George Bernard Shaw may not have been referring specifically to boudin when he said, "There is no love sincerer than the love of food," but in south Louisiana he certainly could have been.
Click here for a boudin bibliography.
Bob Carriker is a history professor, SFA member, and boudin-lover. He is also co-creator of , a comprehensive taste guide to boudin in south Louisiana.
|
en
|
What Is Antivirus Computer software? - Key Meditation
The term "antivirus software" refers to a wide variety of pc security applications. While malware is the most prevalent term used, that actually refers to all types of reliability threats. A large number of security corporations use the term "antivirus software" to be a marketing term, and customers often assume that viruses are synonymous with these programs. However , antivirus software defends against a number of types of via the internet threats, and therefore should be an integral part of your overall protection strategy.
Anti virus software needs to be compatible with the operating data room system. You should look for one that ideal for different operating systems, including Windows and MacOS, or it may not always be compatible with your laptop or computer. If you are uncertain whether the antivirus method will work on the specific product, read client reviews to determine what kind of compatibility issues it has. Even though antivirus application is generally liberated to download and install, it can carry adware and spyware that can damage your computer.
Several antivirus computer software may rely on behavior-based detection, which evaluates the behavior of the object and infers it is malicious intent from many observations. When a code makes an attempt to perform bizarre or unauthorized actions, it's most likely malicious. Manners that signify a potential threat include changing system configurations, modifying numerous files, monitoring keystrokes, and remotely connecting to the laptop. Some anti virus computer software may even find a program it's not malicious if it's harmless.
|
en
|
I knew it had to happen, but it didn't make the blow land any lighter. Wacom has come out with a new, bigger, better Cintiq. The 21ux has a 21" 1600x1200 screen and 1024 levels of pen sensitivity. When it comes to a drawing surface more is definitely better. I wish I had a whole drawing table's worth of display tablet.
Of course there's nothing really wrong with my trusty 18sx. It meets my needs perfectly well. But I can't help the way I am. Knowing there's something better than mine makes me feel... lessened.
If you've been wanting to support Unshelved in a very special way, this would be it.
Today Sara took the kids and gave me a whole day to work on the book. It was a big success. The entire comic book is now scripted, layed out, and lettered. I just need to review the final wording with Gene and then I'll get drawing. We are on target for my goal of sending this off to the printer in mid-April.
More to the point, it's a funny script, if I do say so myself. I laughed out loud several times while I was writing. You might think it's a little, well, egotistical to laugh at your own jokes. But really, if I don't think it's funny who will? Anyway, a lot of them were Gene's jokes. I was just putting them in context.
|
en
|
During this trimester, you are likely to see your health care provider every month. At these visits you will be offered some screens and tests, and possibly an ultrasound. Also see first trimester screens and tests, which includes a list of questions to ask at your appointment. Keep track of your tests on this prenatal screen and test record.
Screen or test
Why it may be offered
Amniocentesis: Using ultrasound, a doctor removes a small amount of the amniotic fluid that surrounds your baby. This fluid contains your baby's cells. These cells are grown in a culture, and the chromosomes are studied. The fluid is also checked for AFP, which is a protein your baby makes.
If your family history indicates additional concerns, other DNA or biochemical tests may also be done.
It is used to determine if your baby has a specific chromosome problem. The concern may be related to your age, family history, the results of a screen, or other factors. The AFP is measured to help identify if your baby has an "open" type of defect of the spine, like spina bifida.
This diagnostic procedure is usually done between 15 and 18 weeks. American College of Obstetricians and Gynecologists (ACOG) supports this option for all pregnant people.
Multiple marker screen (also known as a quadruple test): Blood is drawn from your arm and tested for several proteins made by your baby and the placenta. Currently these proteins include AFP, HCG, estriol and inhibin.
These measurements can help identify most pregnant people who are at increased risk of carrying a baby with Down syndrome, trisomy 13 and trisomy 18.These are the most common types of chromosome abnormalities.
Those who are at high risk are offered amniocentesis to determine if there really is a problem.
An increased AFP level helps identify most babies with openings in the skull, spine (spina bifida) or abdomen.
This screen is usually offered at 15 to 18 weeks. ACOG supports this option for all pregnant people.
Ultrasound
This ultrasound will assess the well-being of your baby. It will evaluate your baby's size and position in your uterus, your ovaries and cervix and the number of babies. It may also be able to tell you the gender of the baby.
It may also identify birth defects. Ultrasound is not perfect and not all birth defects will be recognized with ultrasound.
It is usually done around 20 weeks of pregnancy.
Cervical evaluation (cervical length ultrasound): This is an ultrasound designed to look at the length of your cervix. It typically uses a vaginal transducer to get the most accurate measurement of your cervix. If you have a history of preterm birth or other risk factors for a short cervix, you may have more frequent evaluations of the length of your cervix between 16 to 23 weeks of pregnancy. This may help determine your risk for preterm delivery. A short cervix may lead your health care provider to recommend additional treatment.
One-hour glucose screen: One hour after you drink a very sweet drink, your blood is tested for the amount of glucose.
To screen for gestational diabetes, the kind of diabetes that can develop during pregnancy. It is done at 26 to 28 weeks. If this screen is positive, a three-hour glucose tolerance test is recommended.
Three-hour glucose tolerance test: Your blood is drawn and tested before you drink a sweet drink. Then, your blood is drawn and tested once an hour for three hours.
To determine if you have gestational diabetes. This test is more sensitive than the screen and requires that you fast overnight.
Sequential (or integrated) screening: This test combines measurements from two blood tests and a first trimester ultrasound. To estimate the chance that a baby will be born with Down syndrome, trisomy 13, trisomy 18, or an open neural tube defect such as spina bifida.
Source: Allina Health Patient Education, Beginnings: Pregnancy, Birth and Beyond, eighth edition, ob-ah-90026
|
en
|
Rhyming Reels Georgie Porgie > Play for Free + Real Money Offer 2021!
Rhyming Reels Georgie Porgie – Summary of the Game
Remember Georgie Porgie? The young lethario who kissed the girls and made them cry? He's back in slot form! This nicely animated slot has some serious bonuses to boot, including a 97,500-coin jackpot, 25 free spins and 25x multiplier! Play a demo right here.
If you're excited by this game and would like to play for real money, head over to Casumo Casino, our top choice Casino for October 2021.
Rhyming Reels Georgie Porgie Free Play
Rhyming Reels Georgie Porgie RTP & Symbols
Real Money Casinos to Rhyming Reels Georgie Porgie
This Microgaming slot is played out of 15 pay-lines with a nice spread of betting options over its 5 reel formation. The games logo represents the Wild symbol and substitutes for all regular symbols other than the Scatter. A 5x multiplier is applied to all winning combinations it's is part of and the games jackpot of 75,000 coins is paid out when 5 Georgie Wild hit the reels. If a Wild triggers a win during free spins a 25x multiplier is awarded! The higher the wager the better since bonus wins depend on your total line bet. Georgie Porgies Scatter symbol is a minty breath spray, this triggers free spins when 3, 4 or 5 appear anywhere on the reels, winning you 15, 20 or 25 free turns respectively. Free turns are subject to a 5x multiplier. Although free spins can't be retriggered, every individual Scatter that lands during the base game awards you an extra free spin and landing two doubled your total bet.
Multiplier Yes: 25x
Gamble Yes: double or triple wins
Free Spins Yes: 25 turns
Maximum Win Yes: x97.500 coins
Special Features Yes: 97.500 coin jackpot, 25x multiplier
Georgie 6 30 300
Predator 5 25 250
Crying girls 4 20 200
Jocks 3 15 140
Georgie 2 10 80
Conclusion – Niche Theme With Many Exciting Bonuses
Rhyming Reels slots are part of a series produced in Microgaming casinos, these games take popular children's nursery rhymes, add a drop of humor, and put them in a more contemporary setting. This edition features an American high school campus. The reels are set within a book, referring to the original rhyme with symbols illustrating the story of Georgie Porgie kissing a girl and making her cry then of course the jocks coming to their rescue, chasing him away. The theme in this particular edition while eyebrow raising is certainly entertaining, and considering the scope for personalization regarding selectable lines. There's a wide stake range between £0.01 to £150.00 per spin therefore this game is suited to players of all budgets. Although the premise of the game is pretty basic, the 25x multiplier is bound to capture your attention and if you're at the top end of the betting range, you're looking at a jackpot touching on 75,000 coins. If you've played this controversial slot before and would like to join the critique feel free to use the comments section below.
|
en
|
Sterling Silver with 14kt Rose Gold Plated Accents Engraved Circle Pen
Sterling Silver with 14kt Rose Gold Plated Accents Engraved Circle Pendant
SKU: HSJHHP017RSE
Circle pendant with hand engraved Hawaiian heirloom scroll detail and fleur de lis inspired bail. Pendant with bail measures 25mm (1 inch) tall and circle is 19mm (0.75 inch) in diameter. Sterling silver with 14kt rose gold plated accents. Please note, the measurements listed do not include the bail unless otherwise noted. Furthermore, the picture shown is not a true depiction of how large/small the items is. Please refer to the measurements for accurate size. Mahalo~
|
en
|
An Open Letter of an Indian Prostitute
By Staff Feministaa in Fashion & Lifestyle 11/01/2016
Many people have asked me, what's the price? What's my quote?
Someone shouted "Boom Boom" on the streets ; that's a shout out for me!
In school, there were many boys trying to hit on me. Some younger and some elder to me. I loved the attention. My friends and I would laugh at them, saying "booty calls". I rejected so many of them, labelling them as "rebounds".
It would make any girl happy to get this kind of attention.
After all, not everyone is gifted with good looks. And even if they are, not every girl knows how to handle it!
Last night, I saw a really cute guy pass by. Driving a big car, a bit tipsy but sane enough to drive. I wouldn't mind going with him… But he looked right through me. I understood, my clothes are now too tacky for someone like that. Usually I walk up to clients, but today I felt shy. The same feeling lingered inside when I had my first crush! It's amazing to see, that even after all these years, I can have such feelings.
My grades were always average. But I was content. I was never too ambitious, and my parents were okay with it! Especially my doting dad. His expectations from me were so simple!
All he wanted to see, was my smiling face, and his day would be perfect! But I never knew he would leave me midway, completely stranded. I was all by myself. I felt helpless and needy. But then I felt liberated, I felt free and powerful. But there were questions I needed answers to. I saw my mother with strange men but I never asked her anything, thinking she might feel offended. It was only later I found out she chose this path to feed me.
When papa passed away, mom and I were taken into the shelter of my aunt. Mom's first cousin, and the only relative who was super enthusiastic to help us. She took my hand and told me, that she would sponsor my education. Little did I know that she would introduce me to teachers who would encourage me to love my body more than my books. They made me feel beautiful about myself but then I understood the reason behind that the noble deed.
All they wanted for me, was that I should be able to sell myself right.
My aunt taught me how to lure, what to say and how to get a man's attention. Ever since, I feel like this is what I'm born to do. Yes, it sounds sad and depressing that I have chosen this life for myself but even If I want to, I cannot get out of it. Its like a trap and I feel that now, there is no way out.
The money keeps me going, and I know since I'm not well educated, I won't be able to earn as much as I do currently. I wish someone had given me the right advice at the right time.
Some people might find my job disgusting but its actually just a job.
They don't understand that we were not born this way, we were made this way.
We were made to believe that this is the right path and we were too young and naive to take a decision ourselves.
Well, this is life and I don't like to complain. I try to enjoy my work just like everyone does. The good part is that I can handle my expenses and I feel independent. But, I have a vision for my future. When I have enough money, I want to travel to a different country. I want to meet people who don't look at me the way people look at me here. I want a new identity and I want to feel free without any eyes judging me for my work. I wish that day comes soon when I feel like a clean slate. I have a dream to start my own family and be a mother. I don't fancy big things in life, I want to live the little joys every girl does.. A romantic moment, the knots at love at first sight, midnight cravings and a hubby who pampers, an anxiety before getting married, the agony of choosing work over family, or maybe vice versa….
After all, you have one life and what you make of it is upto you.
Tags: beautiful dreams empowerment expectations identity indian culture Indian prostitutes indian society indian women indian working women inspiration is prostitution a choice? job liberation life marriage open letter open letter from a woman open letter of an Indian prostitute Prostitution prostitution in india women
|
en
|
*** HOTEL SCANDIC SONDERBORG, SONDERBORG ***
Scandic Sonderborg Sonderborg Scandic Sonderborg Sønderborg Français Español Italiano Nederlands Português Svenska Scandic Sonderborg Sønderborg Čeština Українська Magyar Polski Ελληνικά 日本語 简体中文 한국어 Русский עברית Türkçe عربي
Ellegardvej 27, Sonderborg, Denmark
Scandic Sonderborg Hotel is a 3-star venue positioned about 28 km from Grenz-Pavillon Anna Poetzsch.
The city center is about 30 minutes on foot. The property is 80 km away from Ribe, within a 60-minute drive.
There are bright rooms with free wireless internet, heating, television, armchairs and ironing facilities provided for travelers staying in Sonderborg. Guests will also love a shower, a hairdryer and complimentary toiletries bathrooms equipped with a shower, a hairdryer and complimentary toiletries.
Residents can have breakfast in the lobby. The hotel features a garden restaurant serving international cuisine. McDonald\ offer an assortment of dishes within 700 meters of the property.
There are allergy-free rooms, a car park and a souvenir shop provided on-site.
Guests with children at Scandic Sonderborg Hotel can take advantage of cots and an arcade/game room. The hotel offers fitness classes and a gym to ensure active guests' pastime.
|
en
|
Necessary Decisive Factor Of Recruitment – Modern Opportunities | Veterinarian Gallaecia
Necessary Decisive Factor Of Recruitment – Modern Opportunities
It wouldn't seem ok does the product? You would assume if someone can be a stellar musician that is all prizes that's consistently which experts claim stands the commandant board may an top candidate; or and perhaps not. They are likely awesome over managing their activities yet; exactly how could they experience enjoyment managing an actual team linked with recruiters who don't put on the precise commitment also work ethos they perform? Because just telling people to, 'just get lets start on it' at any time works over the years. If they are considered the type of person that for you to take fees that, surprisingly, does probably not bode sufficiently either. Fertilizer are quite opinionated, brusque so a wide angled rule attached to thumb; eager. Great sales people yet they do not have the insight then wider eyesight to a person to take the company forward.
But this way of reasons should stop; HR could be tough stemming from the picks that is actually made coverage it in order to clerical additionally administrative campaigns right the jobs consumers in Time are hard thanks that would new communities and technological advances. One such technology that has became popular found in Administration in addition to Human Elements is each of our recruitment apps. Through the use of i would say the recruitment software, one involving the activity of its HR will made challenging. There is no longer bother to handbook look and after that screen continues. The software will all undertake that, therefore , making engaging with and recruitment easy and even convenient.
You might increase well-being and encounter less interruption. There could be no delay about it; a extraordinary turnover sparks quite any kind of a bit connected distraction one other employee members. On that point there are situations floating close by about reason why the administrator member left, if your ex boyfriend was terminated, if and then there is on course to just be layoffs, and so forth .. If the situation is case even you needed to eliminate the employees member, (even if the most important staff user had that will be changed because an individual got getting this done wrong implies of poor recruitment interviewing skills) other employees members does wonder which is next? Until this distraction slows down morale and simply can in a harmful way impact that entire retail. When your right users are place, spirit is excessive and high is a great deal of less interruption.
A uncomplicated version, สมัครงาน to obtain your front around undeniable fact that marketing can be creating interest your services. In the issue of recruitment we 're talking inside two on the sides service offering; focused in attracting both the clients not to mention great prime candidates. Studied too a large number of industries besides the unique group of challenges.
So are usually the the 4 key locations to concentrate on your recruitment training roughly? They are the exact vital few. Knowledge, Skills plus Attitude. Together with yes families can display all two to three of a lot of these.
Three room ) Mix using a sorority. Give it some thought. An contest with often of ladies (normally the main prettiest women's on campus) is certain to attract quite a bit of everybody. Also, it will are a ton to fun these your two brothers. This is a no-brainer for the perfect recruitment perform.
Do have got any programs qualifications? Even specialist skill sets like MBTI, Business consulting, NLP, progressed communication skills, what have become their record coaching elements? Have they any experience of executives training to have recruitment companies, vital any time a plan for you to grow company to emerging heights. Your concerns to raise and become answers to positively before you progress forward.
|
en
|
Review: Drunk Elephant's Virgin Marula Luxury Facial Oil — Coffee With Annie
Mar 26 Review: Drunk Elephant's Virgin Marula Luxury Facial Oil
After I finished my moisturizer last month, I started searching long and hard for something hydrating, yet lightweight for my skin. Given that I have very oily and sensitive skin, I have to find the perfect moisturizer that can give me a hydrated glow without breaking me out. Everything almost always clogs my pores the moment it touches my skin, but for once I may have found my holy grail moisturizer!
By moisturizer, I mean face oil. I've always been skeptical of face oils because, why would you ever want to put more oil on your face when it already produces its own oils? Boy, was I wrong.
Drunk Elephant's Marula oil is a god send. This was also my very first Drunk Elephant product! I've always silently followed this brand, but I've now bit the bullet and tried their oil. My only regret is that I wish I purchased this sooner!
The bottle comes 2 sizes: 0.5 oz/15 ml for $40 and 1 oz/ 30 ml for $72. I purchased the 15 mL size at Sephora. I decided to go for the 15 ml because a little goes a long way! But I will be purchasing the 30 ml once I finish this one. It's just that good.
This oil has visibly reduced fine lines on my face, made it plump and hydrated, and has overall helped me with my eczema flare ups that I have on my face. (Especially in this spring weather.) What I LOVE about it is that it's NOT greasy at all! It's crazy fast absorbing and does not clog my pores. Again, I have VERY oily skin and this has really helped balance out the oil production on my face.
Ingredients: 100% Unrefined Sclerocraya Birrea (Marula) Kernel Oil
This oil helps nourish and rejuvenate skin for a more youthful glow while providing antioxidants and omegas 6 and 9.
"This amazingly absorbable oil delivers clinically proven results to reverse visible signs of aging, as well as antioxidants to combat environmental stressors and free radicals. Look for a noticeable reduction in the appearance of fine lines, wrinkles, redness, and blotchiness, with an improvement in skin's elastic feel. Your skin will drink in this nutrient-rich oil leaving no residue behind. Straight from the "pip" of the marula fruit, this Marula Oil is virtually untouched by any chemical or fragrance, natural or synthetic, remains in its purest form, and is naturally anti-microbial and appropriate for all skin types—including the most sensitive."
Apply two to three drops evenly to face, neck, chest, hands, cuticles, backs of arms, or any place needing increased moisture without any greasy residue. 3 drops usually covers my whole face down to my neck.
Apply one to two drops under eyes to help minimize fine lines and rejuvenate fragile skin.
I have also used this in my hair for getting it detangled and soft.
The bottle comes in a dropper style bottle which is super convenient for a product like this. It's mess free and it can be easily applied to your face! I use the dropper and squeeze about 2-3 drops directly onto my face and massage it in gently in upward circular motions.
Already after ONE drop, you can already see the oil penetrating fast and deep into my skin for the best hydration ever. Imagine what this will do to your face! This oil is also vegan, fragrance free, essential oil free, and silicone free. After the first night of using it, I didn't see any signs of irritation or any breakouts! This product is an A+ for ALL skin types.
If you're skeptical about putting even MORE oil onto your face, I say at least get a sample of this and try it out! This product is a holy grail for tons of people with dry skin, but it is light enough for all skin types. This is the product you apply for that baby soft, glowing skin without any effort of applying on makeup.
Inside the box, it also comes with a small pamphlet that has more information on the marula oil and showcases all of its other products too! This is only my first product from Drunk Elephant, but I'm excited to buy more.
I am so happy with this product because although I've used many moisturizers, I've yet to find one that sinks deep into my skin while soothing my eczema. This oil is so versatile, lightweight, and gentle, I really think this bottle should be a staple in everyone's skincare routine.
You can purchase it on Sephora's website here or purchase it straight from Drunk Elephant's website here!
(I am not sponsored by any of the brands nor am I affiliated with any of the brands listed above. Thank you for reading & take care! ♡ - Annie)
|
en
|
There's yet another PC witch-hunt underway, this time in Michigan, aimed at Dave Agema, one of the state's Republican National Committee members, who among other sins has dared be unenthusiastic about Muslim immigration.
And, yet again, the GOP Establishment is falling over itself to join in: Amway plutocratess Betsy DeVos [Email her] has demanded that Agema resign or be forced out. [Betsy DeVos says GOP should dump Agema; implies financial 'consequences' for intolerance, by Garret Ellison, MLive.com, January 19, 2014].
DeVos' political judgement can be gauged by the fact that her last appearance on VDARE.com was when, as chairthing of the Michigan GOP, she opposed Ward Connerly's drive to get an anti-Affirmative Action initiative on the state ballot. Reportedly, she feared it might harm (!) her husband's campaign for governor. In 2006, a bad year for the GOP thanks to the Bush blight, Connerly's initiative carried overwhelmingly; needless to say, Mr. DeVos lost.
Agema was also attacked, albeit indirectly, by GOP Governor Rick Snyder in his January 16 State of the State speech:
...Snyder leveled a half-veiled criticism of anti-gay and anti-Muslim posts that Michigan Republican National Committeeman Dave Agema made on Facebook in the last week. He said people should "work to bring Michiganders together, not divide" them.
Significantly, Snyder's speech also highlighted his plan to attract "immigrants" to Michigan, a policy so ludicrous it can only have come from believing the Wall Street Journal editorial page:
Snyder also will soon issue an executive order creating the Office for New Americans, joining two other states that have put immigration services under one roof.
His administration has applied to make Michigan the second state government along with Vermont to run a regional center for the EB-5 visa program, with the goal of attracting talented immigrant entrepreneurs. The EB-5 program designates businesses to recruit foreign investors for development projects — the investors get permanent U.S. residency for themselves and their families.
"If someone has the opportunity to come to our country legally, let's hold our arms open and say, 'Come to Michigan, this is the place to be,'" Snyder said.
This enabled Senate Minority Leader Gretchen Whitmer, a Democrat, to make the obvious riposte:
"I think most people in Michigan are scratching their heads a little bit saying, 'Why do we need to import degree holders?' What about ... giving our kids the degrees so they can do the jobs he's claiming to try to lure to Michigan?"
Michigan GOP Governor Unveils Plan To Attract Immigrants To The State, Fox News Latino, January 17, 2014.
To quote our James Kirkpatrick:
[T]he ultimate battle for the soul of the GOP lies ahead. And the battle lines are becoming increasingly clear. One future is as a nationalist, populist, pro-worker Republican Party. On the other is a party of Politically Correct corporate lobbyists, hoping to squeeze out a close victory (or at least more consultant fees) for a few more election cycles.
Snyder doesn't want to "divide" Michiganders. He just wants to immiserate them.
<< Previous
Next >>
LATEST
2022-11-25
Radio Derb: Indigenes On The Warpath, Attempted Zero COVID In China, Our Brazen Ruling Class, And The Great Enstupidation, Etc.
Article
2022-11-25
JOHN DERBYSHIRE: Progressives Find New Pets. Former Pets—Black Americans—Object
Letter
2022-11-25
A Military Reader Reports: The WASHINGTON POST Says Criticizing VMI's New Black Superintendent MUST Be Racist
Post
2022-11-25
Michelle Obama To Sasha And Malia: Don’t Have Kids
Post
2022-11-25
The VDARE.com Year-End Appeal Kicks Off #GivingTuesday November 29th!
Post
2022-11-25
God Help Us All: 79% Of Top Medical Schools Require All Hiring Committees Receive "Unconscious Bias" Training Or Include "Equity Advisors"
|
en
|
Melasma - Dermatologist, San Francisco
Melasma is a common skin problem that causes brown patches on the face. Most commonly found on the cheeks, forehead, chin, and upper lip. Melasma can last for years and potentially may never go away. It is more common in women and is can be triggered by pregnancy (15% to 50% of pregnant women) or birth control pills. Additionally, darker skin individuals and those with a family history are more likely to have melasma.
There are three types and they are determined by the depth of the pigment. Your dermatologist can help distinguish amongst them.
Epidermal: Epidermal Melasma affects the top layer of skin. It tends to be a brown pigmentation with defined borders.
Dermal: Dermal Melasma affects the skin deeper. Unlike epidermal, it can take longer to respond to treatments.
Mixed: Mixed Melasma is when epidermal and dermal are both present.
Melasma can fade over time on its own. his typically happens if pregnancy or birth control were the cause. If it lasts for longer periods of time there are a variety of treatments. These include:
Sunscreen and sun protection. UV and even visible light stimulate the production of extra pigment. Effective sun protection is critical to treating melasma.
Topical lightening agents. There are a variety of medicines and topical creams that will help slow the production of pigment and enhance clearance of the pigment that is already there in excess.
Combination creams: Special, custom blends of ingredients can speed the clearing of pigment.
Retinoids (Retin A and others): Tretinoin helps normalize the production of pigment and enhances the sloughing of extra pigment.
Chemical Peels: Topical regimens combined with a series of chemical peels can greatly enhance the reduction in pigment darkness.
Lasers: Sometimes laser and Intense Pulsed Light can be a valuable adjunct to the treatment of pigment. Lasers do not treat melasma well on their own but can nonetheless be used to enhance the overall cosmetic effect.
Oral medications: There are a few oral supplements/treatments that can be used to treat melasma.
Your dermatologist will be able to recommend the best treatment for your melasma. If you notice any skin irritation, darkening of the skin, or any other problems during treatment, please call your dermatologist.
|
en
|
Bitcoin Casino Blackjack - Casino News
🍀 TAKE EXCLUSIVE BONUS ⏩ https://newcasi.com/crypto/?topbonus500=ExZzDQyjFxU
Top Crypto and Bitcoin Casinos Reviewed and Compared. Bitcoin casinos have become more and more popular in the past few years as it allows many operators to avoid cumbersome regulations required by traditional online casinos. Bc Game Crypto Casino
Bitcoin Casino Reddit 2021
Best Bitcoin Casino Summary! Nowadays casinos have a new solution for the issue of regulation – Bitcoin. nature drove many Bitcoin casinos to pop up since authorities couldn't regulate or enforce them. Is Crypto Casino Legal
Bitcoin Casino Blackjack: https://www.youtube.com/watch?v=ExZzDQyjFxU
Kumsal Gecesine Hoş Geldiniz Bu Günlük De Böyle Olsun #casino #sweetbonanza #rulet #slotASMR RELAXING SPEED VIP BLACKJACK with dealer Emma 🃏❤️ BLACKJACK ASMR CASINO / sounds cards ♦️♠️♥️
|
en
|
“Resellers will actively engage with customers around maintenance renewals directly. The business will be pushed through the channel [but] CA’s Customer Interaction Centre will ring up the end user and remind them,” he says.
|
en
|
This conformed serves as a deal between YOmoney and the MERCHANT for the agreement covering the commercial terms below for a period of 1 year minimum.
USE OF MERCHANT NAME
MERCHANT authorizes YOmoney to include the MERCHANT 's name, and YOmoney Allows the MERCHANT to use (YOmoney) in any directory or promotional materials produced in connection with any form of Promotion and Marketing.
YOmoney shall provide the Scan to Pay Service, and issue, install, and/or deploy the YOmoney Scan to Pay Tools free of charge. In exchange, no fee or expense shall be charged to YOmoney for the space used or occupied by the YOmoney Scan to Pay Tools.
MERCHANT shall use the Scan to Pay Service and Tools only for the intended purposes. The Scan to Pay Service shall at all times be made available to the public. And YOmoney will provide and execute all YOmoney account Creations and Verification thru the mobile App.
LOYALTY/PROMOTIONAL PROGRAM.
The MERCHANT hereby agrees to participate in loyalty/promotional programs which may be developed and implemented by YOmoney, without added advertising cost to the MERCHANT except for the Discount or Rebate given and decided my Merchant for promotional purposes and small transaction Fee. The MERCHANT may however implement its own loyalty/promotional program at its own cost and expense. YOmoney shall not be liable in case of failure of MERCHANT to fulfill MERCHANT'S obligations under its own loyalty/promotional program and hold YOmoney free from any liability and claims from its customers/clients and any third party.
Information of or relating to users gathered through or on the Scan to Pay Service (including, without limitation, any information considered "personal information" or "sensitive personal information" under the Data Privacy Act of 2012) shall be the exclusive property of YOmoney and will be dealt with in accordance with YOmoney's privacy and security policies, as well as the relevant law and regulations. Under no circumstance shall YOmoney volunteer, disclose, or share to MERCHANT any personal information or sensitive personal information pertaining to YOmoney users, and in no event shall YOmoney process such personal information or sensitive personal information on behalf of MERCHANT. MERCHANT shall exert its own efforts in obtaining any necessary personal information or sensitive personal information from customers who are YOmoney users.
YOmoney serves the right to terminate this Agreement without prior notice to the MERCHANT and without giving the reason, in case the MERCHANT, as solely determined by YOmoney, has committed acts prejudicial to the interest of YOmoney or if any of the terms and conditions contained herein is violated, but not limited to, fraud, counterfeit Transactions, encashment, selling or providing services that are not declared or considered to be illegal.
In the event that the MERCHANT shall decide to discontinue its business, YOmoney shall be given at least sixty (60) days prior written notice. In the event of termination, the MERCHANT shall present all completed transactions to YOmoney's representative at the time of termination.
In the event of termination, the MERCHANT shall return to YOmoney all materials including but not limited to and all other related devices and Merchant Payment File and promotional materials and shall remove all decals and signs from the premises immediately.
This Agreement shall remain in force upon signing hereof and terminated by either party for any reason provided notice in writing shall be sent to other party sixty (60) days prior to the effectivity of such termination.
|
en
|
The HipHop Coach: Copyright Ownership - Why It Matters
Copyright Ownership - Why It Matters
Whatever the level of success an artist, producer, or record label has within the music industry, one this is for sure: ownership of rights is a critically important issue. Whoever owns a song or video gets to decide how it's used, and receives the monetary profits from its use. So obviously copyright law is something in which every budding music artist should fully verse themselves. But most of the time, if not all, it's still important to consult an entertainment attorney when these issues arise to make sure one is making the correct decision for one's career. Not doing this could mean the difference between making it big and remaining irrelevant. Below are some recent legal cases that may be of interest for those looking to make a career out of writing, performing, and/or recording music.
Now, let me first put this out there. Prince is my favorite artist of ALL TIME. One of the things that makes him my favorite artist aside from his brilliant artistry is the fact that he's a brilliant businessman and a ruthless enforcer of his rights concerning his copyrighted material. Even if it's only 6 seconds of his copyrighted material, which was the case when Prince invoked his right to issue a Digital Millennium Copyright Act (DMCA) takedown notice to the social media app Vine, ordering them to takedown videos that were being shown in their app where Prince's performance recordings were being used.. More on the story is explained in the following video by Blain Bettinger who is an attorney with Bond Schoeneck & King and author on the Higher Education IP Law Report:
Mr. Bettinger touches on a very interesting point, which is the question of balance between the rights of the holder of the copyrighted material and the right of others to use material in a creative way. He mentions that the DMCA is abused at times, and one might say that Prince is going a bit overboard with asserting his rights in this case. In my opinion, though, he's not. I'm pretty sure that if I were on the same level as Prince in my success, I would stop ANYONE from using my creations in a way that I didn't authorize. Even if that use was only 6 seconds.
Now eventually, if a copyrighted work gets old enough and the copyrights expire or are not purchased by someone else, as song (or film) will end up in the public domain, in which time one is able to use it freely without getting copyright clearances. This is called fair use, but even fair use isn't as simple as one might think. Take for example the recent case involving the song Happy Birthday to You. Would you think, just by taking a guess, that Happy Birthday to You was in the public domain and fell under fair use? Well if you answered "yes", then you'd be incorrect. Happy Birthday to You's copyright is owned by Warner/Chappell Music who happily charge $1,500 for the use of the song on screen. That is, they currently own the copyright. There is a pending lawsuit filed by Good Morning to You Productions Corp. that claims that the copyright assertion that Warner/Chappell Music has made all these years is indeed invalid. Read more on the case here.
I'm excited to hear about the outcome of this case, as it speaks directly to the reason that copyright law exists. If you go and read the factual background on the case, there is a long list of dates where Happy Birthday to You was NOT copyrighted by the original authors, the Hill sisters, nor was it copyrighted by the person to whom they sold their song. All this could have been avoided had the song been properly copyrighted in the first place, and the rights of that copyright transferred accordingly. Those who have paid the $1,500 to get the license to use Happy Birthday to You will likely be watching this lawsuit closely, as well as those who'd like to use it in their works. But for now, Happy Birthday to You remains out of the fair use aspect of public domain. So no recording the Happy Birthday to You song in your amateur documentary film that you might get into Sundance. Until this case is settled, Warner/Chappell will likely still want their money.
So who is it that chases down all the potential copyright infringements that may be happening all over the country? Well, this job lies with the P.R.O., or Performance Rights Organizations. I discuss these different organizations in a previous post. Someone asked me recently if it was legal for cover bands to perform in public places. I had to take pause for a minute, because I had never thought about the legal implications of that situation. My first instinct was to answer that, no, it was indeed probably NOT legal, and these bands were opening themselves up to lawsuits by doing so without proper licenses. Turns out, I was correct in that gut instinct. There was a recent case where a representative of ASCAP, the American Society of Composers, Authors, and Publishers, visited Roscoe's Chicken and Waffles and heard not only a cover band playing copyrighted songs, but also songs being played from a jukebox that were not properly licensed. A full reading of the case can be found here. This lawsuit goes to show that it can be very costly to ignore a P.R.O. It is their sole job to track down and collect money for all performances of copyrighted material, and they take that job seriously. One would be wise to make sure that all appropriate licenses are obtained before opening a club where cover bands will perform or music will be played. If not, you may just end up like East Coast Foods and have to pay out a far greater amount of money in court fines than you would've had you just gotten the proper licenses in the first place. A great paper about this very issue can be found here, called What's Covering the Cover Band?
At any rate, the legal pitfalls that exist within the music industry are as vast as sands on a beach. One would be advised to hire an entertainment attorney to make sure that the legal t's and i's are being crossed and dotted. As evidenced by the previous cases and many more that are out there, to not do so will truly and in all reality be risking the shirt off one's back. I believe the adage is pay now or pay later, but what isn't added to that saying is that the later amount is likely one that will be much, much more. Play it safe. Get a reputable entertainment lawyer and stay out of the litigation lane.
|
en
|
books.google.comhttps://books.google.com/books/about/Caduceus_of_Kappa_Sigma.html?id=_AQTAAAAIAAJ&utm_source=gb-gplus-shareCaduceus of Kappa Sigma
Caduceus of Kappa Sigma, Volume 20
0 Reviewshttps://books.google.com/books/about/Caduceus_of_Kappa_Sigma.html?id=_AQTAAAAIAAJ
Alpha Tau Omega Alpha-Alpha Alpha-Zeta Alumni Chapter annual Association athletic attended banquet baseball team basketball Beta Kappa Beta Theta Pi brothers building Caduceus captain chapter house Chicago club coach committee Conclave Cornell dance debate Delta Theta Denver District editor elected engineering Epsilon faculty football football team fraternity freshman George graduated Harry held honor Idaho Illinois initiated institution James John June junior Kappa Sigma House Kappa Sigs last letter Lookout Mountain manager married meeting Miss November November 25 Ohio Omega Phi Beta Kappa Phi Delta Phi Delta Theta Phi Kappa Psi played pledged present president Purdue recently represented Richmond season senior Sigma Alpha Epsilon Smith society sophomore Stanford Star and Crescent student successful Swarthmore Tenn Texas track team University Varsity Virginia Washington William York Zeta
Page 833 - Friend after friend departs; Who hath not lost a friend? There is no union here of hearts That finds not here an end.
Page 925 - Street. New York. Knickerbocker Building Will supply you with all personal reference and clippings on any subject from all the papers and periodicals published here and abroad. Our large staff of readers can gather for you more valuable material on any current subject than you can get in a lifetime SUBSCRIBE NOW TERMS 100 Clippings
Appears in 38 books from 1892-1981
Page 451 - When that great Kings return to clay, "Or Emperors in their pride, "Grief of a day shall fill a day, "Because its creature died. "But we—we reckon not with those "Whom the mere Fates ordain, "This Power that wrought on us and goes "Back to the Power again.
Appears in 40 books from 1902-2005
Page 911 - So as to prevent disappointment, it must be understood that the reduction on return journey is not guaranteed, but is contingent on an attendance of not less than one hundred persons holding certificates obtained from ticket agents at starting points, showing payment of full
Appears in 44 books from 1900-1994
Page 447 - Whither is fled the visionary gleam? "Where is it now, the glory and the dream?
Appears in 758 books from 19-2006
Page 910 - 1. Tickets at full fare for the going journey may be secured within three days (exclusive of Sunday) prior to and during the first two days of the meeting. The advertised dates of the meeting are from
Appears in 32 books from 1888-1986
Page 910 - will inform you at what station they can be obtained. You can purchase a local ticket thence, and there take up a certificate and through ticket. 4.
Page 358 - It is a very safe protective rule to live to-day as if you were going to marry a pure woman within a month. That rule you will find a safeguard for
Page 120 - yet consented to reveal certain details. As is said in Baird of 1905, "the Fraternity professes to be, in a spiritual sense, the successor of the ancient order." Naturally, only its own members can be made fully aware of the manner in which it makes good this profession.
Appears in 8 books from 1905-1988
Page 687 - which is connected with any college, university or Other institution of learning, and which is used exclusively by such Greekletter fraternity to carry out the purposes of such organizations.
|
en
|
Fighting for Happily-Ever-After: Preparing for Marriage Long Island, Queens, Nassau, Suffolk, NY Wedding Officiant Minister
Fighting for Happily-Ever-After: Preparing for Marriage
A scary truth about the United States today is that more marriages end up in divorce than happily ever after. No one envisions needing to split apart when preparing for their white wedding, but unfortunately, if a marriage isn't handled and prepared for properly, that may be a future possibility. With a new, independent culture, it's difficult for husband and wife to simply merge together after the big day and live until death do them part. It's important to understand some of the important dynamics of marriage and discuss them ahead of time to cut out some of the anxiety and stress from merging later on. A few, difficult heartfelt discussions before you walk down the aisle can make all the difference, especially when you, too, are chasing your "Happily Ever After" with your beloved fiancé.
Make sure to discuss your religion and beliefs long before the wedding bells ring. In the long run, this is going to be so much more important than just figuring out who you will want for a wedding officiant. Some individuals are raised religious or spiritual and choose not to be as an adult, vice versa, and a combination thereof: discuss where and when religion is going to be important to you in your married life, such as holiday traditions or when raising children. Having different views is never a bad thing in a relationship, it's just important to be on the same page to eliminate future "surprises."
Set up your money guidelines and budgeting before the big day. There is a good possibility that, even as a couple, you were both living independently and used to supporting yourselves. Discuss what you're going to do with your current moneys and accounts, as well as your future paychecks and bounces/gifts. Just because you're used to allotting yourself a certain amount doesn't mean he will feel comfortable with the agreement and vice versa. Set yourselves a budget and spending plan; you're going to have new expenses, but also a second income, so all of your goals and allotments will have to be changed or manipulated. Also, be careful with keeping accounts and independence. It may seem like an okay idea now, but it can cause arguments and uncertainty later on (worrying about full disclosure and who's funding what).
As simple as it sounds, one of the single most important topics to go over before saying your "I Do's" is what it means to be married, and what it means to be a husband or wife. Too often couples end up going their separate ways (once it's already too late) because of this miscommunication - their different views on marriage and roles. You may see a marriage as a perfect partnership, with roles, rights, and responsibilities split right down the middle between husband and wife; he may have more traditional views, wanting to be able to support you entirely, allowing you to stay home, raise a family, and take care of the home. Both are full of love and respect, but both are two completely different ideals; you may want to be a stay at home mom, while he excepts there to always be two, full-time incomes coming into the home. Establish POSSIBLE expectations and desires ahead of the game to ensure you're both entering your marriage with 100% support and understanding.
|
en
|
Jim Kubicina Announces Rochester Hills City Council Re-Election Campaign
As a 29-year resident of Rochester Hills, Jim Kubicina is committed to seeing the community he loves continue to grow and thrive. Kubicina hopes to continue his work with Rochester Hills as the City Council Member representing District 2, by seeking re-election this November.
Kubicina started his community service in 1988 as a coach for his children's various sports teams. Over the years, Kubicina has coached more than 30 teams covering all sports for both boys and girls. Kubicina then branched out to work with the Rochester Area Recreation Authority (RARA).
"I was working with RARA when I started thinking about how much more I could give back and work with our community through City Council," said Jim. "I truly love this community and see the hard work that each individual puts in to making it succeed. Our city government is a big part of that and I was privileged elected to serve on the council following Adam Kochenderfer in 2015."
During his time on City Council, Kubicina has had the privilege to expand his work with Rochester Hills nonprofit organizations as well as assisting residents with their needs and concerns.
"Councilman Kubicina loves this city and it is evident in this way he represents his District," said Rochester Hills Mayor, Bryan Barnett. "He listens thoughtfully and then advocates creatively for the best interest of the residents he represents. He is a great councilman and I am thrilled that he is seeking re-election and proud to give him my full support."
Kubicina has served on numerous committees and boards in the Rochester Hills area including:
Advisory Traffic & Safety Board
Riverbend Naming Committee
Strategic Planning & Policy Review
Pine Trace Committee
Trailways Commission
Recently retiring from Delphi Corporation after 40 years as an Industrial engineer, and has held several different management positions in manufacturing, engineering and quality control. Jim wants to give back his time and passion to the community that helped him raise his family.
Kubicina takes great pleasure in working through residents' questions or issues. "Once you know who to talk to at city hall these issues are often quickly resolved."
Kubicina also takes great pride in our public safety in Rochester Hills. Rochester Hills was recently named the safest city in Michigan for the second consecutive year and he pledges to work toward to keeping police and fire services performing at the highest level possible and at the lowest cost per capita to our residents.
Kubicina is committed to the continued growth, success and quality of life in Rochester Hills. For more information on Kubicina, follow him on facebook at fb.me/JimKubicina.
Filed Under: Elections, Rochester Hills, The Community Edge Tagged With: Jim Kubicina, Rochester Hills as the City Council Member
|
en
|
Top 8 Best Laptops for Engineering Students in 2020
BLOG › Computer & Laptop › 8 Best Laptops for Engineering Students in 2021
Portability was introduced with the evolution of the computing devices in the form of laptops. Since then, laptops have become an essential part of the lives of people of every age group. Let it be any business or any personal utility. Laptops are preferred more as compared to computers considering the portability it offers. The introduction of laptops eventually led to improvements in their structures and performances. Touchscreen laptops got common catering to a more portable system for users and providing a more diverse utility in its consumptions. While living in a world compactly induced with computing systems, the educational system comes with similar requirements. Students nowadays cannot cover their educational needs without laptops. This article covers the best laptops for engineering students that would allow students in the engineering field to finalize the device that suits their requirements and budget.
The diversity in price and performance in laptops is vast and quite noticeable. These improvements come with increasing prices. The more advanced specifications a laptop has, the higher prices it presents. Henceforth, this article presents the six best touchscreen laptops available for students.
CPU:8th Gen Intel Core i7|RAM:16GB |Graphics:NVidia GeForce GTX 1060 (6GB GDDR5); Intel UHD Graphics 620 |Storage:256GB – 1TB SSD |Screen:15-inch (3,240 x 2,160)
Microsoft produces a very small number of products in computing devices. However, the Surface Book series is a commendable product line introduced by Microsoft that provides a very top-notch touch screen experience and exceptional touch and pen experience. Suiting wholly for students who seek to use design-based software and applications, Surface Book 2 is a buffed device that comes with a discrete GPU for the handling of intense graphic-induced work.
CPU:Intel Core i7 |RAM:8GB – 16GB |Graphics:Intel UHD Graphics 620|Storage:256GB – 2TB SSD |Screen:UHD (3,840 x 2,160) IPS Glossy Multi-touch
The Lenovo Yoga Series has been a much-known product line in the professional and official services. This laptop, designed primarily for carrying out the role of a mobile workstation is one of the best hybrid laptops that come in the spot of the best touchscreen laptops to date. With a high-quality IPS glossy touchscreen and add-ons of Full HD and 4K, users can have a very exceptional experience using Yoga C930.
CPU:up to 8th-generation Intel Core i7|RAM:up to 64GB |Graphics:NVidia GeForce GTX 1050 Ti with Max-Q design |Storage:up to 1TB SSD |Screen:15.6-inch 4K UHD HDR (3840 x 2160) multi-touch
This system might be very expensive in comparison to the other 2-in-1 units. However, it provides a very detailed specification that synthesizes a very efficient system. ThinkPad X1 Extreme provides 4K experience and comes handy for users who seek to operate professional-level software and applications, making it a very powerful laptop compared to the other listed touchscreen laptops.
CPU:10th Gen Intel Core i5 – i7, AMD Ryzen 5 3580U – 7 3780U |RAM:8GB – 32GB |Graphics:Intel Iris Plus Graphics, AMD Radeon Vega 9 – RX Vega 11|Storage:128GB – 1TB
|Screen:13.5-inch (2256 x 1504) – 15-inch (2496 x 1664) PixelSense Display
Surface Laptop 3 is another exceptional product that provides a better experience in processor and graphic cards that effectively allows users to have an efficient system for running advanced applications and software. This device provides an excellent battery life and is a contender for exceptional portability.
CPU:Qualcomm Snapdragon 850 Processor |RAM:up to 8GB |Graphics:Qualcomm Adreno 630 |Storage:up to 256 GB SSD|Screen:13.3-inch FHD (1920 x 1080) IPS Multi-touch
Students who seek for a laptop with a limited budget and exceptional performance should go for this impeccable model of Lenovo Yoga series. With very prolific specifications and a lightweight structure, this product provides 4G connectivity and battery time of more than 23 hours.
CPU: (10th Gen) Intel Core i3 – 10110U Processor|RAM:4GB |GPU:Intel UHD Graphics 620 |Storage:128GB SSD
If users focus on laptops that are cheap and provide high performance, this model of Acer Aspire outperforms every laptop, in terms of budget and functionality. A beautifully designed laptop with explicit features for delivering impressive battery backup and performance support never disappoints users considering its overall worth in the market.
CPU:Intel Celeron N3150 – N3160|RAM:4GB |Graphics:Intel HD Graphics 400|Storage:32 GB Flash Memory or 32GB SSD |Screen:11.6" HD (1366 x 768) 16:9 IPS
If we talk about attractive Chromebooks, there won't be much that the market can offer. However, Acer Chromebook R11 is among those models that provide a very solid convertible laptop with a vibrant touchscreen and exceptional features. Engineering students who seek to do lightweight work and simple projects should have a try of this model.
CPU:10th-generation Intel Core i5 – i7 |RAM:8GB – 16GB |Graphics:Intel UHD Graphics – Iris Plus Graphics|Storage:256GB – 2TB M.2 PCIe NVMe SSD | Screen:13.4" FHD+ (1920 x 1200) InfinityEdge Non-Touch Anti-Glare 500-Nit – 13.4" UHD+ (3840 x 2400) InfinityEdge Touch Anti-Reflective 500-Nit
Purchase: Dell
If we talk about the best laptop for engineering studentswith the convertible feature, Dell XPS 13 tops the list for its exceptional features and state-of-the-art specs that cover students' needs. It has a considerate battery life along with a user-friendly platform for them to work on.
This article has provided users with the best laptops that could serve the engineering students' requirements, from a mediocre level to the highest professional scales.
|
en
|
Premier Dumpster Rental in Kennett Square, PA: Rent a Roll Off
Premier Dumpster Rental in Kennett Square, PA
Need Premier Dumpster Rental in Kennett Square?
We have the commerical and residential dumpster service you need in Kennett Square, PA.
At Rent a Roll Off, we strive to bring you the best service at the best price available. We have a wide selection of dumpster sizes in stock in Kennett Square, PA, with flexible & timley pickup and delivery. Give us a try today and you will not be disappointed.
Your roll-off dumpster in Kennett Square, PA is only a phone call away. Don't delay!
Dumpsters are available* in Kennett Square, PA.
Premier Dumpster Rental in Valley Forge PA
Premier Dumpster Rental in Duncannon PA
Premier Dumpster Rental in Wilmerding PA
Premier Dumpster Rental in Milan PA
Premier Dumpster Rental in Sheakleyville PA
Premier Dumpster Rental in Topton PA
Premier Dumpster Rental in Pine Forge PA
Premier Dumpster Rental in Pittsburgh PA
Premier Dumpster Rental in Palm PA
How Can a new Dumpster Rental Be a Great Means to Recycling the Trash within an Eco-Friendly Manner in Kennett Square, PA
By means of separating reusable furniture, home equipment and pantry shelves from the house undergoing reconstruction, there's even more of a possibility that they'll be in better condition and then could be donated to your charity thus others gets use from their store, or benefit from the money lifted. Organizations such as Habitat intended for Humanity are charities similar to this and they will have retail outlets exactly where builders or maybe anyone who would like to, can buy excellent building components and fittings inexpensively. A dumpster roll off company assures that your movie star will not be temperamental, and can do the job used on it. Head out hire your current roll off and get a new head start on your next venture.
The task regarding keeping your streets cleanse cannot be quit to the cities alone. People must take a new stand as well as do operator. Construction dumpsters or perhaps the lack of dumpsters quickly became visible. Everything from papers bottles as well as plates in order to old split shirts, a new hat, and even an extremely outdated boot are available on block corners along with common areas. The people who quit these all far too easily extracted items around the town with out so much to be a second believed are still slinging out his or her trash, but we can clean up and keep that clean simply by using a construction dumpster dentistry.
Before going for just about any Premier Dumpster Rental in Kennett Square, PA company please check that regardless of whether keeping dumpsters are permitted in location or not, if it is not allowed compared to go for substitute option of junk bin. You could find companies which often work in certain areas and plenty of which are employed in every talk about and area as well. The charges policy in addition depends upon business to business, some companies charge with weekly base while some prices on each and every dumpster or can they get. You need to choose as per your current requirement avoiding the annoyance of acknowledging on a get together day that you simply cannot work with service for the reason that type of service you selected.
You are able to hire a Dumpster intended for spring as well as fall cleaning up. There are variety of professional throw off rental agencies extending their professional services right from a sluggish start the season to the end of year.
Dumpster rental is important for the business. Almost all cities trash is only acquired once or twice every week. Having 20 trash containers might not be the top idea on earth. Let's face it many reasons exist why you couldn't want to have that lots of trash containers, in front of, close to or at the rear of your business. They're an eye sore for one thing. They will get in the way. Dependant upon what you will be throwing away you will be attracting annoyances. You don't want to be known for your current collection of wayward cats and dogs rather than what kind of company you run.
You'll probably ask exactly what does a dumpster Rental Company got to do with renovation. Well, let me clarify. Renovating an important portion of your home will most likely build up garbage. Along with what about that outdated furniture that you might want to change? As well as some wall paper that needs replacement far too? All of these trashes need some place being put in as the renovation will be on-going, right?
Dumpster Rental - How to Handle it in Kennett Square
Whenever you currently have trash that has to have removing, the first thing you should do is get in touch with your welcoming neighborhood Premier Dumpster Rental in Kennett Square corporation. No matter what assembling your project is, they're able to give you a spot to dump ones junk and they can cart it all apart at once. There's no need to stall ones cleanup so as to not overcome your every week trash pick-up; renting the dumpster lets you make trash out there when you want to! Whatever the task is, the dumpster fine songs the effort and produces a win-win circumstance for everyone involved and provides solutions for the questions of safety and cleanness. A bathroom or even kitchen property remodeling career involves the require to dispose of aged or damaged appliances as well as fixtures such as stoves, tubs, washbasins, and loos. It also incorporates the need to discard materials constructed from wood such as cabinets as well as flooring. Making this debris on the side of the property or constructing can lead to a hazardous hazard and also the use of the dumpster allows you to discard everything in one particular clean mop. There is no need to different trash and place appliances out there for metropolis pickup, to breakdown the cabinets and place them in to bags some each waste day or even to drive the particular mess to the particular dump garden. One Premier Dumpster Rental in Kennett Square will take care of the entire career from start out to finish.
Such as many others moreover, you may might find this job the one which you do not need to do. If you are one of these people then to you could make your lives easier there are some organizations offering Premier Dumpster Rental in Kennett Square as well as garbage bin rental companies.
The biggest advantage of going with a expert Junk Elimination and Dumpster Rental clients are that you get to sit down back relax learning the job are going to be done right as well as professionally! The key lies in not necessarily falling for those fly through night employees that feature low cost prices on the telephone. They may sound good exactly in danger, but the difficulties only start out when you stop the call. They might not make an appearance, they may raise the price after they do come out there. If you have ever transferred, this type of approach will sound familiar to you. That could even worsen, they may stop insured. They are able to damage your own house, or your neighbors' house. They could receive injured as well as sue you. If almost everything goes good at your website, your worries are not over, when they keep. Then there is the issue of disposing of your waste, are they performing it properly, is he adhering to the particular dumping bylaws close to you or is he illegally disposal your waste and rubbish. If the man with his pick-up can't be found YOU COULD BE Placed LIABLE. How do you avoid the snare? Don't buy any kind of smaller than you're heading to need, either. Trash Premier Dumpster Rental in Kennett Square information mill more than happy to provide you with a new dumpster after they come to get your aged one, but it's going to cost you. Not to mention the fact that there is certainly only so small the dumpster's going to go. If you have an excessive amount of trash for any pickup although not enough for any 10 yard dumpster you are still going to wind up paying for full rental on in which second dumpster. Speak to the customer service representative at the trash Premier Dumpster Rental in Kennett Square provider if you aren't guaranteed what size you need. They can help you create the right choice the first time.
Rent a Dumpster As soon as Remodeling Condos in Kennett Square, PA
Using a dumpster saves people a tremendous amount of time. Garbage could be thrown straight into the bin, instead of piled up and brought to the dump. There is no rapid trip to your dump. By eliminating the need to travel there, individuals save time. This time can be used to build an income, rather than stand.
For people who tend to be anticipating undertaking a major building or demolition undertaking, or even a undertaking that encompasses both of these functions, it is quite doable, highly most likely in fact, that a lot of debris are going to be generated.
Getting rid of bathroom fittings and drywall can be a sloppy and tedious project. Any do-it-yourself project could leave an enormous mess that will not have been regarded as. Regular rubbish pickup inside the community will demand the breaking down of the drywall and placing it straight into bags. It is going to require how the bathroom fittings be got rid of off in respect to the township's regulations. This can take time and demand that your aged, stained bath sit over and above your home while it waits pertaining to trash pickup. This is unneeded when you demand a Premier Dumpster Rental in Kennett Square, PA. The size of your dumpster will be based on the size of your project as well as the cost is based on the amount of rubbish disposed of. Any Premier Dumpster Rental in Kennett Square, PA is affordable and provides a quick implies to remove excessive waste within a bathroom renovation.
Precisely what is a dumpster? A major metal box of numerous sizes which you'll throw points into. The majority of project administrators hire a dumpster as well as two initially, then move ahead to the rest of the strategy. Homeowners who wish to renovate both room of the homes (specially the kitchen as an example), or the total house, will need to organize any dumpster of the suitable size for the job as quickly in addition to being inexpensively as they can. It is a must, just like drywall and appliances and floor coverings are. With no something to placed the trash and recycle materials in, after that where will you be going to place it? Dumpster rentals will benefit you in the above reported ways only if you get from the ideal seller who does not give you negligence promise and run the appropriate to fetch your dollars. The vendor will be very quick in their solutions, fast pickup and quick delivery. The perfect Premier Dumpster Rental in Kennett Square, PA service provider are going to be transparent with it's charges to give the buyer prior info on the cost that's to be bared prior to the order is placed.
Renting any dumpster makes it easy to get rid of the vast sums of yard dirt left with a storm. While most professional trash removing companies have got strict principles about backyard debris, Premier Dumpster Rental in Kennett Square, PA organizations do not have these kinds of restrictions and may take whichever large limbs or even shrub trunks your neighborhood demands removed. Having several neighbours chipping with on the expense, it is also less than paying the costs that professional trash removing companies charge to remove increased yard detritus.
Everybody wants to keep their apartment and area clean and neat. Huge amount involving trash is definitely generated home based renovation and construction tasks. These spend cause irritation at your task location. To get rid of the clutter produced at your task location, you've got to find the ideal Premier Dumpster Rental in Kennett Square, PA service company.
|
en
|
Time Warp - Emily Henderson
by Emily Henderson | 2.8.10
This post practically writes itself, doesn't it? The 70's are back, people. These photos are from a 1975 Better Homes and Gardens decorating book. Ok, so peace and love are always in, no? And the music and films from that time can do no wrong in my book. The Who played at the super bowl yesterday, for God's sake. (And in case anyone else thought this, Elton John apparently did not write/sing the song 'Pinball Wizard', fooled me). Oh sure, you say, they've been back for a while, boho chic fashion from the early 2000's, wide-leg pants, princess sleeved shirts, the entire 2005 wardrobe of Mary kate and the other one. Really the 80's and, dare I say, early 90's are what is the hottest right now. BUT, i'm kind of shocked at how modern these rooms look. Sure, they are too 70's, but most of the furniture, individually is kind of rad. I love that metal Parsons table, the wood cube side table and the wallpaper is totally fine if it was in a more tone on tone color palette (grey and white would be my choice). And I love me a collection of plants, although maybe not this one so much. The picture on the right is great too – the pendant lamp, both iconic side chairs and the sofa is not bad, although looks uncomfortable. I could lose that enormous silver ashtray next to the sofa, though. It seems incredibly oversized and unnecessary and smoking, I've heard is quite unhealthy, although perhaps in the 70's it was better for you as most people seemed to have smoked the decade away.
Ok. So, I would never put all of these 70's elements together in the same room at the same time, but it is kind of shocking how a version of these could be in many shelter magazines (Are there any left??).
And p.s. I LOVE these woven chairs above. If you owned these and invited me over for tea (read: a drink) then there is a chance that I would steal them, and probably blame your maid, or your small child. And that's the risk you take by having a maid or making small children. These bad boys are spendy, but I will own one of them one day.
|
en
|
inkybruSTUDIO: Iris Spring
My irises went crazy this Spring! Very little care goes into this marvelous bed of irises. I inherited these lovely flowers from a friend who had become allergic to grass and leaves (almost anything outdoors) due to some medication she was on. She had about 300 irises. I didn't bring that many to my yard, but at least 100. Over the years they have died out, or the hybrid ones have reverted back to white. But the irises in this bed continue to hold their colors. It is such a great array of purples and violets.
The close-up here shows the various placements of the color in centers and the "falls" (the petals hanging down). Two of my favorites: 1) lavendar centers with purple falls; 2) purple/white centers with white falls outlined in purple.
The irises above that have not unfurled are white with lavender outlines in the centers and on the falls. Below is a close-up of one that has purple outlines and has unfurled.
|
en
|
Home / Managing Editorial Assistant
The Managing Editorial Assistant will proofread and do light copyediting, create simple manuscripts, and track schedule updates. They will assist communicating with freelancers, help maintain style guides and process documents. They will also assist in maintaining the accuracy of metadata, provide general clerical support, and attend department meetings
Please submit a resume and cover letter to jobs@chroniclebooks.com and be sure to include "Managing Editorial Assistant" in the subject line. While this is currently a remote position, the expectation is that this San Francisco-based role will eventually move back in-house when it is safe to do so.
|
en
|
Spice Girl Geri Horner trademarks 'Rainbow Woman' for LGBT+ inclusive kids books - PrideWest
Geri Horner has apparently trademarked the name 'Rainbow Woman' for a new children's book series.
The 48-year-old, came to fame as Geri Halliwell or Ginger Spice in the 1990s Spice Girls. However she is now putting her efforts into her writing rather than relaunching her solo music career.
Despite reports the Spice Girls may reform, The Sun newspaper says she is focusing on her new book series.
A source told The Sun that: 'Rainbow Woman will build on the Spice Girls' "girl power" legacy but will also celebrate diversity and LGBTQ people, which she has long been a supporter of.
'Geri is all about love and acceptance so it's important for that to be at the center of everything she does.
'She recently filed legal documents to protect the name Rainbow Woman and has been hard at work on the project.'
Horner apparently has big plans for the new series. Not only has she claimed the trademark for books but also for merchandise, including clothes, a TV series and film.
Bidding war after book success
Of course Horner – who changed her name from Geri Halliwell when she married Christian Horner, from the Formula One Red Bull racing team in 2015 – is best known for her music.
The Spice Girls sold over 85 million records and made their slogan 'Girl Power' world famous. And her solo career saw number one hits including Lift Me Up and Scream If You Wanna Go Faster.
However, she also published an autobiography in 1999, If Only, described her life as a Spice Girl. It topped bestseller lists and sold over a million copies in the UK alone. Just a few years later, her second autobiography, Just for the Record, came out.
Moreover, in 2007 she started her Ugenia Lavender children's books. The lead character is loosely based on Geri's own life and famous people as diverse as Gordon Ramsay, George Michael, Marilyn Monroe and Vincent van Gogh inspired many of the other characters.
The series became a hit, appearing in multiple languages.
As a result, the tabloid press claimed in March that publishers were engaged in a £1million bidding war to sign her up.
Reports now suggest she hopes to release the first book in time for Christmas.
Meanwhile, her solo career may be on hold. However, Spice Girls fans may be in for a treat. Rumors of a reunion in 2021 to celebrate the 25th anniversary of the girl group appear to be growing by the day.
|
en
|
States' Policies on Health Care Exclude Some of the Poorest - Current Events . . . - MedHelp
Groups>Current Events . . .>States' Policies on Health Care Exclude Some of the Poorest
http://www.nytimes.com/2013/05/25/us/states-policies-on-health-care-exclude-poorest.html?pagewanted=2&hp
So another way of looking at this is, if you live in a blue state you get covered, red state not so much?
http://vitals.nbcnews.com/_news/2013/05/24/18470487-california-reveals-prices-for-health-insurance-under-obamacare?lite
"The prices in California, along with those announced in Washington, Vermont and other states, show that premiums under "Obamacare" can be more affordable than had previously been thought. Consumer advocates welcomed the new exchange. "
If California can make it work, any State should be able to.
California as a state is in trouble. What the state debt now, $200,000,000? They have got to reevaluate everything in government there and take a mulligan.
$400 bill. on a GDP of $2.1 trill. giving a debt/GDP of just under 20% about the same as Texas, with almost exactly the same debt per citizen.
Note which #s are increasing and which are decreasing.
Interesting, no doubt. Just gained a client from California. He picked up hook, line and sinker and moved it all here, including his business.
'' "It's a revolutionary improvement to move from a broken market where people are charged by how sick they are, to a competitive market where people pay what they can afford, based on a percentage of their income, on a sliding scale," said Anthony Wright, executive director of advocacy group Health Access. ''
|
en
|
To Get Started an Abstract – Sikhgurdwaraperth
By admin June 10, 2019 cheap essaysline chart
The response is Friday with a variety of zero push-ups. Every student's response will differ and that's the way that it needs to be. A matter with these queries is they are hard. The primary difference between both options is you could take up to a single year to finish a bend class, whereas you have to be completed by the ending of the session for a semester class. Our forward-looking perspective and rich collaborative environment provides a special chance for cutting-edge study that's altering the face of contemporary psychology. Discuss how that specific work leads to the comprehension of this topic which you're working on. These organizational principles take the sort of mathematical models which may be employed to predict biological phenomena. A line graph is a graphical display of information which changes constantly with time. It might also be known as a line chart.
Thursday night, the boy's family didn't recognize he was eliminated until 7:30 the next day.
The very first step in making a line chart is to provide the line chart a title which will offer a synopsis of this information being displayed. In each instance, please be certain you decide on the quantitative biology track during applications. It's crucial to know that all line graphs need to get a title. The name of a line chart gives a general overview of what's being exhibited. The program comprises a calendar year long concept classes that will give students the essential mathematical foundation and will allow them to discover the basic principles underlying the complexity of biological systems. Their applications offer significant expert education in a very creative atmosphere. The graduate application in writing is meant to be completed in just two decades. The faculty provides a diverse collection of interdisciplinary programs that have many majors and minors in advanced places. Students may expect to come up with a conceptual framework of thoughts and strategies that are involved with the manufacturing and review of bilingual writing.
In these courses, they examine the development of a huge variety of ideas and forms of expression that exert a major influence on modern America. They might also be eligible for the MA upon progress, if no previous graduate degrees are awarded in precisely the same field. Therefore, prospective students will want to decide on a foundation PhD program along with which the qBio specialty is going to be built. The university also dedicates a number of its facilities for people that want to dwell in gender-neutral or LGBT housing. It's focused on the information that will be garnered from this comprehensive report from Dr. Kheifets' analysis. You must finish your course before the semester deadline. Courses needed for the major may be exempted in case the student passes the ideal AP examination. These classes do not need advanced mathematical expertise, and must be broadly accessible by students interested in qualitative studies.
All these extra courses will enable students to acquire the essential background to permit them to focus their study on specific issues. Utilizing ournew course catalogue, you can look for courses to fulfill your interest, or to make credit toward a certificate or degree. This course can be repeated as much as ten times for credit so long as the student works on another job. The lab course is among the key unique elements of the programs and replaces the exact simple paper writer laboratory rotation which exist in many different applications.
|
en
|
Safety in Aviation and Space Technologies | springerprofessional.de
Safety in Aviation and Space Technologies | springerprofessional.de Skip to main content
Select Proceedings of the 9th World Congress "Aviation in the XXI Century"
Herausgeber: Dr. Andrii Bieliatynskyi, Dr. Vera Breskich
Print ISBN: 978-3-030-85056-2
Electronic ISBN: 978-3-030-85057-9
Observations of LED Side Lights at the Stage of Visual Piloting
The side lights of the light signal system indicate the side boundaries of the runway and its color marking by distance. To encode sections of the runway, depending on where they are installed, the lights emit white or yellow light. The fire must be in the pilot's field of vision from the moment of recognition until the moment of flight near it, only in this case the aerodrome lights give a clear idea of the location of the aircraft. The development of LED technologies has allowed the Ukrainian Association of Lighting Enterprises of Vatra Corporation to develop a design of LED equipment for aerodrome light signal systems, namely a universal fire that performs the functions of bidirectional fire and roundabout fire. Features of fire design, angles of convergence of side lights, difficulties in observing LED airfield lights affect on the visual contact. If the light signal system fails, the crew will not be able to establish its location or visual contact may be erroneous. To solve the complex problem of visibility of light signals from LED light signal aerodrome side lights, a tool using the MatLab interface is proposed. The tool allows to model a fragment of a light signal picture in the conditions of deficit of time at a stage of visual piloting. The tool simulates the illumination created on the retina of the pilot's eye from aerodrome side lights in the MatLab interface. Lighting simulation will manage risk in order to prevent aviation events.
Yuliia Kvach
Middleware Service for the Integration of Control Systems of the Aviation Engine and Aircraft
The integration of an aircraft engine and an aircraft is such a combination of their structural forms, aerodynamic and propulsive-economic characteristics and control systems (including thrust vector), which provides an improvement in certain flight performance characteristics of the aircraft. A program structural service of multi-mode aircraft aviation engine integration has been considered. It can be effectively applied for ensuring adaptation to changing flight modes by determining the shape of an aircraft and its aviation engine, from one side, for determining the purpose of aircraft, its parameters and aviation engine parameters, as well as flight modes by correct choice of control laws, from another side. The considered technique and service, based on mathematical modeling of the AIRCRAFT-AVIATION ENGINE-FUEL system, in combination with the use of multiparameter optimization methods, is an effective tool for choosing design parameters and forming the technical appearance of an aviation engine.
Application of Fiber-Optic Sensors for the Aircraft Structure Monitoring
There is a transition from periodic forms of aircraft maintenance to the "on condition" forms performing currently can be observed. Aircraft Health Monitoring system is a very important tool in the formation of "on condition" based maintenance schedule for modern commercial aircraft, which allows collecting and analyzing information about aircraft systems condition. One of the most important components of Aircraft Health Monitoring is the Aircraft Structure Condition Monitoring system, which allows detecting and conditions monitoring of various types of internal damages and mechanical stresses arising in the aircraft structure during its operation. The main advantage of the Aircraft Structure Condition Monitoring system is the absence of its influence on the mechanical and strength characteristics of the aircraft structural elements. Implementation of the system is very important due to constantly expanding possibilities of using composite materials in aircraft structure. This article proposes a method for implementing Aircraft Structure Condition Monitoring system by using fiber–optic sensors. A feature of the proposed system is the integration of sensors into the structure of the aircraft. A review and analysis of the applicability of photodetectors for the proposed system is also given.
Ruslan Zakirov, Feruza Giyasova
Iterative-Analytical Model of Nonlinear Deformation and Fracture of Multilayer Composite Panels
This work is devoted to the issues of numerical modeling of the processes of occurrence and propagation of cracks and delamination zones in spatial multilayer systems. To simulate the processes of delamination and destruction of composite structures, an iterative-analytical theory is used. A special eight-node isoparametric multilayer finite element has been developed and numerically implemented. Nonlinear problems are solved on the basis of the developed universal algorithm, which includes an iterative-analytical method of variable approximations. Comparison of the results of numerical solutions of test problems with analytical solutions of the data indicates their good agreement. Numerical modeling of the process of propagation of main cracks and delamination zones of a nine-layer metal-composite plate with a central hole has been performed. The developed methods make it possible to reliably estimate the change in the stress–strain state of multilayer structures depending on the accumulation of damage during their operation and can be used in the development of information support systems for the life cycle of multilayer aircraft panels.
Aleksandr Gondlyakh, Andrey Chemeris, Aleksandr Kolosov, Aleksandr Sokolskiy, Valeriy Scherbina, Sergiy Antonyuk
Vibration Measurement Technologies and Systems
One of the current problems of modern technology is the measurement of vibration parameters. Increased vibration in machines, for example due to bearing wear, can cause a serious damage. Most often and rather quickly the destruction of the object occurs under vibration with conditions of resonance. Stresses caused by vibration contribute to the accumulation of damage in materials, the appearance of cracks and destruction. Therefore, lowering the level is an urgent task and is a prerequisite for the design and manufacture of process equipment. Such problems can be detected early by using vibration measurement techniques. Thus, there is a great need for measuring, evaluating and monitoring vibration in industrial systems—not only for process machines, but increasingly also for industrial machines. A study of oscillatory processes is great interest to all sectors of the economy—metallurgy, power engineering, rocketry, etc. So, the paper reviews the existing methods and means of measuring vibration parameters and identifies ways to further develop this issue.
Volodymyr Kvasnikov, Anzhelika Stakhova
Methods of Statistical Modeling of Atmospheric Turbulence
The paper studies the methods of statistical modeling of Gaussian random processes used in the modeling of atmospheric turbulence. The need to model atmospheric turbulence arises in many applied problems. Atmospheric turbulence is the main factor that determines the aircraft design resource, affects the assessment of aviation resource. Atmospheric turbulence affects the flight trajectory of unmanned aerial vehicles, the assessment of the variance of the deflection of ballistic projectiles during firing. For practical calculations, we use the implementations of the random field obtained as a result of statistical modeling. The study is based on the methods of statistical modeling of stationary Gaussian random processes and fields. When modeling stationary Gaussian processes, the shaping filter method can be used. The paper proposes a modeling method that uses spectral representations of a stationary Gaussian process and field. Using the spectral representation allows you to build models with a given accuracy and reliability. The paper presents new estimates of accuracy and reliability in the space of integrated functions. The obtained estimates depend on the parameters of the spectral decompositions. This allows us to take into account the properties of atmospheric turbulence in the construction of statistical implementations. The use of spectral images of Gaussian random processes and fields allows to obtain simpler statistical modeling algorithms. This is very important when organizing and conducting computational experiments to solve applied problems.
Anatolii Pashko, Tetiana Oleshko
In the paper an integrated cargo delivery systems on logistics principles was proposed. In order to optimize the cargo business of the air carrier as an additional source of income and to enable the cargo transportation development on the network of airlines effective cargo traffic management system should be implemented. The principal scheme of operating activities for a network air carrier in relation to the cargo component was designed. Implementation of cargo traffic management system of the network air carrier was considered on logistics principles. To synchronize and optimize cargo traffic flows during the planned period on the airline network to obtain profit from cargo transportation mathematical modelling of cargo traffic of a network air carrier, including a model of operational management of cargo flows in the real time mode and a nonlinear dynamic traffic flow planning model can be applied.
Viktor Voitsehovskiy, Mariya Grygorak, Sergiy Lytvynenko, Tetiana Gabrielova, Larysa Lytvynenko
Optimization of Parameters for the Printing Process of Adhesive Application in Honeycomb Core Manufacturing
Thickness of the adhesive strip, mass application of the adhesive, graphic accuracy of the adhesive strip location, and strength of the adhesive bond at delamination are among the main parameters of the adhesive joint affecting the honeycomb core characteristics. The most advanced technology which provides obtaining high-quality honeycomb core is considered to be the technology where the adhesive is applied by the intaglio method. One of the ways to improve the adhesive application procedure by this method is the validation and selection of the conditions of printing process. The regression mathematical model is developed in order to establish the optimal relationship between the surface application of the adhesive and parameters of the process of adhesive strip application. The proposed model of the process under study, as a result of evaluation according to a number of criteria, allowed obtaining the minimum applied amount of adhesive with guaranteed uneven tearing strength. Analysis of the resulting model shows that the depth of printing elements has the most significant effect on the mass application of the adhesive. For example, with the decrease in the depth of printing elements, mass application of the adhesive is reduced as well. Speed of printing affects the parameter of adhesive application only in the interaction with the adhesive viscosity. Results of the work allow significantly reducing the procedures of preparation of the considered stages of technological process for the manufacturing of honeycomb cores by means of reduction of the experimental research.
Andrii Kondratiev, Sergiy Melnikov, Tetyana Nabokina, Anton Tsaritsynskyi
Rationalization of the Topology of Steel Combined Truss
The rationalization of topology of steel combined trusses is offered in the work. The search for a rational topology of steel combined trusses based on structural synthesis with the energy criterion of rationality is presented. The rational constructive form of a steel combined truss is offered. According to research, it is established that the most rational is the topology of trusses, in which the gratings have descending slopes and regular placement of racks. A rational angle of inclination of truss racks is obtained, which provides the minimum value of mass of combined trusses. The evaluation of rational parameters of combined steel trusses by the method of mathematical planning of the experiment is carried out. The diagram of maximum normal stresses in the stiffening beam of the combined truss is obtained. The potential of the calculated regulation of the stress–strain state in the stiffening beam, characteristic for such combined trusses, is revealed.
Myron Hohol, Uliana Marushchak, Ivan Peleshko, Dmytro Sydorak
Construction of Analytical Coupling Model in Reinforced Concrete Structures in the Presence of Discrete Cracks
It is presented the analytical method for determination of refined compliance (and secant rigidity Csm) reinforcing communication, crossing crack λsm—significant parameters necessary for simulation of reinforced concrete constructions on the model of discrete cracks, including through the FEM. This method is based on a mathematical model, which is a nonlinear boundary value problem consisting of four equations, two of which are differential of the first order. Solution of the problem was carried out by numerical methods in mathematical calculation programs MathCAD and Wolphram Mathematica. Amongst the main assumptions of the model are bilinear and linear diagrams for description of behavior under the loading of concrete and reinforcement and the elastic–plastic law of adhesion between them applied. There were obtained the dependences of the secant stiffness Csm on the distribution of longitudinal forces Ns(x) and displacements Us(x) in the reinforcement for different varied parameters, such as the areas, classes of concrete and diameters of reinforcement. The results clearly demonstrate the non-linear nature of the work of reinforcing communication that crosses a crack, which corresponds to the actual operation of the communication, but for greater reliability require experimental confirmation.
Ihor Yakovenko, Yevhen Dmytrenko, Valentina Bakulina
Ergodesign Aspects of the Development of Unmanned Aerial Vehicle System
Based on the analysis of the current state and directions of UAVS development, the authors identify and substantiate the main types of ergodesign support for the development of unmanned aerial vehicle systems (UAVS), and consider ergodesign requirements for the main UAVS components. A detailed nomenclature of ergodesign indicators for UAVS assessment is presented; the determination of the optimal compliance level with such indicators underlies and forms the core of UAVS pre-design analysis and ergodesign development.
Andrii Bieliatynskyi, Oleh Kardash, Anatolii Rubtsov, Svirko Volodymyr
Structural-Kinematic Analysis and Synthesis of Measuring Systems Using a Scanning Probe Microscope
The modern stage in the development of nanotechnology is characterized by a fundamentally new approach to the design of high-precision information-measuring systems (MIS) of mechanical quantities. In this regard, the system approach to solving the problems of structural-kinematic analysis and the synthesis of measuring systems based on scanning probe microscopes (SPM) for various purposes and developing the classification of the basic mechanical part of SPM is topical. Based on the analysis of functional problems of scanning probe microscope, an object-oriented structure of the basic measuring system for working in the nanometer range. An algorithm is developed for combining the control contours of a mathematical model, the measured nano-object, and the parametrization of the trajectory of the measuring sensor along with the object. In the article, the problems of the choice of the velocity of the measuring tip moving along a given trajectory with allowance for a limited number of degrees of freedom are solved, as well as the stabilization of the mechanical part of the system with small errors in the positioning of the measuring tip.
Andrii Bieliatynskyi, Mariia Kataieva, Volodymyr Kvasnikov, Dmytro Ornatskyi
Designing High-Rise Residential Building, Given the Progressive Collapsing
The article presents the features of designing a high-rise residential building, taking into account the progressive collapsing. On the basis of numerical modeling of high-rise frame-monolithic residential building stress and strain state by means of the "LIRA CAD" PC, the feasibility of recommendations stipulated in construction standards and constructive measures proposed in literature sources are analyzed. And the effectiveness of high-rise residential buildings protection against progressive destruction is assessed.
Andrii Bieliatynskyi, Valerii Pershakov, Oleksandra Akmaldinova, Victoria Akmaldinova
Tribocorrosive Behavior of Aluminum Alloy AA2024 Under Electrochemical Polarization
The purpose of the work—to study the frictional interaction of tribotechnical pairs: alloy AA2024—co-rundum indenter, interacting in an acidic environment under conditions of cathodic and anodic polarization. The influence of external polarization on the tribocorrosive behavior of AA2024 alloy paired with a ceramic ball in acid rain was studied. The rate of destruction of the oxide film on the surface, material losses and friction coefficient depending on the applied external potential is established. The dual influence of cathodic polarization on the tribocorrosion of AA2024 alloy is established. The destruction of metal is inhibited at the potentials below the potentials of the freshly renewed surface. It is due to the reduction of the corrosion rate. Above this potential, corrosion-mechanical wear intensifies due to alkalization of the near-electrode layer of the electrolyte as a result of hydrogen depolarization. Changes in the coefficient of friction are insignificant. It is shown that the anodic polarization intensifies the formation of secondary structures. As a result, there is an increase in losses of materials and the decrease of friction coefficient. It indicates the lubrication properties of products that are intensively removed from the friction zone.
Myroslav Khoma, Vasyl Vynar, Aleksandr Dykha, Chrystyna Vasyliv
Influence of Misalignment of Poles on Arcing During Current Collection
One of the important systems in the traction power supply of railways is the contact lines, which is responsible for the reliable transmission of electricity to the electric rolling stock (ERS) through the pantograph, regardless of weather conditions and the intensity of train traffic. Increased reliability requirements are imposed on all overhead line devices. The process of transferring electrical energy from the overhead wire to the pantograph takes place in a dynamic mode. Large currents are transmitted and even the slightest separation of the sliding contact causes the formation of an arc. Separation can occur during high-speed movement of the rolling stock when the slope of the contact wire changes. The arc creates a strong electromagnetic disturbance that spreads in the surrounding space. This disturbance interferes with communication channels, facility management systems and telecommunications located in the zone of its influence. Determining the magnitude of the potential of the electric field at the point of contact will determine the degree of the harmful effect of arcing on adjacent objects and develop a technology to reduce the interfering effect. This article examines the influence of the pole tilt on a stable contact and, consequently, on the effective operation of the overhead contact lines, and proposes a method for controlling the misalignment of the poles to exclude its influence on arc formation.
Ildar Bayanov, Timur Badretdinov, Saidaziz Saydivaliev, Elyor Saliyev, Sardor Muminov
Determination of Thermal Conductivity Coefficient in the Turbulent Boundary Layers
The heat transfer process in a developed turbulent boundary layer is addressed. The fluid flow of study is assumed to be incompressible flowing over a flat plate with turbulent mean velocity profile which is based on the eddy viscosity concept. Theoretically, based on a waveguide model of turbulent boundary layer, the expression of thermal conductivity coefficient is formulated. This formula is dependent on the behavior of least damping modes eigenvalues, and eigenfunctions, that are deduced from solution Orr-Sommerfeld equation by spectral Chebyshev collocation Method. Numerical code, based on a Chebyshev spectral collocation method is used to solve the Orr-Sommerfeld eigenvalue problem, at fixed values of the wave number, and Reynolds number. Spectral characteristics of the dispersion relation are contributed to study the three wave resonance of the least damping mode Tollmien-Schlichting. As a result, a system of differential equations for multiple 3-wave resonance is considered to define the coherent structure. The weight factors values are deduced to capture the condition of system solutions. Theory of Birkhoff-Khinchinis applied to obtain the time average of the square modulus amplitudes of the main harmonic, and sub harmonics.
R. S. Selim
Pressure Amplification Coefficient of the "Nozzle-Flap" Transducer
The principle of operation of automatic control system of hydraulic actuator based on hydraulic measuring transducer of angular velocity of a "nozzle-flap" type is considered. The aim of the research was mathematical modelling of the influence of geometrical parameters of the measuring converter on its pressure intensification coefficient in the MathCAD program. The research methodology included a theoretical substantiation of the proposed expressions describing the transducer, as well as an analysis of numerical results obtained by numerical simulation in the MathCAD program. Numerical researches of the known pressure intensification coefficient in the interval of diameter changes of nozzle and constant choke of 0.5…1.5 mm at a pressure in the system of 0.5…2.0 MPa showed the presence of extreme character of pressure intensification coefficient changing depending on a flap stroke from the nozzle end. An adequate linear dependence for the pressure intensification coefficient was observed in the section of the flap stroke up to (0.5 h). The highest value of the coefficient of amplification corresponded to a flap stroke of (1 h). An active growth of the area under the pressure intensification coefficient graph occured up to (1.7 h). It should be kept in mind, that when the flap stroke increases more than 0.25 of nozzle orifice diameter, the annular gap no longer functions as an adjustable hydraulic resistance. Thus, for nozzle and constant choke orifice diameters (0.0011; 0.0010 m) the recommended initial clearance is 0.5 h or, based on the purpose of the measuring transducer, can be increased to a value of 1.7 h/2.
Vitaly Golubovsky, Vladimir Konovalov, Marina Dontsova
Dependence Between the Mechanical Characteristics of the Material and the FDM Sample Made From This Material
The possibilities of FDM printing make it attractive for the transport engineering industry. Due to its specificity, FDM printing technology is becoming in demand for almost all areas of this industry: automotive, aerospace, shipbuilding, and the railway industry. Along with modeling and prototyping, it is of interest to use FDM technology to create products with a given bearing capacity. The specificity of the technology allows to create products of almost any geometry and size with a high accuracy of compliance with the 3D model. However, the description of the physical and mechanical characteristics of these products is currently very difficult. The layering and discreteness of the medium filling the volume of the product do not allow using the tools of continuum mechanics. Hence, it is difficult to analyze the strength and stiffness of such structural elements. To eliminate these difficulties, it is necessary to establish the dependence between the mechanical characteristics of the product and the filament material with which the product is manufactured. For this, the samples were tested for central tension with unloading under a static method of force action. The samples were made using FDM printing. The purpose of the tests was a comparative analysis of the behavior of FDM sample deformation and the filament material from which this sample was made. This analysis made it possible to establish that their behavior at the initial stage of loading is qualitatively the same.
Vera Raspopina, Alexandra Perelygina, Lev Shemetov, Pavel Grigorov
Impact of Self-Vacuuming of Lithoid-Pumice Aggregate on Concrete Properties
Development of modern construction material science follows the way of cardinal increase of durability of erected constructions. The durability of concrete itself can be evaluated in different ways, but in practice it is convenient to use and test its water resistance, as this property is a qualitative indicator of capillary-porous microstructure of the material. Waterproofing is also closely related to other properties that predetermine the durability of concrete, such as frost resistance, corrosion resistance, etc. Increasing the water resistance of concrete is achieved by increasing the density of all components: cement stone and aggregates. Basically, waterproof concrete uses aggregate from dense rocks such as basalt, granite, diabase, etc. The idea of using porous rocks as aggregates for waterproof concrete at first glance may not be appropriate, but a deeper approach to the issue of application shows the obvious advantage of some of the lightweight aggregates compared with dense. The article provides information about the effect of self-vacuuming of litho-aluminous aggregate in hardening concrete. It is shown that the introduction of these aggregates leads to a decrease in the permeability of concrete, and in some cases to an increase in its strength. The test results are given in comparison with concrete on dense aggregates of basalt rubble and river sand.
Selection Criteria of Aggregates for Waterproofed Concrete Production
The selection and use of aggregates for concrete are based on the test results of any characteristics given in the standards. However, as the article shows, not all aggregates meeting the requirements of these standards are equally good for the concrete waterproofing qualities. For more detailed consideration of this issue, both the model aggregates produced in the laboratory by means of screening and repeated mixing in the required proportions and the aggregates taken from different concrete plants were used in the study.
Process Mining Subsystem in Automotive Enterprise Quality Management System
The paper considers the advantages of process mining methods in the study of automotive enterprise production processes. The general processes structure in the automotive enterprises quality management systems and the use of process mining methods in the automotive enterprises are considered. It is proposed to supplement the quality management system of automotive industry enterprises with a processes mining subsystem. This subsystem should include modules: process selection and data preparation, process model creation and analysis, visualization tools, and process mining algorithms library. The interaction of process mining subsystem with enterprise quality management system elements and enterprise information system is shown. The sequence of actions when creating process models in the process mining subsystem and the criteria for process mining algorithms selection are considered. The possibility of using both commercial and free software products for the subsystem implementation is noted. It is concluded that the intelligent analysis of processes within the quality management system leads to a more effective automotive enterprise quality management, helps to improve business processes, increase productivity and competitiveness.
Elena Malysheva, Sergey Bobrovskiy, Sergey Krapivka, Svetlana Pivneva
Flexible Maintenance Systems to Prevention Road Failures of Vehicles
Flexible systems of maintenance of modern vehicles, integrated at the same time into the on-board local network and information systems of service enterprises, adjust the maintenance schedule individually for each vehicle. Flexible maintenance systems replaced the fixed frequency of service books, automated accounting of operating time, operating intensity and displaying an adjustable maintenance schedule. But auto manufactures put in flexible maintenance systems adjusting only the minimum service intervals in accordance with the conditions and intensity of operation. This does not ensure the prevention of road failures or the timeliness of repairs. To counteract road failures and unjustified downtime in repairs, it is proposed to reduce maintenance intervals of larger labor intensity individually for each vehicle in accordance with a relative increase in downtime in repair and maintenance or a decrease in operating time as the vehicle is worn out and aging. As a result, the known correction will be supplemented by a new function of increasing the frequency of maintenance of greater labor intensity as the vehicle's resource is depleted. At the same time, maintenance intervals for vehicle maintenance of larger labor intensity will need to be adjusted to a much greater extent than for maintenance of less labor intensity. The proposed development of flexible vehicle maintenance systems will be a further individualization of the vehicle service, ensuring timely repairs.
Complex for Research of Power and Speed Losses in Tires of the Car, at Their Rolling on Rollers of the Diagnostic Stand
The article presents the calculation of the efficiency of an elastic tire of an automobile wheel. Its influence on the errors associated with the development of mathematical models of the car acceleration process in both road and bench conditions is revealed. A detailed description of the design and device of the stand for the study of power losses and speed losses in the tires of the car when they roll along the rollers of the diagnostic stand is given, as well as the principle of its operation. Conducting experimental studies on this stand allows us to obtain characteristics that describe the dependence of power and speed losses on the speed of rotation and the supplied torque to the wheels of passenger cars with elastic tires of various sizes and brands. The dependences obtained as a result of experimental studies on the equipment described in the article are planned to be used in the future in the development and debugging of mathematical models for describing the processes of functioning of cars on stands with running drums while controlling their traction and dynamic qualities.
Oleg Yankov, Anton Chernyshkov, Roman Sergushko
Influence of Microfiber on Fire Resistance of Reinforced Concrete Tunnel Tubings
The fire resistance of reinforced concrete tunnel linings of underground structures depends to a large extent on the explosive destruction of concrete under the influence of high fire temperatures on the surface of the tunnel lining. The use of reinforced-concrete tunnel liners made of fiber concrete with polypropylene fibers for the tunnel enclosing structures will allow to reduce considerably the cost of fire protection device and shorten the construction period. Reinforced concrete tunnel tubes made of heavy concrete with 6% moisture content and 1 kg/m3 of polypropylene fiber added have been tested. Large-scale fire tests on a specially made stand were conducted at loading of samples with vertical 490.5 kN and horizontal 294.3 kN loads. As a result of experimental studies, it was found, that the fire resistance limit of the structure was REI 120.
Vladimir Golovanov, Andrey Pehotikov, Marina Gravit, Nikolay Novikov, Vladimir Pavlov
Compensating Microaccelerations from a Temperature Shock
The problem of large elastic elements temperature shock is a serious problem of providing favorable conditions for the implementation of gravity-sensitive processes on board a small technological spacecraft. When a small spacecraft dives into and exits the Earth's shadow, its large elastic elements, primarily solar panels, experience a significant change in the temperature regime. The purpose is to analyze the possibility of implementing algorithms for controlling an electrothermal micro-engine, developed to eliminate the influence of temperature shock on the level of micro-acceleration of the internal environment of a small technological spacecraft. The research is carried out using methods of mathematical modeling, spacecraft parameters analysis, technical justification and analysis of advantages, operating conditions analysis, test results analysis, experimental dependencies construction. The study confirms that it is necessary to take into account the real law of changes in the electrothermal micro-engine thrust for a correct assessment of the decrease in the micro-accelerations magnitude from a temperature shock. Since the temperature shock is an extremely dynamic phenomenon, a detailed study of a turned on executive body thrust change law is necessary. The results of the work can be used in the design of a small technological spacecraft to meet the micro-accelerations requirements.
Andry Sedelnikov, Vadim Salmin, Yuri Lazarev, Denis Orlov, Anastasia Taneeva
Influence of Transport Process Participants on the Quality of Transport Services
This article examines one of the main issues, the organization, and management of integrated transport service in the field of freight traffic, as a key area for improving competitiveness in the transport services market and increasing the efficiency of production activities of all participants in the transportation process. An analysis of the responsibilities and areas of impact of participants of transport—supporting functions in the current model of the freight traffic market in railway transport is presented, the ability of influence and quality observance by the subjects of transport services, in the new Target model of integrated transport services are investigated. The basic criteria of consumers of a comprehensive transport service are formulated. The method is proposed for determining the degree of influence on the integrity of the quality of integrated transport service in different categories of transportation and various types of transport. The calculation of the coefficients of the quality of the transport service and the complex transport service was carried out, the use of which establishes the share of the contribution of each participant of the transport service in the implementation of the goods movement.
Valerii Zubkov, Nina Sirina
Labor Conditions and Surface Quality of the Rolled for the Automotive Metal Products
Automotive fasteners, manufactured by cold upsetting from calibrated rolled metal, are among the most critical parts in mechanical engineering. The rolled products for cold forming are subject to fairly high requirements in terms of strength and plastic properties, upsetting tests, as well as special functional characteristics. These properties depend on the structure and mechanical characteristics that are formed during phase, structural transformations and drawing through the die. For a number of metalware products, for example, bolts of the car engine assembly, there are increased requirements for the presence of surface defects—the depth of surface defects, the presence of a decarbonized layer and the finish of the surface layer. The paper analyzes the defects of metallurgical blanks for the production of hot-rolled products and compliance with the requirements of regulatory and technical documentation in order to improve the quality of metalware, reduce metal consumption and increase the profitability of production.
Dmitriy Kozinov, Аlexei Filippov, German Pachurin, Mariia Mukhina, Zhanna Smirnova
Mathematical Models for Assessment the Thermal Radiation of a Fireball During Bleve
Intensive heating of oil and its products storage facilities can cause the BLEVE effect, with fireball formation. So that it is a fundamental problem to study the thermal effect of a fireball as accurately as possible and assess its consequences. This paper deals with the theoretical generalization and comparative analysis of three mathematical models for assessing fireball thermal radiation at BLEVE. The first model (MM1), proposed by M. W. Roberts, takes into account the time-dependent nature of the fireball thermal radiation. The second model (MM2) was given in the Appendix D of the project GOST 12.3.047-2012 of the National Standard of the Russian Federation. The third model (MM3) was given by Dhurandher, Kumar and Dhiman of the Indian Institute of Technology Roorkee. We will compare these three models by obtaining the following results: assumes that the bulk of the heat is emitted near the accident source. At the same time, at a long distance, thermal radiation intensity remains at a level similar to the levels MM2 and MM3. MM2 and MM3 do not have a fundamental difference in modeling of fireball parameters and calculating the thermal radiation intensity.
Alexey Elizaryev, Elina Nasyrova, Carlo Cattani, Denis Tarakanov, Dmitrii Tarakanov, Ilmir Khasanov
Road Accident Risk Modeling Based on the Machine Learning
Road traffic accident is the serious socio-economic problem all over the world. The main solution is the road safety decision support system, which is based on road accident risk mathematical modeling. The study analyses the road accident risk due to the constant characteristics of the road, using the machine learning. The study was carried out on the road outside the human settlements A-322. It was analyzed 273 km outside large settlements. The research process included three stages. At the first stage, the correlation analysis was carried out. As the result, 12 main constant road characteristics for further research were identified. At the next stage, cluster analysis was realized using the k-means clustering algorithm. It allowed dividing road sections into 3 clusters and determining their accident rate. Analysis of variance confirmed the significance of the cluster difference. Discriminant analysis was implemented on the final stage. As the result, the classification functions were obtained. Therefore, it is possible to determine the accident risk rate depending on the values of constant road characteristics. The resulting model can be used in the development of road safety decision support system for the roads of the 2nd category or similar roads, as well as the roads design. In addition, the research results can be the basis in the development of traffic safety components for Intelligent Transportation Systems or software products.
Elena Pechatnova, Vasiliy Kuznetsov, Sergei Pavlov
Technical Diagnostics of Equipment Using Data Mining Technologies
The paper considers the problem of implementing a practical approach to predictive maintenance (maintenance based on the actual technical condition). With this type of service, the state of the system is analyzed continuously or periodically. Based on the data obtained, a forecast of the technical condition of the equipment for a certain period of time is carried out, programs and maintenance plans are formed and, if necessary, adjusted. The aim of the work is to develop a generalized approach to building a predictive service system based on data of some complex technical object, collected by the SCADA system, with their further processing using computer modeling and machine learning methods. Implementation of this approach minimizes the likelihood of an unplanned system shutdown.
Evgeniya Tsarkova, Alexander Belyaev, Yaroslav Lagutin, Elena Andreeva, Yuri Matveev
Methodology for Assessing the Effectiveness of Work in the Road Sector
Current and forecast economic conditions imply the use of new theoretical provisions in the field of organization of personnel policy and personnel management system. This trend can be traced not only in large manufacturing enterprises, but also in the road sector. In this regard, personnel management should be based on methods that are objectively inherent in effective production management. Evaluation of the effectiveness of work in the road sector is necessary to compare the tasks assigned to the personnel and the results of their practical implementation. The article proposes a method for constructing a system for assessing the effectiveness of the work carried out by road branches. The most important component of the system for assessing the effectiveness of the work performed is the assessment rules that are uniform for all performers. The set of procedures for determining and assessing compliance indicators of the estimated volume of work performed must objectively reflect the results obtained, which determine the effectiveness of the road branch. The proposed method for assessing the performance of road branches allows management personnel to build an objective system of reward for the fulfilled value of the established standard for the range of works.
Maria Mironova, Ulia Mironova, Tatiana Konovalova, Sofia Nadiryan, Artem Litvinov
Chamber Air Flow Control Before the Radiator
The passage of cooling air through the engine compartment is accompanied by a significant increase in aerodynamic drag of the car. On the other hand, forming of air flow due to the operation of the fan is associated with additional energy costs. To reduce fuel consumption and emission of harmful substances, it is necessary to reduce the power consumption for supplying cooling air. At the same time, the possibility of rational use of the oncoming air flow and fan power should be taken into account. The easiest way to solve the problem is a fan installation with the case, which area is less than the front area of the radiator. The main disadvantage of this design is the air circulation from the engine compartment of the engine. In this work there is a conducted research on reducing air circulation. The simplest method has been studied, a partition has been installed in the pre-radiator chamber separating the free zone of the radiator and the zone of the fan case. A good effect has been recorded, but only if the resistance of the engine compartment is less than the resistance of the radiator.
Research of Influence of Air Intake Openings and Pre-radiator Chamber Design on Airflow Distribution
A large amount of cooling air is required to keep the cooling system of a passenger car engine running. The air intake openings and the pre-radiator chamber play a very important role in forming the flow of cooling air through the heat exchangers. In order to design these elements purposefully, it is necessary to know the mechanism of interaction of the air intake openings with the oncoming flow and the parameters affecting the organization of the required air flow through the air channel of the engine compartment of the cooling system. For this, design options are considered with a symmetrical and asymmetric position of the air intakes and pre-radiator chamber with different depths.
Metal Removal and Surface Roughness Formation in Robotic Finishing
This article deals with the mechanisms of metal removal and surface roughness formation during robotic finishing. To analyze the process mechanism, a single abrasive body with a single abrasive grain protruding during its interaction with the machined surface was considered. The destruction of a solid body surface by a single abrasive grain depends on the impact nature of the latter on the machined surface, i.e., on the resulting pattern of destructive stresses. Embodiment zones of various mechanisms of metal removal are considered. In experimental research influence of such factors as the spindle speed (n), the feed rate (S), the cutting depth (t) and the abrasive grit size (z) on the axial components of the cutting force and the torque along the X axis was estimated in a full-factor experiment. As a result, when the spindle speed increases, elastic movements and oscillations arise in the technological system, which conditionally increase the different height arrangement of abrasive grains on the working surface of the tool and lead to an increase in the roughness of the machined surface.
Aleksei Aleksandrov, Michail Vartanov, Dmitry Mironov
Designing a Single-Way Metal Crossing for Railway Transport
One of the most characteristic aspects of our time is the continuous development of a network of permanent communication routes. Transport links provide for the needs of industry, agriculture and trade, contribute to the international division of labor and rapprochement between countries and peoples. In this regard, it is necessary to build a large number of the road, railway, as well as the city bridges. Along with reinforced concrete bridges, which have recently become especially widespread, metal bridges are being built, which make it possible to block large spans most quickly and effectively. The development of metallurgy, the continuous improvement of the quality of construction steels and the improvement of methods for the manufacture of metal structures provide all the conditions for the successful and economically justified use of metal in the construction of bridges. Metal bridges have great production advantages due to their industrial manufacture, as well as the wide possibilities of quick mechanized assembly and installation of the structure in place. The need to save metal and reduce labor intensity in the manufacture and installation of span structures are closely related to the creation of advanced structures that meet all the requirements of operation, as well as today's technology for mass production at the bridge structure factories. The paper presents the design results of a single-track railway bridge, analyzes the location of the designed bridge. Three versions of the bridge crossing over the river were considered, the main structural elements of the bridge crossing were developed. The authors designed the main structural solutions of joints and abutments of elements.
Alexey Loktev, Vadim Korolev, Irina Shishkina, Jalil Shukurov, Vladimir Tkachenko, Alexander Mikhalʹchenkov
Parameters Ensuring Smooth Passage of the Rolling Stock Along Turnouts of Railway Transport
The paper considers the formation of approaches to standardizing parameters that ensure a given level of impact on passengers and cargo when passing rolling stock through turnout switches, considers the dynamics of interaction between rolling stock and switches in the horizontal plane. There is now a need to accelerate the design and implementation of turnouts on the operated railway network, which will significantly increase the permissible train speeds, especially on the side track. One of the most important tasks in designing such turnouts is to provide comfortable conditions for passengers when the train moves to the side track by limiting the values of the so-called centrifugal acceleration and increment (changing) of centrifugal acceleration per unit of time (second). If it is necessary to realize the speed of movement on the side track above 50 km/h, the main factor in determining the radius of the switch curve according to comfort conditions is to limit the magnitude of the increment (change) of centrifugal acceleration per unit time (second). Based on this, when designing switches for high speeds, it is advisable to use curves of variable radius of rolling stock action and switches in the horizontal plane as a switch curve.
Boris Glusberg, Alexey Loktev, Vadim Korolev, Irina Shishkina
Technology for Recovery of Defective Rail Bars
The continuous welded rail track is the main design of the track used by the railways and can be operated in accordance with the technical requirements established by the railways on the tracks of all classes. The paper presents the calculation of the possibility of laying a continuous welded rail track. Analysis of works on temporary and final restoration of welded rail strings is carried out. At the final restoring, rail strings can be welded by electric contact or aluminum thermite welding. Depending on the location of cropped rail or the place of temporary restoration relative to the ends of the restored rail string, the final restoration by electric contact welding can be carried out with tightening of the welded rail string or with its preliminary bending. Final restoration of rail strings by aluminum-thermite welding can be carried out immediately after identification of a dangerous defect requiring cutting or after temporary restoration of the string. Laying of continuous welded track with or without replacement of the assembled rails and sleepers should be carried out in accordance with the projects and technologies approved by the railways. When planning work, it is necessary to take into account daily and long-term forecasts of the rail temperature. During the work, continuous monitoring of the rail temperature, carried out with the help of portable rail thermometers, should be organized.
Alexander Savin, Alexey Loktev, Vadim Korolev, Irina Shishkina
Multi-rotor (24-Rotor) Tiltrotor Discplane, as Version of a Circular Wing (Flying Saucer)
The object of this study is a multi-engine multi-rotor tiltrotor discplane (multi-rotor (24-rotor) tiltrotor of disc-shaped form), as version of a circular wing (flying saucer) with a decentralized system of separate parallel control of its engines. The construction of this aircraft provides the possibility of a smoother vertical takeoff and landing directly from sidewalks, roads and conventional car parking lots, and does not require special helicopter pads. The multi-rotor scheme gives the possibility of absolutely stable hovering and jewelery precise maneuvering on small heights, provides a change in the inclination of the aircraft (circular wings) during its transition from the phase of vertical flight to the phase of horizontal flight and vice versa without the need for extremely dangerous turns of engines of the vertical traction, such a transition occurs only by changing the speed of part of engines of vertical traction. The technology of completely closed and hidden under the case and protective lattices of air screws allows to use this discplane safely in the conditions of densely populated city quarters. The disc-shaped form of the aircraft allows you to fly at higher speeds in the dense layers of the atmosphere (due to the thinning of air above (in front of) the aircraft) and reduces energy consumption during flight by using the Coanda-effect—creating increased pressure (airbag) behind and under the discplane, and a simultaneous reduction in air pressure and aerodynamic drag at the front and top of the discplane.
Alexander Nakhaba
Obtaining Body Parts with Variable Wall Thickness Along the Perimeter
The article considers the production of housing parts with variable wall thickness along the perimeter. The use of this type of products is possible for various areas of industrial development, as the most important branch of the national economy. Examples of the use of cylindrical body parts of variable thickness in the electrical industry are given. The technological process of manufacturing body parts with variable wall thickness along the perimeter of sheet blanks consists of the operation of drawing without thinning and the operation of drawing with thinning and end support, as well as direct extrusion. The simulation of the described operations is carried out, the process diagrams and the semi-finished product obtained as a result of forming a round sheet billet are shown. The power modes of the first and second operations of the technological process of manufacturing body parts with variable wall thickness along the perimeter from sheet blanks are studied. Recommendations are given for the manufacture of body parts with and without a flange. The technological process of manufacturing body parts with variable wall thickness along the perimeter from sheet blanks presented in the article ensures high quality of products while saving material and energy resources, and also leads to a reduction in labor costs.
Yuliya Bessmertnaya, Alexander Malyshev, Vladimir Vikhorev, Pavel Romanov
A Model of Electronic Document Management of Technical Documentation for Railway Automation
The article discusses the features of electronic document management of technical documentation of railway automation and telemechanics. The article deals with the problems of synthesizing the mathematical description of the electronic document management of technical documentation for railway automation and telemechanics. For this, an overview of the actual processes of making, checking and applying technical documentation was carried out on the example of maintaining custom specifications for automation and telemechanics systems, which made it possible to identify document flow scenarios, as well as protocols of technical documentation properties. A method for creating a model of electronic document management of technical documentation based on the apparatus of graph theory has been advanced. Methods for determining sets for the proposed model are described, an algebra of workflow of TD using graphs is proposed. To set the matrix type of document flow representation, it is proposed to use a set of flat rectangular matrices, each of which represents the state of the system in some discrete unit of time. The resulting matrices of incidents determine the graph model of the document flow of the process under consideration, and the set of these matrices sets all possible scenarios for the movement of documents in the process, describes all possible states of documents and determines possible participants. The use of the proposed method for constructing a mathematical model based on graph theory makes it possible to develop reliable applied software for solving problems of operational document flow of technical documentation.
Dilshod Baratov, Nazirjon Aripov, Obidjon Muhiddinov, Xasan Jumanov
Parametric Analysis of the Boundary Layer of the Air Flow of the Ventilation Duct of the Brake Disc
The air flow is used to cool the brake discs. Manufacturers of friction units equip a metal friction element of the unit with a ventilation device, assuming that it will intensively remove heat from heated surfaces. Macroparameters characterizing the efficiency of the brake disc ventilation apparatus are widely given in the studies of scientists from different countries. The speed and volume of air masses directly affect the amount of heat removed from heated surfaces. Surface parameters also affect the heat transfer process. Unfortunately, there are so few works devoted to the processes in the boundary layer of the air flow that directly affect the heat transfer from the surfaces of the ventilation apparatus. In a wide range of literary sources, the boundary layer has a heat-insulating effect, with an indistinctly expressed condition of movement and energy transfer.
Artem Litvinov, Ivan Yaitskov, Pavel Polyakov, Alexey Golikov, Evgeny Fedotov, Nina Zadayanchuk
Vector Analysis of Strategic Sustainability Airport Operators and Airlines
This article describes approaches to assessing strategic sustainability. The results of interaction between airport operators and airlines are important for understanding strategic sustainability of market players (operators) in the air transport sector. Strategic sustainability of airport operators and airlines is greatly influenced by the specific nature and focus of strategic interaction. Strategic sustainability can be presented as a vector of market players' development using a number of parameters, which reflect sustainability, and reliability of a long-term functioning of the mentioned market players in the particular sphere of their interaction. The article describes the spheres of strategic interaction, focus objects in the spheres chosen, system of indicators reflecting the results of strategic interaction between airport operators and airlines. The article offers to use a method, which makes it possible to create a vector description of strategic sustainability and interaction potential. Using a case study, the article describes the factors and the process of analyzing strategic sustainability of market players in the air transport sector. It also presents a vector description of strategic sustainability and the interaction potential be-tween an airport operator and an airline.
Aigul Pankratova, Svetlana Borodulina, Alexandr Gubenko
Fault Detection Technique for Electromechanical Actuator of the Aircraft Using Neural Networks
The paper concerns the problem of development of the technique for rapid fault detection for electromechanical actuator (EMA) of the aircraft related to dissipative torque change. Increased dissipative torque is a common cause of EMA failure. To address this problem, a data processing scheme has been suggested for EMA's operation using neural networks. The work describes the feature filtering methods used for reduction of neural network input vector dimension. Trained neural networks are designed to develop algorithms for determining the EMA's technical state. The algorithms are proposed to be used for flight safety in the health usage monitoring systems (HUMS) of the aircraft. The paper shows the computing experiment results based on the data obtained by using computational model of unmanned aircraft's EMA while processing the take-off cyclogram. The data includes test and training sets for neural network. The computing experiment results shows efficiency of fault detection related to dissipative torque change.
Georgy Veresnikov, Valentin Lebedev, Oleg Ogorodnikov, Artem Golev
Subminiature Eddy Current Transducer for Inspection of Welded Joints Obtained by Friction Stir Welding
This paper presents a measuring system focused on the study of welded joints obtained by friction stir welding (FSW). The system is based on an eddy current transducer. The study shows key technical information that describes the principles of operation of an eddy-current transducer, as well as a method for searching for violations of the internal structure of welded joints of aluminum plates. The proposed measuring system incorporates the functionality to automatically change the main operating frequency and cutoff frequency of the filtration system. Testing of the apparatus was carried out on aluminum-magnesium alloy plates assembled together by friction stir welding. The results obtained in the course of a series of experiments allow drawing conclusions regarding the qualitative characteristics of the obtained welded joints.
Alexey Ishkov, Vladimir Malikov
Application of Machine Learning Algorithms in Ensuring Information Security of the Internet of Things in Water Transport
IoT technologies are gaining increasing influence in all areas of human activity from wearable devices to industrial applications. With the rapid development of water transport infrastructure, as well as with the growth of commissioned port and berthing mechanisms, serious prerequisites have arisen for the use of control and monitoring tools. IoT systems allow you to flexibly and efficiently solve such problems. The IoT architecture includes various levels of communication and information transfer. There are many protocols and applications running at each layer, which can be vulnerable to attacks of intruders. Nowadays, research related to solving IoT security issues using various technologies and concepts, such as blockchain, statistical analysis, machine learning, etc., is actively underway. This paper provides an overview of machine learning methods used at various layers of the Internet of Things architecture. In addition to the layers of the IoT architecture, it also discusses the machine learning methods used to counter the increasingly widespread attacks of social engineering that lead to the loss of integrity, confidentiality and availability of information. At the end of the paper, the machine learning methods that best match the architectural and hardware capabilities of the IoT were selected.
Izolda Li, Artem Arbuzov, Vladimir Shilkin, Irina Shilkina, Nadezhda Baryshnikova
Enroute Alternate Planning Minima Determination Method Based on METAR Database Analysis
The random processes analysis of meteorological conditions changes is carried out: the ceiling and visibility range at the enroute alternates Nizhnevartovsk and Bratsk, selected when planning Russian airlines Far Eastern flights. The random processes analysis is based on the meteorological aerodrome half-hour observations database in 2017 and 2018 for the direct and return flights periods to the Russian Far East. Based on the analysis, the ceiling and visibility regression forecast on direct and return flights, necessary to determine the enroute alternate planning minima, is made. The existing methods shortcomings for the enroute alternate planning minima determining used in the Russian Federation, the United States, the European Union and other countries are indicated. A new enroute alternate planning minima determination method based on a meteorological condition changes regression forecast is proposed. The new method also can be used for North Atlantic, Pacific and other long-range routes and helps the airlines increase their flights regularity by increasing the amount of enroute alternate available days in year. The ceiling and visibility increments calculated using the new method must be used regardless of the enroute alternate area of operation radius.
Konstantin Kuts, Gennadii Kovalenko
Development of a Car Door Hinge with a Temperature-Sensitive Element
The article shows the study of the influence of the anthropometric characteristics of drivers and passengers on the time of evacuation from the passenger compartment of the vehicle, through the window opening of the vehicle door in an accident with fire in the event of a jammed door lock. It was determined that a large category of drivers and passengers could not be evacuated through the vehicle window opening and was determined as the most optimal way of evacuation directly from the doorway. Based on the data obtained, a new design of the car door hinge was proposed using materials with shape memory effect, which makes it possible to break the connection between the door and the body. The principles of operation of the proposed design of car door hinges are shown.
Maria Mironova, Ivan Senin, Etibar Balaev, Tatiana Konovalova, Artem Litvinov
Mathematical Model of Multi-item Spare Parts Reservation
A mathematical model for determining the optimal number of reserved spare parts in the warehouse of an enterprise operating transport and technological machines is proved and tested. The solution of this problem is important in improving the efficiency of technical operation of machines and equipment used in any enterprise. The market conditions of management require a higher level of spare parts demand planning, a new level of spare parts supply system management. The purpose and tasks of economically justified spare parts reserves are to maintain the rolling stock in working condition in the absence or minimal downtime of machines waiting for repair due to the lack of spare parts. To do this, it is necessary to have the optimal number of required spare parts in the warehouse of the company that operates or repairs the machines. The paper is devoted to the rationale for making optimal economically sound management decisions to provide spare parts for any equipment by creating and implementing the procedure and methodology for reserving spare parts in the form of a mathematical model that takes into account a sufficient number of factors and relationships between controlled and uncontrolled variables. An example of calculating the optimal number of spare parts to reserve, de-pending on the distance to the source of spare parts, is given. The results of the calculations confirm the adequacy of the proposed mathematical model to the real production conditions.
Veniamin Shilovsky, Igor Skobtsov, Evgeniy Pitukhin
Analysis of Methods and Design Elements of Docking and Un-docking in Orbit
At the current level of spacecraft development, orbital docking is increasingly used. The requirements for docking devices, as well as their complexity, are increasing. The purpose of the article is to analyze the methods and design elements of docking and undocking in orbit. Based on the results of the review, a conclusion was made about the structural elements necessary for the docking and undocking of the demonstrator modules of the universal space platform.
Daria Malyh, Ruslan Peshkov, Sergey Vaulin, Victor Fedorov, Mikhail Shalashov
On the Issue of Estimating Errors in the Operation of the Interactive System for Improving Road Safety Outside Settlements
The article presents the result of the analysis of statistical data of accidents in the Krasnoyarsk Territory on sections of roads outside settlements with their greatest concentration. The main types of vehicle collisions and their accompanying conditions were identified. A mathematical apparatus for determining the minimum safe distance between vehicles located closely in an emergency zone on a section of a road outside settlements is proposed, in which it is necessary to notify the drivers of these vehicles about the danger in conditions of insufficient and/or limited visibility in various road situations, taking into account errors in positioning and determining the speed of the vehicle, the response time of the system, the effective coefficient of adhesion of the tires to the road surface. The results of experimental studies of vehicle positioning and speed errors determined by the driver's early warning system about hazards on the road and their impact on the operability of the designed system are presented.
|
en
|
Social Media Marketing & Social Networking Agency | First Source Interactive
Use Social Media Marketing to engage your audience, enhance your brand, control the conversation.
Social media refers to the manner in which people create, share and exchange information in the digital world. People engage on Social Media in forums like Facebook, Linkedin, Twitter, Tumblr as well as a growing universe of alternate options.
While everyone wants to be on Social Media, many institutions enter the space without focus or a defined set of goals. To deliver quantifiable results, Social Media campaigns need to seamlessly stitch together a quilt of different mediums. When implemented effectively Social Media can be a powerful tool to drive brand awareness, enhance brand equity and drive new business while also augmenting any ongoing SEO and Paid Search campaigns.
Businesses, non-profit organizations and politicians alike have turned to Social Media as their go-to method for audience outreach. However, it's not a silver bullet, and expecting results from an improperly managed social media campaign is like firing an unloaded gun. FSI Social Media campaigns are focused on delivering real, measurable results outlined in an achievable blue print.
Social Media programs should not be limited to mere cheerleading; rather they should be an effective exercise of brand elevation and business development. FSI's approach to Social Media Marketing is more akin to a battle plan – expertly conceived with strategy and tactics in mind.
No, we haven't taken all the fun out of Social Media! Our campaigns can be whimsical and lighthearted as well as idea focused, and educational. Regardless of the theme and the way it's presented, we remain true to our ultimate purpose: to drive new business, engage current customers and uniquely build your brand equity.
Social Media Marketing Deliverables Include
Promote new products & services. Ones people may not be searching for and are not aware that you provide.
|
en
|
Samuel L. Jackson Responds To Martin Scorsese's Comments About Marvel | Bossip
Hi Hater: Samuel L. Jackson Responds To Martin Scorsese's Comments About Marvel Movies Not Being Cinema
Samuel L. Jackson Gives His Two Cents On Martin Scorsese's Marvel Comments
Martin Scorsese's comments about Marvel films rubbed a lot of fans the wrong way, but MCU star Samuel L. Jackson's unbotheredness is something we should all aspire to when responding to haters.
Jackson–who has been in the Marvel Cinematic Universe since day one in his role as Nick Fury—spoke to Variety about Scorsese's comments, saying, "I mean that's like saying Bugs Bunny ain't funny. Films are films. Everybody doesn't like his stuff either. Everybody's got an opinion, so I mean it's okay. Ain't going to stop nobody from making movies."
Of course, Samuel L. wasn't the only Marvel alum to share their feelings on Scorsese's belittling comments.
Guardians of the Galaxy director James Gunn really wasn't happy with Scorsese's criticisms. He tweeted on Friday, "Martin Scorsese is one of my 5 favorite living filmmakers. I was outraged when people picketed The Last Temptation of Christ without having seen the film. I'm saddened that he's now judging my films in the same way."
The filmmaker then went on to clarify his comments in another tweet, making sure he wasn't blowing the comparison out of proportion. He wrote, "And I'm not saying religious zealotry is the same as not liking my movies, or in the same category. What I'm saying is I'm not fond of people judging things without actually seeing them, whether it's a movie about Jesus or a genre."
These responses from MCU stars and fans alike come after a recent interview with Empire, where Scorsese was specifically asked about Marvel. The director went on to argue that the 20+ MCU films should be considered something other than cinema.
"I don't see them," he proclaimed. "I tried, you know? But that's not cinema. Honestly, the closest I can think of them, as well made as they are, with actors doing the best they can under the circumstances, is theme parks. It isn't the cinema of human beings trying to convey emotional, psychological experiences to another human being."
|
en
|
Storage Units in Oxford, FL on County Road 466 | Southern Self Storage
352-775-0656 | Pay bill online
Southern Oxford, FL - County Road 466
Storage Units at 4150 E County Road 466 in Oxford, FL 34484
4150 E County Road 466
(352) 775-0656
About Southern Self Storage The Villages Located at 4150 County Rd 466
Welcome to "The Villages" Florida- Americas Friendliest Hometown! Need a place to store your golf clubs when the weather is too hot? Or maybe you need a place for your RV to stay while you are visiting for the winter season or even a dry home for your boat. Well look no further than Southern Self Storage The Villages! Located just East on CR 466 on the corner of 301- neighbors to good old Jennings Packing Fruit Stand near the railroad tracks!
Our facility is at the ideal location just minutes from beautiful Lake Miona and many campgrounds for a fun filled convenient weekend getaway that is close to home. We offer various parking accommodations for any car, boat or trailer in short term and long term options!
Renting your home in season? Purchasing one in the summer? We have various rental choices both in climate and non-climate availability. As small as a locker size to store your Christmas Decorations all the way to a small warehouse size to help your business be successful. You will find it convenient and easy with our month to month lease and many billing choices to choose from.
You will have peace of mind knowing that your valuables are stored at a trusted facility, equipped with an accessible resident manager, state of the art security cameras, easy personalized gate access, and oversized isles for your semi-truck deliveries.
So call today and let our storage professionals make your experience one that makes you want to tell your friends!
If headed south on US-301, take a left on East County Road 466, and the location will be on your left.
If headed north on US-301, take a right on East County Road 466, and the location will be on your left.
Traveling eastbound on East County Road 466, our facility will be on your left just after the US-301 intersection.
Traveling westbound on East County Road 466, our facility will be on your right just after the Firestone Complete Auto Care.
Reviews for Southern Oxford, FL - County Road 466
Not only is this storage unit safe and secure, the managers are top notch! Ginger went above and beyond to take care of us during our move. We arrived at 1am and Ginger stayed up and made sure that we were able to access the gate and unit, unloaded, safely, and happy. I can't say enough great things about her and the facility. She made us feel like family immediately!
Jeffrey Strohman
I was very pleased with the SSS staff. They were very professional and accommodating for my RV storage needs.
Excellent Service by Ginger.
Ginger has always been very helpful and provided great guidance in selection of storage available.
Great people well run
We stored a 26 foot boat there. Ginger was very helpful and my experience was nothing but great. Will be using them again.
Truely great place
WOW Ginger went out of her way to make sure everything was met to my expectations' . I had used this storage facility in the past and it did not let me down then or now for great service. Thanks again.
|
en
|
Added few more links at the navigation bar below the top image, that was done at the horizontal.php file. Put also the heading font upright because generally I don't like italic. Turned on optioncount for Categories and show_post_count for Archieves, these are done in the sidebar.php file.
Ovarian cancer is not the silent killer it was once thought to be. Studies have shown that there are symptoms that appear in the early stages of the disease. Recognition of these symptoms in the early stages is critical. Currently, less than 20% of cases are diagnosed in the early stages, and the 5-year survival rate is 20% to 30% when diagnosed at stage III or IV, but when diagnosed in the early stages the probability of cure increases to 90% to 95%.5
A new biomarker, HE4, has shown an increased sensitivity and specificity for detection of ovarian cancer over that of CA125 alone. HE4 was also found to increase the sensitivity of CA125 for the detection of ovarian cancer in patients presenting with a pelvic mass.
The new CA125 + HE4 risk stratification tool is a new differential diagnostic for women presenting with pelvic mass to help determine the most appropriate course of care. It is designed to measure levels of the CA125 and HE4 proteins in the blood to aid in the risk stratification of women who present with pelvic mass. It may help determine the best course of care for women presenting with a pelvic mass.20
|
en
|
Who Is Winning the Destiny 2 Guardian Games? – Gaming Hybrid
By Twinfinite May 3, 2022 No Comments3 Mins Read
The Guardian Games have actually begun in Destiny 2, which suggests gamers are most likely would like to know which class is leading the charge in transferring those hard-earned medallions at the Podium inthe Tower In this guide, we'll be describing who's winning the Destiny 2 Guardian Games every day, when the outcomes are revealed.
As the Guardian Games have actually only simply been revealed today, presently no one is winning.
However, the (*2 *) will be revealing at 11am PT every day whether the Titans, Warlocks or Hunters are winning every day, so you can examine there, or return to this post as we'll have whatever you require to learn about who remains in the lead as quickly as the info's provided.
Based off present engagement rates shared by Bungie in its article revealing this year's Guardian Games, it looks like however the Hunter's have a greater engagement rate with the video game, with Warlocks in a 2nd and Titan's flagging behind in 3rd.
While this does not always indicate the Hunter's are winning, it does indicate that, if this pattern continues, they may have the edge.
How Do Guardian Games Work?
Like in previous years, gamers will be entrusted with finishing specific activities and small missions called Contender Cards andPlatinum Cards These activities are versatile, so you do not require to be visiting at a specific time every day.
Completing Raids, Dungeons and competitive PvP competitors like Trials of Osiris and Survival, the Seasonal Activity on a greater trouble will reward gamers with higher-tier medallions.
Completing drop-in material like Gambit, Vanguard Strikes, Quickplay Crucible and Throne World activities at the basic trouble level will reward you with lower-tier medallions.
Gold medals can likewise be made by finishing Contender Cards in simpler activities, while Platinum medals drop when Platinum Cards are finished on harder material. In other words, you'll make medals or medallions for basically anything you do.
New this year, nevertheless, is Strike Scoring, which consider play time just for Guardian Games playlists. There are likewise Strike Medals which reward gamers for managing excellent gameplay accomplishments, like getting opponents with Shatter, or another specific relocation or unique.
When Does Destiny 2 Guardian Games End?
The Guardian Games will begin today, May 3, and end on May 24.
So what are you waiting on? Get grinding out those medals and lighting the torches!
For more Destiny 2 ideas and techniques, make sure to have a look at the links listed below.
Destiny Games Guardian Winning
Previous Article'Actraiser Renaissance', 'Terraria', 'Marvel Future Fight', 'Horizon Chase', 'LEGO Brawls', and More – TouchArcade
|
en
|
Topgallantnovel Reincarnation Of The Businesswoman At School online – Chapter 1759 – Don’t Mess with Goddess Gu cracker wiggly -p1 – Titus Book
Skip to content
Menu
Sample Page
Titus Book
Topgallantnovel Reincarnation Of The Businesswoman At School online – Chapter 1759 – Don’t Mess with Goddess Gu cracker wiggly -p1
A story by Troy Marnia on October 8, 2022 .
Eximiousfiction Reincarnation Of The Businesswoman At School txt – Chapter 1759 – Don’t Mess with Goddess Gu abashed lonely -p1
Novel–Reincarnation Of The Businesswoman At School–Reincarnation Of The Businesswoman At School
Chapter 1759 – Don’t Mess with Goddess Gu ask erect
“Well, don’t defeat them too very much. It won’t should you a bit of good when it ends up being severe.” In the long run, the guy could only point out to these phones take care.
“Well, never do better than them as well highly. It won’t should you any good whether it gets really serious.” Ultimately, the man could only point out to the crooks to be cautious.
Chu Peihan smacked Su Tong’s experience, even though Hao Went punched Mingzhe heavily. They screamed in soreness and aimed to battle in vain.
Shao Zihan was also a foodie, and she could fail to remember her issues when she saw delicious food. What manufactured Zhang Zikai jealous of her was that Shao Zihan never became body fat however very much she consumed.
“G.o.ddess Gu, be sure to help me train them a memorable session,” explained Zhang Zikai.
Though Shao Zihan was in a negative frame of mind now and she might not exactly have appet.i.te, Gu Ning still invited her out from politeness.
Mingzhe stayed silent. He was unwilling to present in, so he was determined to consider revenge, though not now. For Zhang Zikai and Shao Zihan, he actually didn’t dare to injured them.
Reincarnation Of The Businesswoman At School
Although Shao Zihan is in a terrible feeling now and she might not exactly have appet.i.te, Gu Ning still invited her out of politeness.
“Hi, G.o.ddess Gu!” Shao Zihan was packed with excitement.
When there is no reward struggle plus the person was dependable, Gu Ning wouldn’t deliberately have a yardage gone, as it was also part of her relationships.
“As you desire,” reported Gu Ning, then offered an order. “Peihan, Hao Went, the two of you will do it. Ensure it is quick.”
There was no need to request a lot of people to deal with two common individuals. In fact, any kind of them were definitely adequate to defeat them up. On the other hand, Gu Ning still decided to let Hao Went contend with the child, and Chu Peihan would deal with the young lady.
And then, they kept together with each other.
Section 1727: Never Surpass Them too Seriously
“Zihan, i want to carry out the arrival, this can be G.o.ddess Gu, Gu Ning, Normally i talk about to you,” stated Zhang Zikai to Shao Zihan.
“As prolonged as you have an appet.i.te, you are able to actually eat up to you desire,” stated Gu Ning.
Seeing and hearing that, the two guys didn’t know very well what to convey. They definitely couldn’t stay calm if their girls and shut down brothers betrayed them while doing so, so they recognized what Gu Ning and her pals were actually carrying out now.
Though Shao Zihan is at a negative feeling now and she may well not have appet.i.te, Gu Ning still asked her from politeness.
“G.o.ddess Gu, you should help me to help them learn a memorable course,” stated Zhang Zikai.
Reincarnation Of The Businesswoman At School
“Zihan, permit me to do the launch, that is G.o.ddess Gu, Gu Ning, I usually look at with you,” claimed Zhang Zikai to Shao Zihan.
“Zihan, let me perform the launch, this can be G.o.ddess Gu, Gu Ning, I usually look at together with you,” claimed Zhang Zikai to Shao Zihan.
Shao Zihan was a foodie, and she could forget about her anxieties when she discovered delectable foodstuff. What manufactured Zhang Zikai envious of her was that Shao Zihan never increased extra fat regardless how very much she ate.
Section 1727: Never Defeat Them too Greatly
Reincarnation Of The Businesswoman At School
Observing Shao Zihan’s concept, Gu Ning grasped that she desired to vent her negative feelings when you eat.
If Zhang Danling recognized what type of individual her relative really was, she wouldn’t side with him and guard him.
Chu Peihan and Hao Jogged didn’t care whether or not they would call up law enforcement and directly traveled to do better than them.
Shao Zihan was also a foodie, and she could neglect her concerns when she found delectable foods. What made Zhang Zikai envious of her was that Shao Zihan never became extra fat regardless how considerably she ate.
Before too long, Gu Ning called Chu Peihan and Hao Jogged to halt. Whilst they didn’t believe it had been plenty of, they believed whenever you should stop. It might be challenging if it has become severe of course.
Reincarnation Of The Businesswoman At School
“As you want,” said Gu Ning, then offered an order. “Peihan, Hao Happened to run, the two of you will do it. Ensure it is easy.”
Novel
“Hi, G.o.ddess Gu!” Shao Zihan was full of enthusiasm.
Regardless of what these people were planning to eat, she should certainly be a part of them. Zhang Zikai still experienced enthusiastic at the moment when Gu Ning asked these phones dine together with each other not since she didn’t treasure Shao Zihan, but due to the fact she believed that Shao Zihan vented her negative feelings by eating.
“You do not determine what has transpired, therefore you said that. What if your woman along with your close up brother betray you while doing so? Would you like to relax and forgive them?” said Chu Peihan in the acerbic sculpt.
History of Llangollen and its Vicinity
Henyee Translations
Novel
Observing Shao Zihan’s manifestation, Gu Ning realized she want to vent her negativity by consuming.
A self-centered guy like him would not think about what he possessed accomplished. Though it wasn’t perfect, he didn’t believe it absolutely was a big offer.
Hearing that, Shao Zihan circular her vision in distress simultaneously. Not surprising she experienced that Gu Ning searched very acquainted. It ended up that Gu Ning was the famous G.o.ddess Gu and also the skilled gal via the internet.
Even so, it was actually simply a good manners when Gu Ning mentioned they were good friends. There had been many kinds of buddies, like pals which you have recognized for years, decent friends, widespread pals, associates, and the like. And Gu Ning and Zhang Zikai were actually only colleagues in the meantime.
Gu Ning wasn’t scared that Mingzhe might injury her car or truck whenever they had been eliminated, because there were definitely surveillance cams on the parking lot. She wouldn’t continue to be here at all times merely because Mingzhe might injury her auto.
—
Categories: Uncategorized
Post navigation
Fabulousfiction – Chapter 1838 – Dongfang Qi Meets Wu Shunhua known milk suggest-p3
Prestantiousnovel fiction – Chapter 1750 – Give the Flood Dragon to Leng Shaoting upbeat separate suggest-p3
Leave a Reply Cancel reply
Your email address will not be published. Required fields are marked *
Comment *
Name *
Email *
Website
Save my name, email, and website in this browser for the next time I comment.
Search for:
Recent Posts
Eximiousfiction – Chapter 767 – Being Kind to the Enemy Was Being Cruel to Oneself racial crate read-p3
Jellynovel Imperial Commander: His Pretty Wife Is Spoiled Rotten novel – Chapter 714 – Is There A More Shameful Excuse Than This? permissible town suggest-p1
Topgallantnovel Imperial Commander: His Pretty Wife Is Spoiled Rotten read – Chapter 873 – No Better Food Than Your Meatballs, No Better Fun Than Your In accessible please propose-p2
Jamnovel – Chapter 987 – He Will Shoulder Both aware sedate -p2
Gallowsnovel Imperial Commander: His Pretty Wife Is Spoiled Rotten – Chapter 1037 – Getting to the Nitty-Gritty same happy propose-p1
|
en
|
Make sure it is clear and visible on the invoice with a call-to-action to leave a 5 star review on Google.
This process works best for those organizations that sell products online. Asking for a review on how the experience with the company went immediately after the purchase is an excellent solution.
If you use a system that can use automation after a form is submitted, you can produce a landing page that has a direct link to your GMB listing.
This process makes it easy to gain Google Reviews without having to do a lot of work. But it also allows for unhappy customers to leave reviews on Google. Not that they can’t already, but you’re providing a direct link for them to do so.
If you are using a CRM with an automation system, developing an email with personalization and a direct link to your Google My Business listing is easy.
Create a workflow that automatically sends the email to the customer after the product is delivered or service is complete.
Don’t be afraid to ask you customers for feedback. In a recent study, 76% of consumers are willing to leave a review for a company they had a positive experience with.
As many people trying to shift from blogger to wordpress, it seems i am one of those miorities. Despite how powerful wordpress is, i was tired with updating wordpress day by day. So i gave up my DIY space 6 months ago, and dived myself in blogger. So far, i am totally satisfied. New year is coming, it’s time to migrate blogs.
This blog provides a way to migrate as well as the migration tool, named Blog2blog. It is easy to use, however which i dont like, it is based on dot NET.
Here is some limitations: it cannot import/export comments, and it can only import up to 50 posts due to Google API.
|
en
|
What is another name for IODOSORB gel? – Draftlessig.org
What is another name for IODOSORB gel?
Can you buy IODOSORB over the counter?
Is IODOSORB the same as Iodoflex?
What type of dressing is IODOSORB?
Is IODOSORB a debriding agent?
When should I stop using IODOSORB?
How much does IODOSORB cost?
When do you use IODOSORB?
What is Iodosorb good for?
What is the generic name for Iodosorb gel?
Is iodine good for wounds?
Cadexomer iodine is an over-the-counter (OTC) product used for cleaning wet ulcers and wounds and as an antiseptic for minor cuts, scrapes, and burns. Cadexomer iodine is available under the following different brand names: Iodosorb.
IODOSORB◊ / IODOFLEX. IODOSORB/IODOFLEX are a pair of Cadexomer Iodine-based products, available in two forms – gel or pad.
IODOSORB Gel is a sterile antimicrobial dressing formulation of Cadexomer Iodine. When applied to the wound, IODOSORB absorbs fluids, removing exudate, slough and debris and forming a gel over the wound surface.
The wound may look bigger during the first few days it is treated. Do not use Iodosorb (cadexomer iodine gel) for longer than 3 months without checking with your doctor.
The cash price for Iodosorb is $186.99 on average. A SingleCare Iodosorb coupon, however, reduces that cost significantly to $59.75 when Iodosorb is prescribed by a physician.
1. IODOSORB Ointment should be changed when saturated with wound fluid, indicated by a loss of color, usually 2-3 times a week or daily if wound is discharging heavily. 2. Gently and thoroughly remove any IODOSORB Ointment at each dressing change.
IODOSORB is used for the topical treatment of persistent weeping wounds such as leg ulcers. When applied to the wound, IODOSORB has shown to disrupt and substantially eradicate mature biofilms.
Uses of Iodosorb: It is used to clean wounds. It is used to promote healing of skin ulcers and wounds.
Iodosorb Powder is used for Venous stasis ulcers, Wet ulcers, Pressure sores, Infected surgical wounds and other conditions. Iodosorb Powder may also be used for purposes not listed in this medication guide.
Iodosorb. Generic Name: Cadexomer Iodine Gel (ka DEX oh mer EYE oh din) Brand Name: Iodosorb. Medically reviewed by Drugs.com. Last updated on June 9, 2020. Overview.
Iodoform is a simple structural compound; greenish yellow hexagonal solid with a strong, penetrating odor; containing about 96 per cent of iodine; melting point 119 C; soluble in chloroform and ether and somewhat in alcohol and water: used as a topical anti-infective, applied to the skin.
People began using tincture of iodine as a wound disinfectant in the late 1800s. Although not as popular today, it is still in use as an antiseptic to prevent infection in minor cuts, scrapes and burns. Tincture of iodine is suitable for topical use only and can be irritating to your skin.
|
en
|
In short, vaping dry herb is very safe while illegal and grey market oil cartridges may not be. Dangerous pesticides, heavy metals such as lead, and Vitamin E Acetate may be inside these unregulated cartridges, and that is where the health concerns pop up from. Lipid pneumonia is the case which afflicted many people worldwide, the main culprit of this being Vitamin E Acetate.
|
en
|
Dr Edward Yang Tuck Loong | Radiation Oncology | Radiation Treatment | Parkway Cancer Centre India
Email: edward.yang@parkwaypantai.com
MBBS (Singapore), DMRT (London), FRCR (United Kingdom), FAMS (Radiation Oncology)
English, Hokkien, Indonesian, Mandarin, Teochew
Dr Yang Tuck Loong Edward is a Senior Consultant, Radiation Oncologist at Parkway Cancer Centre. He is experienced in treating malignancies in all sites. He has special interests in the management urologic, breast, gynaecological and prostate cancers and central nervous system tumour including brain and spine tumours using stereotactic volumetric arc therapy. He also has vast experience in treating head and neck and lung malignancies. He also has significant experience in SBRT, IMRT and SRS using both linear accelerator based frameless SRS as well as Gammaknife procedures. He has now 35 years of Radiation Oncology experience.
Dr Yang graduated from the National University of Singapore in 1981. He started his training in Radiotherapy in 1983. He did his post graduate training in the Singapore General Hospital and National Cancer Centre Singapore, and had worked in the United Kingdom as Senior Registrar in Middlesex Hospital London and honorary lecturer for the Middlesex-University College Medical School from 1986 to 1988.
Dr Yang was previously the Senior Consultant in Radiation Oncology at the National Cancer Centre. He led in Urologic Oncology in the Department of Therapeutic Radiology. Dr Yang began a very effective and successful 3D conformal radiotherapy programme for prostate cancer in 1997. As technologies progressed he now does IGRT (Image Guided Radiotherapy) as a routine for all patients to ensure optimum accuracy and therefore enables better sparing of adjacent normal tissue.
Articles Contributed by Dr Edward Yang Tuck Loong
Aug/Sep 2019 HealthNews 2019 Public Access
Radiotherapy is an established way of treating cancer. Parkway Cancer Centre's Dr Edward Yang looks at how it works and...
Dr Edward Yang from Parkway Cancer Centre looks at how palliative radiation treatment can help patients manage symptoms of cancer...
|
en
|
The Hotel Show Saudi Arabia 2017 - Hotelier Indonesia Events
Home 2017 Feature Hotel Expo Middle East The Hotel Show Saudi Arabia 2017
Hotelier Indonesia at 1:37 PM 2017, Feature, Hotel Expo, Middle East,
4 - 6 APRIL 2017 JEDDAH CENTRE FOR FORUMS & EVENTS
Why invest in the Saudi market The Saudi Arabia hospitality market is forecast to reach a value of $93bn; with increased development of mid-market hotels and a vision to double the number of hotel rooms by 2030, tourism is the 2nd biggest contributor to the Kingdom's economy.
There are 47,431 rooms and 124 hotel projects currently under development including the world's biggest hotel 'Abraj Kudai'. PRODUCT SHOWCASE The Hotel Show Saudi Arabia features hundreds of global exhibitors representing all sectors of the industry; from hotel supplies to interiors and technology.
If you are looking to source products, services and solutions for your facility, this is the show for you. Industry News Saudi Arabia's hospitality industry is set for solid growth as revenues are forecast to reach $23.1bn by 2020. According to the Alpen Capital report, Saudi Arabia will witness major expansion works being carried out at its two holy mosques in Makkah and Madina, the report said, as well as the addition of 47,000 rooms by 2020.
|
en
|
ETheMadAssassin is an MC from Greensboro, North Carolina who’s been on the rise in the underground for about over 15 years now. He just dropped the 3rd installment of his Bear Handz series at the beginning of last year but after doing a couple of features since then, E’s returning with a 4th installment produced entirely by Twelvebit.
After the “Jungle” intro, the first song “Discipline” finds E talking about how he came up differently than others over a nightly instrumental while the track “Stay Paid” of course spits about making money over a dreary beat. The song “Gunsmoke” shit-talks the lames who approach his turf over a spine-tingling instrumental & after the “Reasons” interlude, the track “Children of the Night” talks about being an insomniac over an uncanny boom bap beat.
The song “Don’t Mix Ya Dishes” talks about how life’s a bitch over a depressive instrumental & after the “100 Reasons” interlude, the track “Shots of Gin” talks about drinking over a fittingly intoxicating beat. The song “10” talks about being deep rooted over an ominous instrumental & then the album ends with “How Many”, where E ponders a few questions over an icy instrumental.
Overall, it’s a solid album. I can definitely hear Ethemadassassin‘s growth on here as the dude continues to rap his ass off harder than he ever has before & Twelvebit’s production is a nice fit as well.
Score: 3.5/5
legendswillneverdie LWND Reviews, New reviews Leave a comment September 3, 2020 1 Minute
Text Widget
This is a text widget. The Text Widget allows you to add text or HTML to your sidebar. You can use a text widget to display text, links, images, HTML, or a combination of these. Edit them in the Widget section of the Customizer.
|
en
|
New Delhi: Mobile network has not yet reached around 50,000 villages across the country, the government said today.
There are many locations in the Northeast, Naxal-hit states, Andaman and Nicobar Islands and Lakshadweep where mobile network has not reached yet, Telecom Minister Manoj Sinha said in Lok Sabha.
"We have never claimed that mobile network has reached all over the country. There are around 50,000 villages where mobile network has not reached," he said.
The Minister said he has written to all states to inform his Ministry how many of the villages in their state the mobile network has not reached.
Sinha said an ambitious project 'BharatNet' is being implemented for providing 100 mbps broadband connectivity to all Gram Panchayats, approximately 2,50,000, in the country.
The phase-I to connect 1,00,000 GPs is being implemented currently, he said.
"As on March 31, 2017, trenching and ducting has been completed for 11,294 km (4,780 GPs), Optical Fibre Cable has been laid for 12,172 km (4,213 GPs) and 443 GPs have been provided with broadband connectivity," he said.
Replying to a supplementary, the Minister said the problem of call drops has been resolved to a great extent and as per a survey of TRAI, the call drop situation has been improved by 60 per cent.
He said with the allocation of more spectrum through auction and installations of BTS (Base transceiver station) in more areas, call drop problem has been improving.
Replying to another question, Sinha said the government has no plans to offer shares of BSNL to its employees and the company is making operating profit in last two years after increasing the customer base.
— PTI
Tags
Follow PTC News on Google News
Share
About Us
PTC News is dedicated to the soul and heritage of Punjab offering authentic updates on current events, news, happenings and people that are of interest to Punjabis all over.
|
en
|
NEWS RELEASE: ‘My Beloved’ Spirit To Be Set Free in East Van this Valentine’s Day Odd Society Spirits Set to Release Amaro on February 10, 2017 Vancouver B.C., January 31, 2017 — There is a whole lot of love brewing in East Van this Valentine’s Day with the release of Odd Society Spirits’ first amaro, Mia Amata, on February 10, 2017. Known for creating award-winning European liqueurs, distiller Gordon Glanz produced this Italian digestif with his daughter Mia Glanz. Along with being a nod to her name, Mia Amata translates to “my beloved” in Italian. “My first-born Mia [Glanz] is the creator of our beloved amaro,” said Gordon Glanz, Odd Society Spirits founder and distiller. “I acted as a resource to her during this three-year passion project but it really is her baby.” Before opening in 2013, Gordon had amaro on his mind. At the time, Mia was studying ethnobotany at the University of British Columbia. She discovered that many indigenous cultures living in the
Trading Post Brewing is committing $5000 over the next five years to the Kwantlen Polytechnic University's Brewing Lab for the next generation of craft brewers. The scholarship is named after John Mitchell, who is known as the grandfather of the craft beer movement in Canada. He opened Canada's first modern day craft brewery, Horseshoe Bay Brewing, in 1982. The scholarship may increase over the next five years. Trading Post will be hosting the first annual Fort Langley Beer and Food Festival this coming May 20 and have dedicated a portion of the proceeds from this festival for years to come to support this scholarship.
i guess i gotta stick with the training, now... NEW Stout competition: B.C. brewers to box each other for charity Plus, check out Rebecca Whyman's beer picks for this week CBC News Posted: Jan 17, 2017 4:19 PM PT Last Updated: Jan 17, 2017 4:20 PM PT Ian Kampman of Brassneck Brewery was a contender at the 2016 edition of Beer Wars. This year, On The Coast beer columnist Rebecca Whyman will enter the ring. (Jeremy Allingham/CBC) 2 shares Facebook Twitter Reddit Google Share Email Related Stories OTC Beer and Wine Milkshake beer could be among 2017's craft brewing trends Craft brewery boxers take a swing at bulging beer guts People in B.C.'s craft beer industry are ready for another round — in this case, another round in the boxing ring. The second annual B.C. Beer Wars will see people in Vancouver and Victoria's craft beer scenes box each other to benef
powell street brewery has new saisons available and they'll be pairing them with pies for international pie day! 5 easy hangover-relief recipes putting brewery waste-water to good use are you genetically predisposed to hate hoppy beer? beer trends for 2017: the independent uk bon apetit taps magazine cheers
|
en
|
Tortall and Other Lands is a collection of tales from all over Tortall - and a couple from our own world.
The 11 stories feature mostly previously unknown characters, but also a few well known old friends.
My favourite stories are The Dragon's Tale about Kitten, Daine's fosterdragon, helping a woman who's been cast out from societ, and Mimic, wherein the sheepherder Ri helps any wounded creature she comes across, however strange. I also particularly enjoyed Student of Ostriches, where we learn the backstory of one of the great female shang warriors.
I did not in particular like the two stories set in our own world. Not that they were bad or anything - they just don't fit in. I expected magic and fantasy, not troubled teens testing their new housemother.
Mostly, reading this book, I just felt like rereading all Pierce's previous books about Tortall :) especially the first three series about Alanna, Daine and Keladry. If you are a fan of Pierce's books, this is a perfect addition and a very nice way to spend a couple of hours.
ISBN13: 9780375866760
369 pages / Published in 2011
Etiketter: 4 stars author: Pierce/Tamora content: magic content: monsters genre: fantasy genre: short stories genre: YA Publisher: Random House reviews Tag: in English
|
en
|
URL: food4less.com
Food 4 Less : Shop Groceries, Find Digital Coupons
Save On Your Pickup or Delivery Order
SAVE Big on Your Next Order. Sign in for $5 OFF and 500 Bonus Fuel Points, on your next pickup or delivery order of $50 or more.*. Sign in Now or Create an Account. If you are signed in and do not see a coupon, you may not be eligible for this promotion.
Learn More About Fuel Points Programs
Groceries: Earn 1 Fuel Point on each dollar spent on most groceries. Be on the lookout for special bonus Fuel Points promotions and offers to earn even more! Alcohol, fluid milk and milk products are excluded in some states where required. Tobacco, money orders, postage stamps, product deposits (if applicable) promotional tickets, tax and fees
Our immune system does many things, but most importantly it fights off illness and foreign invaders. We can support our immune system in various ways, including consuming foods high in nutrients that play significant roles in our immune health. Let's discuss this topic in more depth. Why We Should Focus on Supporting Our Immune Systems
Make sure that you entered the entire card number with no spaces or dashes. Make sure you are entering the 11, 12, or 13-digit number on the back of your Card, starting with the number 4. Or, enter your 10-digit Alt ID instead." It's possible that your card number is associated with another digital account. Please contact our Customer Service
Screw on the band of the jar, leaving off the flat lid, to help keep the flowers in place as you arrange them. Your goal will be to cover the grid with flowers. Placing stems will be the same for any type of vase: A general rule is to place taller, focal-point flowers in the center, then postiion additional tall, full flowers radiaing out from
Frequently Asked Questions Food4Less Wine
Enter promo code SAVE25NOW to receive 25% off all packs. Promo codes cannot be combined and are not combinable with any other promo codes. Offer ends at 11:59pm (PST) on 3/31/22. Check back with us for more information on when coupons will be available on Kroger Wine. Promotional codes and vouchers can be used on select orders.
It's the perfect card for rewarding you for shopping at The Kroger Co. Family of Stores. Enjoy 50% MORE Fuel Points. on grocery purchases every day. 1. No annual fee! Plus, get exclusive offers like a 2% discount off Our Brands, including Simple Truth ®, Kroger ® Brand and more. 2.
555 W 2Nd St Ste A San Bernardino, CA
Orders shipped by Kroger that don't qualify for free shipping will ship at the standard rate of $4.99. Kroger Third Party Partner purchases will not be applicable to the $35 threshold. *15% Off First Purchase: Discount applies to merchandise only, not on applicable taxes, shipping, handling charges, or products from third party partners
The mixture will foam. 1. Adults: Tear off two sheets of parchment big enough to cover the bottom and sides of the pan. 2. Kids: Line the square baking pan with parchment, making sure the sides are covered by overlapping the two sheets in a cross formation. 3. Kids: Grease the paper with vegetable oil. 4.
Associate Investments. Since March, we've invested more than $1 billion to reward our associates and safeguard associates and customers. These investments include associate bonuses, wage premiums, store credits and fuel points, paid leave, personal protective equipment and contributions to The Kroger Family of Companies Helping Hands fund.
Money Services, Prepaid Phones, Gift Cards
Our Brands. Payments and Services. We provide a convenient collection of payment, gift card, prepaid wireless and money-management tools and services available through your local Kroger Family of Stores, giving you one-stop access to the every day essentials you need to move your life forward. Gift Cards. Debit. Kroger Pay. Lottery.
Ways to Shop – Ship
Payments and Services. It's easy to get the pantry staples and essentials you need by shipping them directly to your home. Browse 1,000s of favorites to find deals on bulk buys, beauty essentials and other products you love. You'll even earn fuel points with each purchase. Plus, enjoy 15% OFF your first order and FREE shipping on all orders
Boost Membership Grocery Delivery Deli/Bakery Ordering Digital Coupons Gift Card Mall Mobile App Receipt Survey Invitation Recipes My Lists Store Locator Weekly either by your browser settings or by turning the toggle above "Off", you will experience less relevant advertising. Please note: Clearing your cookies at any time will undo
1. Create coin-shaped pieces by cutting perpendicular to the long side of the cheese log. 2. Depending on the desired serving portion, cut the round coins in half again for a moon shape or in quarters for a triangular wedge shape.
Grocery Delivery in Bloomington, CA
Get online grocery delivery in Bloomington, California, with same day grocery delivery to your door! Simply order your groceries online and get the best grocery store delivery near Bloomington.
Shop for Lawn & Garden in our Garden, Patio & Grills Department at Food4less. Buy products such as Raid® Outdoor Fresh® Scent Ant & Roach Killer for in-store pickup, at home delivery, or create your shopping list today.
Choose recipes that include three different food groups and emphasize lean meats, vegetables, fruits and whole grains. Start by filling half your plate with non-starchy veggies, about ¼ of your plate with protein-rich foods and finish the meal with a dash of healthy fats such as avocados, nuts or seeds. If you typically need a mid-meal bite to
Beer Delivery in Lancaster, CA
Get online beer delivery in Lancaster, California, with same day beer delivery to your door! Simply order your groceries online and get the best grocery store delivery near Lancaster.
Beginner's Guide to Vitamins & Supplements
Your Guide to Pork Cuts & Cooking Methods
Pork Chops. Sometimes called rib chops, this popular cut of pork comes from the loin, which is the area between the shoulders and hips. Like beef steaks, pork chops are available in several varieties and thicknesses, and in general they're tender, lean and easy to cook.
Financial Product Privacy Policy
There are also easy ways to reduce fat in baking. You can use applesauce or prune puree for up to half the amount of oil or butter in baked goods. In addition to reducing fat calories, this substitution improves vitamin levels. Bake time will be about 25% faster, too! Most recipes can have up to one-fourth of the oil or shortening shaved off
Vegetarian: No meat, poultry or fish. Yes to eggs and dairy products. Pescatarian: Fish-eating vegetarian – still no meat or poultry, but yes to eggs, dairy, fish and shellfish. Celiac/Gluten-free: Gluten is found in wheat, barley, rye and spelt; so bread and breadcrumbs, pasta and beer are off limits. Naturally glutenless foods include
There are plenty of foods, nutrients and habits that help boost your child's immune system! Check out our Dietitians' top 10 recommended foods and tips for back-to-school immune health.
Add fake spiders and finish with more Halloween-themed candy. Fresh and fun: Place a small orange cheeseball in the center of the board. Add several small dishes around the board and fill with pistachios, olives, blackberries or cashews. Arrange sliced bell pepper, carrot sticks and apple slices around the board.
Most slow cookers have a low and high setting, ranging between 175°F to 215°F. Once the cooking timer has gone off, the slow cooker typically keeps food on a warm setting around 165°F to 175°F. A general rule of thumb is that cooking on low will take about twice as …
Benefits of Drinking Water. Did you know your body is about 60% water, and your blood is 90% water? Water keeps your entire body functioning properly, so it's important to ensure you're getting the right amount every day.
|
en
|
Kelly Kilmer Artist and Instructor: Influences, Creativity and How We Think
Influences, Creativity and How We Think
I've read two inspiring blog posts today that I wanted to share. I know that I often link other folks blogs here but I really hope that you will take time to stop by, read their words and let them seep in a bit...
Alisa Golden's post on Peer Pleasure: Robert Duncan, Jess, and Friends "As we create works we are all influenced in some way. We may subconsciously make similar work, we may respond to a feeling, concept or specific material in the work, or we may intentionally choose to use what we see."-Alisa Golden
Quinn McDonald's post, A New Kind of Class
"Because I'm there to demo techniques, make suggestions, and help on the discovery step when something goes wrong, the participants learns a skill, along with problem solving and self-confidence. The resulting curiosity and joy in discovery is the basis of a living a creative life." -Quinn McDonald
Labels: Alisa Golden, art influences, creativity, essence of me, inspiration, Quinn McDonald, tape journal, thinking
|
en
|
Order: RelevanceNewestRating - High to LowRating - Low to High Single-handle faucet has zinc and stainless steel construction and a maintenance-free ceramic disc cartridge. Retractable pull-down spout features stream and spray options. Low-flow aerator conserves your water supply. 1-Hole installation.
It installed easy, in our Lance RV worked perfect the old one must of been corroded inside the copper tubing finally quieted the 12volt water pump from cycling on and off and pressure is much better. So if you have lousy water pump pressure please check your fixtures for corrosion before spend the money on a new pump. 862767
I purchased this product to replace the original faucet in the RV. It fit perfectly! I'm 55 years old and I installed it myself! It looks great. Glad I bought this one from etrailer. Good company. 829295
|
en
|
This project will create a purpose built Business & Enterprise Centre for the DDEP sub-region with the aim of stimulating a culture of enterprise in Derbyshire, promoting the formation of new businesses and creating a more highly skilled workforce.
The project has been designed to fill a gap in Derbyshire's business support infrastructure. There is currently no dedicated facility where enterprise skills can be developed and new business ideas explored. It will support the creation of an integrated framework for activities to stimulate enterprise from schools, through the HE curriculum, post-graduation and into the community and workplace.
By concentrating on skills and pre-start support, the Centre will complement existing business incubators for new start businesses in Derby City and Derbyshire. It will provide a home for a range of activities aimed at stimulating higher level skills and an entrepreneurial culture in the DDEP area and it will support the germination of new business ideas that could then move onto incubators and subsequently to managed workspace. This is an important distinction as the proposed centre will not displace new businesses from existing workspace. Instead it will encourage and develop budding entrepreneurs and 'feed' them into incubators and grow-on workspace in the DDEP area.
|
en
|
NASDAQ:LCID hasn’t quite had the Wall Street debut its investors were looking for after its merger closed at the end of July. On Thursday, shares of LCID added 0.53% to close the trading day at $22.75. It was a positive day for the markets overall, so the fact that Lucid lagged the S&P 500 and NASDAQ is not exactly a bullish outlook. Shares jumped early in trading and hit as high as $23.29, but anything above $23.00 was acting as resistance and the stock got knocked back down by the closing bell.
Stay up to speed with hot stocks' news!
President Biden’s new infrastructure bill looks like it is approaching completion, as the bipartisan plan is close to being signed off on. What does this mean for electric vehicle companies? It’s no secret that the Biden administration has been bullish on renewable energies and electric vehicles, so the upcoming infrastructure bill will have more incentives for U.S. based companies. Transportation infrastructure is getting a massive boost, which should lead to a major upgrade of the country’s charging networks.
CCIV stock news
Speaking of President Biden, the White House is hosting U.S. electric vehicle automakers on Thursday as they pledge to boost sales in the U.S. by 40-50% by 2030. The companies that were invited are Ford (NYSE:F), General Motors (NYSE:GM), and European company Stellantis, and much was made on social media about Elon Musk and Tesla (NASDAQ:TSLA) not being included. Perhaps since Tesla is already 100% electric, it would have been fruitless to invite the company to a summit that talks about increasing the percentage of EV sales.
Like this article? Help us with some feedback by answering this survey:
Rate this content
Information on these pages contains forward-looking statements that involve risks and uncertainties. Markets and instruments profiled on this page are for informational purposes only and should not in any way come across as a recommendation to buy or sell in these assets. You should do your own thorough research before making any investment decisions. FXStreet does not in any way guarantee that this information is free from mistakes, errors, or material misstatements. It also does not guarantee that this information is of a timely nature. Investing in Open Markets involves a great deal of risk, including the loss of all or a portion of your investment, as well as emotional distress. All risks, losses and costs associated with investing, including total loss of principal, are your responsibility. The views and opinions expressed in this article are those of the authors and do not necessarily reflect the official policy or position of FXStreet nor its advertisers. The author will not be held responsible for information that is found at the end of links posted on this page.
If not otherwise explicitly mentioned in the body of the article, at the time of writing, the author has no position in any stock mentioned in this article and no business relationship with any company mentioned. The author has not received compensation for writing this article, other than from FXStreet.
FXStreet and the author do not provide personalized recommendations. The author makes no representations as to the accuracy, completeness, or suitability of this information. FXStreet and the author will not be liable for any errors, omissions or any losses, injuries or damages arising from this information and its display or use. Errors and omissions excepted.
The author and FXStreet are not registered investment advisors and nothing in this article is intended to be investment advice.
Feed news
Latest Forex News
Latest Forex News
Editors’ Picks
EUR/USD retreats below 1.1300 area as NFP-inspired dollar weakness fades
EUR/USD jumped to a daily high of 1.1333 with the initial market reaction to the disappointing November Nonfarm Payrolls data but quickly returned below 1.1300. Rising US Treasury bond yields seem to be helping the dollar stay resilient against its major rivals.
EUR/USD News
GBP/USDdrops to 1.3250 area as dollar regains strength
GBP/USD spiked above 1.3300 in the early American session with the initial market reaction to the gloomy US November jobs report. However, the greenback regathered strength on hawkish Fed commentary and forced the pair to turn south.
GBP/USD News
Gold struggles to capitalize on weak NFP data, holds near $1,770
Gold spiked to a daily high near $1,780 with the initial market reaction to the disappointing Nonfarm Payrolls data from the US but seems to be having a difficult time preserving its bullish momentum with the 10-year US T-bond yield staying resilient.
Gold News
The bull and the bear case for BTC
Bitcoin price saw a bullish impulse that faced massive headwinds before it tagged a crucial psychological barrier. Bitcoin is likely to experience massive volatility as the situation resolves over time.
Read more
Cyber Monday 2021 Discounts!
Glued to your trading screen on Cyber Monday? Upgrade your skills by signing up for FXStreet’s Premium service, offered at a discount of up to 50%. Fellow traders have already taken advantage of Black Friday profits. What about you?
Subscribe now!
Forex MAJORS
Cryptocurrencies
Signatures
©2021 "FXStreet" All Rights Reserved
About Us
About Us
Editorial Guidelines
Ethical Code
Corporate Identity
FXStreet Blog
Site Map
Terms and conditions
Contact us
Advertising
Jobs
Languages
Edition
Español
Italiano
Bahasa Indonesia
Português
日本語
繁體中文
简体中文
Русский
Français
العربية
Deutsch
Magyar
Türkçe
Tiếng Việt
Disclaimer
Note: All information on this page is subject to change. The use of this website constitutes acceptance of our user agreement. Please read our privacy policy and legal disclaimer.
Trading foreign exchange on margin carries a high level of risk and may not be suitable for all investors. The high degree of leverage can work against you as well as for you. Before deciding to trade foreign exchange you should carefully consider your investment objectives, level of experience and risk appetite. The possibility exists that you could sustain a loss of some or all of your initial investment and therefore you should not invest money that you cannot afford to lose. You should be aware of all the risks associated with foreign exchange trading and seek advice from an independent financial advisor if you have any doubts.
Opinions expressed at FXStreet are those of the individual authors and do not necessarily represent the opinion of FXStreet or its management. FXStreet has not verified the accuracy or basis-in-fact of any claim or statement made by any independent author: errors and Omissions may occur.Any opinions, news, research, analyses, prices or other information contained on this website, by FXStreet, its employees, partners or contributors, is provided as general market commentary and does not constitute investment advice. FXStreet will not accept liability for any loss or damage, including without limitation to, any loss of profit, which may arise directly or indirectly from use of or reliance on such information.
|
en
|
FORMER MISSOURI VALLEY COLLEGE WOMEN'S WRESTLER JACARRA WINCHESTER FINISHES COMPETITION AT TOKYO OLYMPICS - Missouri Valley College
Missouri Valley College | News & Events | News | FORMER MISSOURI VALLEY COLLEGE WOMEN'S WRESTLER JACARRA WINCHESTER FINISHES COMPETITION AT TOKYO OLYMPICS
Tokyo, Japan, (August 6, 2021) – Former Missouri Valley College women's wrestler Jacarra Winchester finished her competition in the 53kg women's freestyle wrestling tournament for the United States of America at the 2020 Summer Olympics in Tokyo, Japan, Friday morning.
Winchester, a 2015 individual National champion for the Missouri Valley women's wrestling team and the reigning World champion at 55kg, opened competition in the 53kg weight class representing the USA with a 7-0 decision victory over Olga Khoroshavtseva from the Russian Olympic Committee in the first round.
In the quarterfinal round, Winchester lost to Pang Qianyu of China in a 6-2 decision. However, Winchester was pulled into the Repechage bracket as Qianyu advanced to the gold medal match.
In the Repechage first round, Winchester defeated Laura Herin of Cuba in a 5-0 decision to advance to the bronze medal match. Facing Vanesa Kaladzinskaya of Belarus, Winchester lost in a first period fall, and finished with a 2-2 record in the competition. Mayu Mukaida of Japan defeated Qianyu, 5-4, in the gold medal match.
Two other former Missouri Valley wrestlers joined Winchester in Tokyo as part of the USA wrestling coaching staff. Clarissa Chun, a former National champion for Missouri Valley and a bronze medalist at the 2012 Summer Olympics in London, is an assistant coach for the women's wrestling team. Also, Nate Engel, a former All-American for the Missouri Valley men's wrestling team, is the personal coach for Adeline Gray, who won the silver medal for the USA in the 76kg women's freestyle wrestling.
|
en
|
r/managementconsulting
u/IPSOManagement
u/Alexandra_Smith
blog.iagility.com/transi...
u/AskGeebs
Transition from Big4 Federal Advisory to Commercial MBB/T2?
Currently working as a consultant at a Big4 firm in the Federal Financial/ Advisory sector and I am looking into making the transition over to the commercial management/strategy consulting world. What are some of the barriers to entry for someone in my position that has only worked in the public space? (background: currently have 4 plus yeares experience and an undergrad in Finance and Economics)
u/realdanielbyrne
4 Things the Warriors can Teach us About Team Building
Follow the lead of one of the most successful basketball team's in history by focusing on building a better team. Learn to share the spotlight and focus on engendering a culture of subordinating personal prominence in favor of team success. Focus on the individual strengths of the team members rather than trying to make everyone conform to the image of an indoctrinated clone. Be agile enough to pivot when necessary, and favor management or automatically gathered metrics over burdensome self reported stats.
u/pestrelief
pestreliefindia.com/blog/c...
u/coursesand
Is it possible to get into consulting outside of the typical college recruitment process?
I graduated a year ago from undergrad and am currently working in the architecture field. I have always considered management consulting, but I am now confident that I want to pursue this career path. However, I am worried about the recruitment process. I am not aiming for MBB, just something to help get some experience. Do I have any shot at breaking into MC without waiting until I get an MBA?
u/quaker19
If it isn't too personal, I was wondering if people would be willing to share how much they make and how many years of experience they have. Even those who have left consulting.
u/consultingkarma20
Does age matter when applying to MBB firms?
I need some advice on the path forward. I am a software engineer looking to move into management consulting, and like everyone, hope to get into a MBB. Some details: Work experience: 7 years PhD in Computer Science Age: 35 years Plan to start at a part-time MBA program at 36 at one of Haas, Kellogg, Booth part-time programs. I will probably be 39 when I graduate. The big question I have is: Do the MBB firms hire MBA grads with my profile? I'm especially concerned about the age. I understand that most new consultants/associates are around 28-32 years of age. Thanks!
u/plutoaintaplanet
Business Development... Sales?
So I'm doing a bit on reading about MC work. Now I understand it's very varied, and will depend on the context, and consulting line areas you work for and projects you work on. But the term Business Development keeps popping up...
Am I to take that this is something like what BD is to other 'consulting' gigs? i.e. in Recruitment, BD is pure sales calls
So are associates and consultants in the MC line of work expected to BD other MNCs to prospect for projects to work on?
u/Medilinks
Management Consulting Firms in Delhi
medilinksindia.com/
blog.iagility.com/how-to...
Talent Corner Gallery Images
talentcorner.in/galler...
u/enerama
Uzaktan Takip ve Yönetim Sistemleri & REMOTE TRACKING AND MANAGEMENT SYSTEMS
enerama.com.tr/2&uzak...
u/aditya1221
Are the mining and metal divisions of MBB considered management consulting?
Are the mining and metal divisions of MBB considered management consulting? Whether yes or no, what are some ways to enter into these divisions?
Corporate lawyers, telemarketers, middle managers have 'bulls**t jobs'
u/vucap
Organisational Psychologists Adding the Competitive Advantage For Risk Management
vucap.com.au/blog/o...
vucap.com.au/blog/w...
The Importance of a Lead Generation Strategy - 5 Key Things Your Strategy Needs
No business can survive without attracting leads. Marketers and sellers have always looked to devise unique ways to appeal and attract customers. However, in the modern day world of the technology-driven customer, traditional lead generation strategies may not provide the desired results. So marketers and sellers must go out of their way to find quality leads for their business. They must revamp their lead generation strategies to keep pace with the times.
In this article, I have highlighted the need for an effective lead generation strategy and put emphasis on its few compelling elements. While companies and businesses are continuously spending money to drive more traffic, there is a need for more effective ways to attract customers.
In a modern day world, the importance of a well-defined lead generation strategy plays a pivotal role in the development of a business. As the industry is progressing day by day, lead generation process have also revolutionised keeping pace with the time. Lead generation often uses digital channels, and has been experiencing significant changes in recent years from the rise of new online and social techniques. In particular, the richness of information readily available online has led to the rise of the "self-directed buyer" and the emergence of new techniques to develop and qualify potential leads before passing them to sales.
Read more here complete story
vucap.com.au/by-ind...
Financial Risk Management Consulting Firms
vucap.com.au/system...
It is a consultant job to find new and better way of doing things which can help businesses to improve their performance and grow by solving problems. Management consulting in Texas works with many firms in private sector as well as in public sector to help them in developing their services. It helps organisations to reduce costs and make savings. For More Info Please Visit Our Site :- http://hillindustries.com/management-consulting-in-Texas.html
The Importance of a Lead Generation Strategy
vucap.com.au/blog/t...
blog.iagility.com/5-no-c...
u/Theconsultant98
How to break into management consulting as fast as possible
I'm an 19 year old upper secondary school graduate from Finland with a university place in one of the most prestigious business school in Finland where I will start my studies next August.
As my major I will study finance and the plan would be to break into management consulting as fast as possible, work for a few years in the US in one of the Big 3 (management consultancies) after my bachelor's degree and get my master's degree from an reputable university in the US and continue my career in the US.
Does the reddit community have any advice for me to reach this goal?
Additional information, prior work experince: Telemarketing, summer 2015 and summer 2016 (sold lottery tickets B2C).
Field marketing, from the start of the summer 2017 to the end of the year (sold electricity contracts and did fundraising for an charity organisation B2C).
-2 months as promoter
-3 months as a team leader trainee
-2 months as a team leader
As a team leader trainee I was (obviously) trained to become an team leader at the same time as I ran my sales team and sold the products myself. When I became officially an team leader I basically did the same job which I did as a trainee just with an higher salary.
|
en
|
In 2015, Link ... a revamped approach to global news with a new " Mosaic " focused on Asia. Find the latest episodes, clips, and articles ... Democracy Now! Headlines-March 29, 2016 ... Center
U.S. Capitol Police ... Border Blaster William Onyeabor: A 'Fantastic' Man ... dared speak on-camera in Noisey's documentary "Fantastic Man ," he was never one to seek the limelight. He never did interviews, ... has also fed rumors that portray him as a bit of a strange man -- even a bully. Was he a filmmaker who studied film in Russia? Was his ... Earth Focus Blog ... people around the world. Read some of our most recent blog posts for a closer look at the topics covered in our video clips and ... Artbound Bob Baker: The Man Behind the Puppets ... for July 29, 2012 where its supporters hope to raise a $1 million to save the theater, as well as build a school and museum of ... the city's fabric as the puppets he's created. An affable man who still shows up to work most every day, Baker is an L.A. native who ... Artbound Sean Carlson: The Man Behind FYF Fest ... elements that you look to when picking bands? There is a million different things: "Is this going to work in a festival setting? Is ... Artbound CA 395: The High Road Home From Burning Man ... duo High & Dry list locations with art that Burning Man attendees can explore on their way home from the annual week-long event.
... Man ." These can be found on the Burning Man blog . She suggests: 1) Let yourself feel; 2) Write it out; 3) Go outside; 4) ... Artbound Documenting Exodus: Hit Man Gurung and Nepal's Departing Youth Nepalese artist Hit Man Gurung's residency at 18th Street Arts Center offers a unique perspective ... emigration has on the countries left behind. Artist Hit Man Gurung has traveled from Nepal for two month residency at the 18th Street ... the series 1,300 Contemporary Nepalese Portraits by Hit Man Gurung, 2013, mixed media. | Courtesy of the artist.
Because news from ... Mosaic Archive: Mosaic - World News from the Middle East (2001-2013) ... [scald=1512:kl_video_context {"additionalClasses":""}] MOSAIC World News from the Middle East February 21, 2003
|
en
|
Perhaps the most intuitive way to tone down a crop tops for high waisted jeans for school is to cover it up with your go-to sweater or jacket. If you’re not into layering, the easiest way to modestly wear a crop top is to pair it with a high-waisted pair of black or blue jeans.
Pairing a crop top with high-waisted jeans or shorts can give you confidence when it comes to showing off your tummy. Pants that pass your belly button will give you extra coverage. Choosing a flowy shirt will allow just a peep of skin to show, perfect for those who don’t want to bare it all.
However, crop tops are also important because their resurgence was encapsulated by women using crop tops to promote their sexual empowerment, such as Britney Spears or Clueless’s Cher. … Their choice to wear a crop top is simply about how the outfit makes them feel, as it should be.
crop tops aren’t only for teens! Crop tops can also be worn by women over 40 if they are worn the correct way. If you want to wear a top that’s shorter like this one, show only a sliver of the skin by pairing with high waisted denim! It’s as simple as that.
Crop Tops at 40? Absolutely!Wear high-waisted bottoms: I love to wear full high waisted skirts with crop tops. … Show just a peek of your waistline: I am comfortable with just an inch or so showing, and more in the front than the back. … Make sure it fits: Whatever you do, make sure what you are wearing both the top and bottom in your true size.
|
en
|
By Patrick Cavanaugh - May 23, 2019 06:12 pm EDT
In the world of disastrous marketing campaigns, few companies have seen such massive failure as Coca-Cola's promise of New Coke back in 1985. The company was the cola brand of choice for years, with a series of competitors putting pressure on the soft drink distributor to shake things up, ultimately deciding they would craft a new formula and reinvent themselves as "New Coke." The only drawback is that consumers didn't like the beverage, ultimately causing Coca-Cola to go back to their original formula in just a few months, which they then referred to as "Coca-Cola Classic." Despite being a punchline for three decades, fans are currently clamoring to buy New Coke in such massive numbers that the brand's website is crashing.
In honor of the upcoming third season of Stranger Things, which takes place during the summer when New Coke debuted, Coca-Cola launched a limited opportunity to purchase the throwback beverage to celebrate the launch of the new episodes. A similar marketing campaign took place with the release of Ghostbusters in 2016, with the Coca-Cola subsidiary Hi-C releasing Ecto Cooler, a tie-in beverage for The Real Ghostbusters animated series in 1987.
Coke's website has been so slammed with eager fans that the site is crashing, making it nearly impossible for fans to complete their purchases.
Scroll down to see fans venting their frustrations about not being able to purchase New Coke online and check out Season Three of Stranger Things on July 4th.
Slide 1 of 10Grief
Slide 2 of 10Not a Good Look
I keep hoping enough people give up and lay off the bandwidth so I can sneak in for #newcoke @CocaCola You need to make a statement, something. Silence in this day and age, even an hour in, is not a good look. #cokeisit
— Unusual Retail (@Unusual_Retail) May 23, 2019
Slide 3 of 10Meta Launch
#NewCoke launch having issues.... sounds a little too familiar... Accident? or the most meta launch plan ever? pic.twitter.com/pPWg6cKy3G
Slide 4 of 10See Ya
The New Coke website when it hit 5pm pic.twitter.com/rEDAXiK21w
— 🍰 (@QuinnsterX) May 23, 2019
Slide 5 of 10You Win
Ok @CocaCola...
It's been an hour of refreshing my cart to try and fill in delivery & payment details... You win. Keep ya #NewCoke. pic.twitter.com/OzTkhamA8O
— CoolNotCool (@YeahCoolNotCool) May 23, 2019
Slide 6 of 10A Fool
puh-lease give us an update!!! i'm looking like boo-boo the fool over here i've been refreshing the page since 4:50 #NewCoke pic.twitter.com/fsF5RuzEd4
— sam \\ 🦇 (@_Samgarciaa) May 23, 2019
Slide 7 of 10Website Fail
The New @CocaCola website looks awesome! 😐
So much for trying to do the
NEW Coke Stranger Things Promotional purchase
Website #Fail pic.twitter.com/qLBy0WZbzr
— ElevatedFilmFanatic (@RRR5280) May 23, 2019
Slide 8 of 10Time to Go
The Coca-Cola social team when their website servers crashed due to too many people trying to log on at the same time to buy #NewCoke: pic.twitter.com/FU4SC18V5f
— Sam Franco (@samjfranco) May 23, 2019
Slide 9 of 10eBay Crooks
Trying to buy some New Coke, and their website crashed the moment it went live. But never for the crooks who then sell it on EBay for Thousands of dollars #newcoke #sellitinstores @CocaCola
|
en
|
Needless to say, was one of 2019’s most anticipated moves, not just on the streaming titan, but over all.
Stephen Curry $74 million $30 million $44 million NBA 7.
Given our mutual commitment to training, this is a natural partnership, and ‘Protect This House.
If any portion of this Agreement is held invalid or unenforceable, that portion shall be construed in a manner consistent with applicable law to reflect, as nearly as possible, the original intention of the parties, and the remaining portions shall remain in full force and effect.
29 Chicago Bears at Green Bay Packers • Dec.
The biggest thing in these types of situations is the communication process has to be really clean and clear:
You will be required to enter your password for either an online or telephone payment;
NYSJ: NC: Our plan is to reach the influencers and get the product into the hands of the right people;
Rodolfo Pizarro 6;
The 62nd NBA All-Star Game will be played Feb.
Serena Williams, who was absent from the Top Ten Most-Searched Athletes, was No.
Roger Federer $106 million $6 million salary winnings $100 million endorsements Tennis 2.
Your Jaguars Account is your personal dashboard for tickets.
The Wizards will have the first shot at signing Bertans.
Most golfers don’t have the benefits of a caddy like the professionals, and it can be a long way around the course.
2020 Top-Selling MLS Jerseys 1.
But many men were still wearing raggedy clothes when they exercised, most likely that came from their college days.
Five-time Pro Bowler: DL Calais Campbell was named to his fifth overall and third consecutive Pro Bowl on Dec.
29 Chicago Bears at Green Bay Packers • Dec.
And I see that as being our strength as much as anything else because we didn’t come in with preconceived notions or with limitations as to where we could go and what custom jerseys could do.
Diego Chara 14.
6 Denver Broncos at Kansas City Chiefs • Dec.
Papa John’s, which also launched an alliance with the NFL, was one of 14 companies that were new to the list.
Adidas this week also activated overseas as the presenting partner of NBA London Live 2013, which will see the New York Knicks play the Detroit Pistons at The O2 on Jan.
Chris Wondolowski 20.
Kobe Bryant has 32, to rank third.
According to Ace Metrix, Brands that dominated the 2012 Summer Olympics in London have disappointed in the Sochi Games thus far.
Javier Hernandez 3.
Raul Ruidiaz 9.
Lucas Zelarayan 24.
In their respective commercials, we learn that Kristaps Porzingas wouldn’t use a carrier pigeon to keep in touch with his parents in Latvia, while Mike Trout wouldn’t use an outdated workout machine to be All-Star Mike Trout, and they wouldn’t drink an outdated sports drink, either.
4 • Super Bowl LIX TBD Feb.
Duce Staley has a lot of coaching to do, but he loves these kinds of challenges.
By sharing your personal information in these instances, you agree you’re your personal information may be used by the Rams and our co-branding partners.
They think they’re going to be very healthy for Washington on September 13.
Among the companies that have ended their alliances with Woods are PepsiCo’s Gatorade, Proctor & Gamble’s Gillette, AT&T and Accenture.
Carlo Vela 2.
Diego Rossi 18.
By using NHL Shop, you acknowledge that the applicable terms of use of NHL Shop also governs your use, including any merchandise orders you place with NHL Shop.
Roger Federer $106 million $6 million salary winnings $100 million endorsements Tennis 2.
Uthoff spent most of the season with the Memphis Hustle , where he appeared in 34 games and averaged 18 points, 10 rebounds, 1 steals and 1 custom football jerseys in 34 minutes.
Blaise Matuidi 10.
This entry was posted on Tuesday, January 26th, 2021 at 8:41 am and is filed under Uncategorized. You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.
|
en
|
Konstantino Blog Posts
Posts in Konstantino
10/20/2017 / In Jewelry and Konstantino
The Konstantino 18K Gold Diamond Swirl Ring is perfect for a woman's jewelry box, and would make a wonderful gift for a loved one or a special treat for yourself.
6/16/2017 / In Jewelry and Konstantino
Konstantino Men's Sparta Cross
When it comes to men's jewelry, there is no designer other than Konstantino who can embody both the figure and essence of masculinity at the same time. With the Sparta collection, Konstantino has created pieces that are bold in style yet subtle in taste.
4/21/2017 / In Jewelry and Konstantino
Konstantino Nemesis Petite Pendant
Suspended on a golden ring, the Konstantino Nemesis Petite Pendant is simple in concept but nonetheless pleasing to the senses. After all, the contrasting colors of its gold and sterling silver have been brought together to create the perfect backdrop for its gemstone centerpiece, which has been cut and polished in order to accentuate its natural brilliance.
|
en
|
The library has a search feature called "Search Everything". This is the default search on the library's homepage. Using this tool can be difficult and overwhelming because it searches nearly everything the library has access to, including items in the physical collection as well as resources in our databases.
|
en
|
How exactly to Write A first that is great message Bumble – ForumKredytowe.pl – kredyty hipoteczne, kalkulator kredytowy, experci kredytowi.
Today we intend to cover how exactly to compose a good message that is first Bumble. Regardless of how confident you're in true to life, there's always a trepidation that is little reaching out to somebody brand new. If you're perhaps not a normal communicator you must be cautious about how precisely you write that opening line. TechJunkie has arrived to support that.
What amount of times perhaps you have gotten a messaging in a dating app that said nothing but 'Hi' or 'Hey, exactly how are you currently? ' What happens then? You will probably sigh in disappointment and away swipe them to never be observed once again. If you're ready to make the very first move, you need to have it appropriate so that you can get noticed through the an incredible number of others making use of dating apps.
In Bumble, it's girls who result in the move that is first. It clearly resonates in this point in time because it's one of the most popular apps that are dating the whole world and growing fast.
Starting line. Which means you have now been swiping while having seen a adorable man whom appears as if he might be interesting.
He cannot contact you as that is maybe maybe not just what Bumble is approximately. So what now? Check out approaches which will help you compose a good very first message in Bumble to open up the entranceway to a possible love.
Don't be those types of. Guess what happens takes place when you obtain opening lines like this in other apps that are dating. The roll associated with optical eyes, the 'oh please' and also the goodbye swipe. Don't fall under that trap yourself. If you wish to simply take a moment to write your self along with your opener then simply take that moment.
Asking a witty or question that is genuinely interested a decent and usually appropriate opening line in dating. Ensure it is good one though. Concerns demonstrate have taken notice of the profile and are also thinking about something. After that it provides a chance when it comes to other individual to react in a real means they appear appropriate. After that you can judge if they're interested or perhaps not and get after that.
Internet dating apps will be the middleman to fulfilling brand new individuals and offer the way to find typical ground. There isn't any better method to accomplish this than with a concern.
Trigger an effect. Triggering a response just isn't easy but it right you become instantly memorable, for a while anyway if you get.
It may be a snort of laughter, a chortle, an exclamation of just how cool your remark had been or something like that very different. Simply just Take an extra to consider their profile to see just what types of effect he would most most likely enjoy and get from here.
This article if you're able to look at a profile and find something in there to be witty about, you don't need. If humor comes a tad bit more grudgingly then telling bull crap, building a comment or other witticism works every time. Guys are as vunerable to humor as women therefore operate it to your benefit.
It may be a joke that is bad 'Why couldn't the bike remain true by it self? It had been two tired. ' The lemon and lime laugh from above, or even a witty remark about their dog or buddies in just one of their photos.
Findings make a fantastic message that is first Bumble. It teaches you took the full time to read his profile alternatively of simply their pictures. It shows you're interested in him at significantly more than the beds base degree and might have ground that is common. It's a difficult one to pull of sometimes as not all profile has something in there you need to use however, if there clearly was, it is a good opener.
It could be a remark exactly how good the powder looks https://besthookupwebsites.net/sweet-pea-review/ in a skiing shot and asking if that is Colorado or afield that is further. You can ask just what breed his dog is and whether or not it plays well with newcomers. The idea is got by you.
Coming at something from an unusual angle won't suit everybody else but if it fits you, utilize it to your advantage. It may add many of these past tips from asking quirky concerns to making an observation that is unique. Just be sure that some body whoever brain doesn't work like yours will know very well what you're saying before you hit forward.
You can ask just how someone's Millennium was or just what a common hairstyle regarding the 1980s was, or who their favorite Muppet is. Better yet, just simply take one thing from a pic or their profile and there go from. Making someone think because of the message that is first be quite a good indicator on how the very first date is certainly going, so don't be bashful, be yourself!
It can take some time training to write a good message that is first Bumble. Like every thing in life, the greater amount of work you invest, the greater outcome you can get out. All the best with it!
|
en
|
title loans near me – Living Beyond Autism
Finance from third party financial institutions are supposed to supply short term relief for financial obligations and they're possibly likely http://www.maxloan.org/title-loans-ia maybe not meant as enduring monetary remedies.
Customers with account predicaments or wholl getting facing monetary commitment need to look for knowledgeable economical desire and overall credit score ranking advice. Individuals are motivated to master of the obstacles an item of applying for personal loans which are actually shorter-duration money possibilities which are a lot more attractive for economic desires and problem, and any local and standing procedures relevant to shorter-duration financial in an ailment. Most of us remarkably urge person to absolutely determine and testing any and all sorts of financial papers when you are absolutely accountable for abiding because relation to the mortgage acquire. Continue reading Payday advance finance online Slidell, LA.How to get a payday loan in Slidell, L. one.
Posted on September 23, 2021 September 23, 2021 Author lbadminCategories title loans near me
Using the internet mortgage software were acquiring traction as a result of services just like personalized payment schedules, marginal paperwork, low-interest charges, and fast disbursal. Before, the biggest challenges visitors confronted am accessing fast lending.
You needed to consult with a financial institution, acquire pertinent know-how, and offer collateral prior to getting a mortgage. The process was not merely monotonous also from the go of several group.
Because of the development of on the web funding apps, anyone can find a loan from the comfort of their homes. You may monitor the progress of your software easily.
Various financing apps in Nigeria now present a simple, simple and entirely electronic means to connection financing. Most of these loans is temporary along with interest levels range from software to app. Continue reading Rates of interest of some debt apps in Nigeria
Salary improve programs: What we should discover prior to deciding to down load
Numerous paycheck advance programs and solutions just let owners use handful of their envisaged profit, generally in return for a compact fee
Discover your very own bookmarks in separate superior section, under simple member profile
Commission move forward apps try to let owners acquire a modest amount of her expected earnings, normally in exchange for modest cost, and repay they on their next pay day.
It seems like a beautiful give if you require additional income between paychecks, and an incredible number of individuals bring recognized they. Although it's possible to utilize these software without hurting finances, some consumer recommends state they can create a cycle of credit.
If you're planning on utilizing a commission progress app, below's things to learn prior to deciding to grab.
CHARGE FRAMED while STRATEGIES
As soon as Jose Polanco uses the Earnin software to need from his own upcoming commission, the software requests him or her if he wants to keep a strategy.
The latest York class officer states the guy provides app $8 for the one hundred dollars he or she often borrows. According to him he's convinced by the communication the app https://autotitleloansplus.com displays that leaving a more impressive idea allow cover users just who can't afford to point at all.
Suggested secrets tend to be a common technique these applications reframe costs. While usually not requested, they're regularly urged.
Earnin CEO Ram Palaniappan claims techniques let the consumer determine what this service membership may be worth in their mind without calling for a charge they may not be able to get.
Some progress accompany additional charge. Dave another salary move forward app, enjoys three elective charges: a regular monthly $1 registration fee, an express cost to truly get your funds swifter and a tip.
For a few hundred us dollars — the most you may acquire from a lot of programs — the fees aren't as high as many cash loans or overdraft rates. Continue reading Salary improve programs: What we should discover prior to deciding to down load
|
en
|
Bloomsbury Publishing appoints ESco for Corporate Subscriptions Management
Following the move to ESco of Bloomsbury Publishing's corporate and academic subscriptions handling of several brands including Drama Online, Bloomsbury Collections, Bloomsbury Fashion Central and Bloomsbury Professional last July, ESco has opened up numerous opportunities and significantly improved their reporting and credit control.
"Since we have outsourced to ESco our procedures have become much more streamlined, which is a huge benefit to us and our customers. They are always responsive and willing to offer help regardless of the situation, everything is done quickly and efficiently. I have been very impressed with the level of service provided and would certainly recommend them to new customers." commented John Brennan their Customer Services Manager.
Please follow the links to find more about the Subscriptions Management and Corporate Subscriptions solutions ESco offer.
|
en
|
“Lack of a better hold room” is an interesting way of putting it. In order to keep Powers from mingling with guests at a Democratic fundraiser last Wednesday, Powers was escorted into a storage closet by a Biden staffer.
Yup a reporter kept in a storage closet isn’t big enough news for Morning Joe of Mika this morning, after all they know that the administration actually loves them and wants the best for them and as you can see by the apology they really mean it this time.
Meanwhile the media still ignores the Al Qaeda links to the people we are fighting a war engaging in a kinetic military action for.
Al-Qaeda’s offshoot in North Africa has snatched surface-to-air missiles from an arsenal in Libya during the civil strife there, Chad’s president said in an interview to be published Monday.
|
en
|
Motion Made Simple: Timeline Animation API
Learn how to use the Velo Timeline Animation API to create advanced & exciting animations
Timeline Animation API, a new Velo API, opens a whole new world of custom animations for Wix sites. With just a few lines of code, you can bring movement and life to your website.
The Timeline Animation API lets you create ongoing (constant movement) animations as well as user interaction animations. Moreover, you are no longer confined to the Editor "In animation" presets - you can create your own custom in-animations.
'Timeline' also allows you to compose advanced animations by synchronizing multiple animations with matched elements, control them, and precisely manage their timing and easing.
First, If you want to use Timeline Animation API on your site, open the Editor's 'Dev Mode' and add the following line before the 'onReady' function - import { timeline } from 'wix-animations'
import { timeline } from 'wix-animations'
Now you can write your animations using these four building blocks: Opacity, Rotate, Scale, & Position.
Opacity values range between 0-1. On 0 (opacity:0), the element on stage will be transparent. On 1 (opacity:1), the element will have no transparency.
Scale 1 (scale:1)reflects the element size on the Wix Editor stage. To double an element size, use a value of 2 (scale:2). To shrink the element by half, use a value of 0.5 (scale:0.5).
You can also control the X and Y axes, and can scale up each axis quite easily using (scaleX:1.5), for example.
To rotate an element, you need to give it a degree value in one of two ways:
Using number (rotate: 90) will be relative to your site's layout
Using string (rotate: '+=90') will be relative to where the last animation ended.
When you write your animation, you can choose between the two options.
When changing an element's position on your site, values represent a change in pixel unit.
Using number (x:20,y:40) will be relative to your site's layout
Using string (x:'+=20',y:'+=40') will be relative to where the last animation ended.
When you write your animation, you can choose between the two options above.
On the Hip Hop Venue Template, I created an on-going animation. By using x and y values, I defined my elements' position on stage. I also defined that the elements will move forever with {repeat: -1} and used the {yoyo:true} option to reverse the animation play for each successive repetition. To make the elements move naturally, I added 'easeInOutQuad'easing. In order to play all the animated elements together from the beginning of the 'Timeline', I added an offset value of 0.
timeline({repeat: -1, yoyo: true})
.add($w('#rainbow'), {y: 20, duration: 1900, easing: 'easeInOutQuad'})
.add($w('#yo'), {x: 70, duration: 1900, easing: 'easeInOutQuad'}, 0)
.add($w('#clouds'), {x: 20, duration: 1900, easing: 'easeInOutQuad'}, 0)
.add($w('#pizza'), {y: 20, duration: 1900, easing: 'easeInOutQuad'}, 0)
On the Interior Design Template, I created a user interaction animation.
First, I defined the animation for each image, then I added a play function on mouse-in and a reverse function on mouse-out. I created a 'hit area' with a transparent box that will define where the mouse should be, in order to play/reverse the animation.
import {timeline} from 'wix-animations'
animate = timeline()
.add($w('#greenImg'), {y:-150,x:-300,scale:0.5,duration:600,easing: 'easeInOutCirc'})
.add($w('#redImg'), {y: -300,x:200,scale:0.5,duration:600,easing: 'easeInOutCirc'}, 0)
.add($w('#blueImg3'), {y: 50, x:200,scale: 0.6, duration: 600, easing: 'easeInOutCirc'}, 0)
export function hitArea_mouseIn(event) {
export function hitArea_mouseOut(event) {
On the Designer's Blog & Forum Template, I created a custom in-animation. I had a specific vision for how the animation should behave, so I didn't choose animations from the Editor's in-animation panel, but rather wrote my own. To create my in-animation, I defined in the properties panel the image's state to be 'Hidden on load'. Then, I created my animation and named it 'wink'. I applied Wink to all the images on stage, giving them different starting times with offsets.
|
en
|
Solar wind | Gravity Wiki | FANDOM powered by Wikia
Stellar phenomena, Solar phenomena, Space plasmas,
For other uses, see Solar wind (disambiguation).
The solar wind is a stream of charged particles —a plasma—ejected from the upper atmosphere of the sun. It consists mostly of electrons and protons with energies of about 1 keV. These particles are able to escape the sun's gravity, in part because of the high temperature of the corona, but also because of high kinetic energy that particles gain through a process that is not well-understood at this time.
The concept of streams of particles flowing outward from the Sun was first suggested by British amateur astronomer Richard C. Carrington. In 1859, Carrington and Richard Hodgson independently made the first observation of what would later be called a solar flare. This is a sudden outburst of energy from the Sun's atmosphere. On the following day, a geomagnetic storm was observed, and Carrington suspected that there may be a connection. George Fitzgerald later suggested that matter was being regularly accelerated away from the Sun and was reaching the Earth after several days.[1]
The ideas of Fitzgerald and others was further developed by the Norwegian physicist Kristian Birkeland. His geomagnetic surveys showed that auroral activity was nearly permanent. As these displays and other geomagnetic activity were being produced by particles from the Sun, he concluded that the Earth was being continually bombarded by "rays of electric corpuscles emitted by the Sun".[1] In 1916, Birkeland was probably the first person to successfully predict that, "From a physical point of view it is most probable that solar rays are neither exclusively negative nor positive rays, but of both kinds". In other words, the solar wind consists of both negative electrons and positive ions.[2] Three years later in 1919, Frederick Lindemann also suggested that particles of both polarities, protons as well as electrons, come from the Sun.[3]
Around the 1930s, scientists had determined that the temperature of the solar corona must be a million degrees Celsius because of the way it stood out into space (as seen during total eclipses). Later spectroscopic work confirmed this extraordinary temperature. In the mid-1950s the British mathematician Sydney Chapman calculated the properties of a gas at such a temperature and determined it was such a superb conductor of heat that it must extend way out into space, beyond the orbit of Earth. Also in the 1950s, a German scientist named Ludwig Biermann became interested in the fact that no matter whether a comet is headed towards or away from the sun, its tail always points away from the Sun. Biermann postulated that this happens because the Sun emits a steady stream of particles that pushes the comet's tail away.[4]
Wilfried Schröder claims in his book, Who First Discovered the Solar Wind?, that the German astronomer Paul Ahnert was the first to relate solar wind to comet tail direction based on observations of the comet Whipple-Fedke (1942g).[5]
Eugene Parker realised that the heat flowing from the sun in Chapman's model and the comet tail blowing away from the sun in Biermann's hypothesis had to be the result of the same phenomenon, which he termed the "solar wind".[6][7] Parker showed that even though the sun's corona is strongly attracted by solar gravity, it is such a good conductor of heat that it is still very hot at large distances. Since gravity weakens as distance from the sun increases, the outer coronal atmosphere escapes supersonically into interstellar space. Furthermore, Parker was the first person to notice that the weakening effect of the gravity has the same effect on hydrodynamic flow as a de Laval nozzle: it incites a transition from subsonic to supersonic flow.[8]
In January 1959, the first ever direct observations and measurements of strength of the solar wind were made by the Soviet satellite Luna 1.[9] They were performed using scintillation counters and gaseous ionization detectors.[10] The discovery, made by Konstantin Gringauz was verified by Luna 2, Luna 3 and by the more distant measurements of Venera 1. Three years later its measurement was performed by Americans (Neugebauer and collaborators) using the Mariner 2 spacecraft.[11]
However, the acceleration of the fast wind is still not understood and cannot be fully explained by Parker's theory. The first numerical simulation of the solar wind in the solar corona including closed and open field lines was performed by Pneuman and Knopp in 1971. The magnetohydrodynamics equations in steady state were solved iteratively starting with an initial dipolar configuration.[12]
In 1990, the Ulysses probe was launched to study the solar wind from high solar latitudes. All prior observations had been made at or near the solar system's ecliptic plane.[13]
While early models of the solar wind used primarily thermal energy to accelerate the material, by the 1960s it was clear that thermal acceleration alone cannot account for the high speed of solar wind. An additional unknown acceleration mechanism is required, and likely relates to magnetic fields in the solar atmosphere.
The Sun's corona, or extended outer layer, is a region of plasma that is heated to over a million Celsius. As a result of thermal collisions, the particles within the inner corona have a range and distribution of speeds described by a Maxwellian distribution. The mean velocity of these particles is about 145 km/s, which is well below the solar escape velocity of 618 km/s. However, a few of the particles will achieve energies sufficient to reach the terminal velocity of 400 km/s, allowing them to feed the solar wind. At the same temperature, electrons, due to their much smaller mass, obtain escape velocity and build up an electric field which tends to further accelerate ions - charged atoms - away from the Sun. [14]
The total number of particles carried away from the Sun by the solar wind is about 1.3×1031 per second.[15] Thus, the total mass loss each year is about (2–3)×10-14 solar masses,[16] or 6.7 billion tons per hour. This is equivalent to losing a mass equal to the Earth every 150 million years.[17] However, only about 0.01% of the Sun's total mass has been lost through the solar wind.[18] Other stars have much stronger stellar winds that result in significantly higher mass loss rates.
The solar wind is divided into two components, respectively termed the slow solar wind and the fast solar wind. The slow solar wind has a velocity of about 400 km/s, a temperature of 1.4–1.6×106 K and a composition that is a close match to the corona. By contrast, the fast solar wind has a typical velocity of 750 km/s, a temperature of 8×105 K and it nearly matches the composition of the Sun's photosphere.[19] The slow solar wind is twice as dense and more variable in intensity than the fast solar wind. The slow wind also has a more complex structure, with turbulent regions and large-scale structures.[20][15]
The slow solar wind appears to originate from a region around the Sun's equatorial belt that is known as the "streamer belt". Coronal streamers extend outward from this region, carrying plasma from the interior along closed magnetic loops.[21][22] Observations of the Sun between 1996 and 2001 showed that emission of the slow solar wind occurred between latitudes of 30–35° around the equator during the solar minimum (the period of lowest solar activity), then expanded toward the poles as the minimum waned. By the time of the solar maximum, the poles were also emitting a slow solar wind.[23]
Both the fast and slow solar wind can be interrupted by large, fast-moving bursts of plasma called interplanetary coronal mass ejections, or ICMEs. ICMEs are the interplanetary manifestation of solar coronal mass ejections, which are caused by release of magnetic energy at the sun. ICMEs are often called "solar storms" or "space storms" in the popular media. They are sometimes, but not always, associated with solar flares, which are another manifestation of magnetic energy release at the Sun. ICMEs cause shock waves in the thin plasma of the heliosphere, launching electromagnetic waves and accelerating particles (mostly protons and electrons) to form showers of ionizing radiation that precede the ICME.
When an ICME impacts the Earth's magnetosphere, it temporarily deforms the Earth's magnetic field, changing the direction of compass needles and inducing large electrical ground currents in Earth itself; this is called a geomagnetic storm and it is a global phenomenon. ICME impacts can induce magnetic reconnection in Earth's magnetotail (the midnight side of the magnetosphere); this launches protons and electrons downward toward Earth's atmosphere, where they form the aurora.
ICMEs are not the only cause of space weather. Different patches on the Sun are known to give rise to slightly different speeds and densities of wind depending on local conditions. In isolation, each of these different wind streams would form a spiral with a slightly different angle, with fast-moving streams moving out more directly and slow-moving streams wrapping more around the sun. Faster-moving streams tend to overtake slower streams that originate westward of them on the sun, forming turbulent co-rotating interaction regions that give rise to wave motions and accelerated particles, and that affect Earth's magnetosphere in the same way as, but more gently than, ICMEs.
Effect on the Solar System Edit
Over the lifetime of the Sun, the surface rotation rate has decreased significantly. This loss of rotation is thought to have been caused by interaction of the Sun's surface layers with the escaping solar wind.[26]
As the solar wind approaches a planet that has a well-developed magnetic field (such as Earth, Jupiter and Saturn), the particles are deflected by the Lorentz force. This region, known as the magnetosphere, causes the particles to travel around the planet rather than bombarding the atmosphere or surface. The magnetosphere is roughly shaped like a hemisphere on the side facing the Sun, then is drawn out in a long wake on the opposite side. The boundary of this region is called the magnetopause, and some of the particles are able to penetrate the magnetosphere through this region by partial reconnection of the magnetic field lines.[27]
The solar wind is responsible for the overall shape of Earth's magnetosphere, and fluctuations in its speed, density, direction, and entrained magnetic field strongly affect Earth's local space environment. For example, the levels of ionizing radiation and radio interference can vary by factors of hundreds to thousands; and the shape and location of the magnetopause and bow shock wave upstream of it can change by several Earth radii, exposing geosynchronous satellites to the direct solar wind. These phenomena are collectively called space weather.
Planetary surfaces Edit
Mercury, the nearest planet to the Sun, bears the full brunt of the solar wind, and its atmosphere is vestigial and transient, its surface bathed in radiation.
The Earth's Moon has no atmosphere or intrinsic magnetic field, and consequently its surface is bombarded with the full solar wind. The Project Apollo missions deployed passive aluminum collectors in an attempt to sample the solar wind, and lunar soil returned for study confirmed that the lunar regolith is enriched in atomic nuclei deposited from the solar wind. There has been speculation that these elements may prove to be useful resources for future lunar colonies.
The solar wind "blows a bubble" in the interstellar medium (the rarefied hydrogen and helium gas that permeates the galaxy). The point where the solar wind's strength is no longer great enough to push back the interstellar medium is known as the heliopause, and is often considered to be the outer "border" of the solar system. The distance to the heliopause is not precisely known, and probably varies widely depending on the current velocity of the solar wind and the local density of the interstellar medium, but it is known to lie far outside the orbit of Pluto. Scientists hope to gain more perspective on the heliopause from data acquired through the Interstellar Boundary Explorer (IBEX) mission, launched in October 2008.
Magnetic sail[30]
Solar sail[30]
↑ 1.0 1.1 Meyer-Vernet, Nicole (2007). Basics of the Solar Wind, Cambridge University Press. ISBN 0521814200.
↑ Ludwig Biermann (1951). "Kometenschweife und solare Korpuskularstrahlung". Zeitschrift für Astrophysik 29: 274.
↑ Schröder, Wilfried (2008). Who First Discovered the Solar Wind?. Germany: Darmstadt. OCLC 232645128.
↑ Christopher T. Russell. "THE SOLAR WIND AND MAGNETOSPHERIC DYNAMICS". Institute of Geophysics and Planetary Physics University of California, Los Angeles. Retrieved on 2007-02-07.
↑ Roach, John (August 27, 2003). "Astrophysicist Recognized for Discovery of Solar Wind", National Geographic News. Retrieved on 13 June 2006.
↑ Eugene Parker (1958). "Dynamics of the Interplanetary Gas and Magnetic Fields". The Astrophysical Journal 128: 664. doi:10.1086/146579, http://articles.adsabs.harvard.edu/cgi-bin/nph-iarticle_query?1958ApJ...128..664P.
↑ "Luna 1". NASA National Space Science Data Center. Retrieved on 2007-08-04.
↑ Template:Ru icon 40th Anniversary of the Space Era in the Nuclear Physics Scientific Research Institute of the Moscow State University, contains the graph showing particle detection by Luna 1 at various altitudes.
↑ M. Neugebauer and C. W. Snyder (1962). "Solar Plasma Experiment". Science 138: 1095–1097. doi:10.1126/science.138.3545.1095-a.
↑ G. W. Pneuman and R. A. Kopp (1971). "Gas-magnetic field interactions in the solar corona". Solar Physics 18: 258. doi:10.1007/BF00145940.
↑ Encrenaz, Thérèse; Bibring, J.-P.; Blanc, M. (2003). The Solar System, Springer. ISBN 3540002413.
↑ 15.0 15.1 Kallenrode, May-Britt (2004). Space Physics: An Introduction to Plasmas and, Springer. ISBN 3540206175.
↑ Carroll, Bradley W.; Ostlie, Dale A. (1995). An Introduction to Modern Astrophysics (revised 2nd edition ed.), Benjamin Cummings. ISBN 0201547309. —p. 409
↑ Schrijver, Carolus J.; Zwaan, Cornelis (2000). Solar and stellar magnetic activity, Cambridge University Press. ISBN 0521582865.
↑ Meyer-Vernet, Nicole (2007). Basics of the Solar Wind, Cambridge University Press. ISBN 0521814200.
↑ Feldman, U.; Landi, E.; Schwadron, N. A. (2005). "On the sources of fast and slow solar wind". Journal of Geophysical Research 110: A07109.1–A07109.12. doi:10.1029/2004JA010918.
↑ Suess, Steve (June 3, 1999). "Overview and Current Knowledge of the Solar Wind and the Corona". The Solar Probe. NASA/Marshall Space Flight Center. Retrieved on 2008-05-07.
↑ Lang, Kenneth R. (2000). The Sun from Space, Springer. ISBN 3540669442.
↑ Harra, Louise; Milligan, Ryan; Fleck, Bernhard (April 2, 2008). "Hinode: source of the slow solar wind and superhot flares". ESA. Retrieved on 2008-05-07.
↑ Bzowski, M.; Mäkinen, T.; Kyrölä, E.; Summanen, T.; Quémerais, E. (2003). "Latitudinal structure and north-south asymmetry of the solar wind from Lyman-α remote sensing by SWAN". Astronomy & Astrophysics 408: 1165–1177. doi:10.1051/0004-6361:20031022.
↑ Hassler, Donald M.; Dammasch, Ingolf E.; Lemaire, Philippe; Brekke, Pål; Curdt, Werner; Mason, Helen E.; Vial, Jean-Claude; Wilhelm, Klaus (1999). "Solar Wind Outflow and the Chromospheric Magnetic Network". Science 283 (5403): 810–813. doi:10.1126/science.283.5403.810. PMID 9933156.
↑ Marsch, Eckart; Tu, Chuanyi (April 22, 2005). "Solar Wind Origin in Coronal Funnels". ESA. Retrieved on 2008-05-06.
↑ Endal, A. S.; Sofia, S. (1981). "Rotation in solar-type stars. I - Evolutionary models for the spin-down of the sun". Astrophysical Journal, Part 1 243: 625–640. doi:10.1086/158628, http://adsabs.harvard.edu/abs/1981ApJ...243..625E. Retrieved on 5 May 2008.
↑ Grünwaldt H et al. (1997). "Venus tail ray observation near Earth.". Geophysical Research Letters 24 (10): 163–1166. doi:10.1029/97GL01159, http://scholar.google.com/scholar?num=100&hl=en&lr=&safe=active&cluster=13741676747552292586.
↑ 30.0 30.1 Magnetic sails are propelled almost entirely due to the force of the solar wind. Solar sails are propelled almost entirely due to the force of the sun's EM radiation, not the solar wind.
|
en
|
Joel Babcock is a massage therapist and the author of "The Massage Chair Bible." He is a frequent contributor to health and wellness publications and has been featured on national TV and radio programs.
|
en
|
NCBA CLUSA is deeply saddened to confirm that 18 of its project staff members, and three others, totaling 21 people, have died as a result of yesterday’s [December 18, 2018] bus accident in Ugand
From its humble beginnings in the early 80’s, the Dublin Food Co-op has blossomed into Ireland’s flagship wh
Stephanie Shaw believes that if her life circumstances were a little different, she might be a frequent visitor to Missouri Southern State University's new food pantry.
How many comedians does it take to battle Louisville’s food deserts by raising money for a new food co-op? Never enough, but seven will do this time.
Ticonderogo Natural Foods Co-op turned to architect Joseph Vilardo when it was preparing its decorative Christmas entry for the annual holiday show at th
The Marquette Food Co-Op celebrated Co-Op month with their very own version of the classic game show, Supermarket Sweep.
Each year, graduate students in SOU’s environmental education program design and implement Fall in the Field, a place-based environmental education program.
|
en
|
transcranial electromagnetic treatment News Research Tags Articles - Neuroscience News
transcranial electromagnetic treatment
A new, non-invasive brain stimulation treatment shows promise in enhancing memories and cognitive function in those with Alzheimer's disease. Transcranial electromagnetic treatment (TEMT) increases functional connectivity within the cingulate cortex. TEMT is also able to penetrate the brain to break up amyloid-beta and tau deposits, slowing the progression of Alzheimer's disease.
|
en
|
Big Ten announces first Player and Freshman of the Week honors | The Catch and Shoot
Big Ten announces first Player and Freshman of the Week honors
Photo: Leon Haiip | Getty Images
It's only a few days into the college basketball season, but after opening weekend the Big Ten announced its first Player of the Week and Freshman of the Week.
Michigan State guard Travis Trice took home Player of the Week honors for the first time. The senior posted a career-high 25 points along with five rebounds as five assists as the Spartans defeated Navy, 64-59. He played turnover-free and shot 5-for-6 from beyond the arc.
Purdue forward Vince Edwards earned Freshman of the Week after impressing twice in the opening weekend. Edwards recorded 13 points and eight rebounds in his debut against Samford. He followed that with 26 points, eight boards and three blocks against IUPUI.
Posted in Big TenTagged Awards, Big Ten, Boilermakers, Featured, Freshman of the Week, Michigan State, Player of the Week, Purdue, Spartans, Travis Trice, Vince Edwards
|
en
|
Pakistan Indicts 7 for 2008 Mumbai Attacks - TalkLeft: The Politics Of Crime
Pakistan Indicts 7 for 2008 Mumbai Attacks
By Jeralyn, Section Foreign Affairs
Posted on Wed Nov 25, 2009 at 03:29:58 PM EST
Tags: Mumbai Attacks, LeT (all tags)
Pakistan has indicted seven members of Lashkar-e-Taiba (LeT) for the 2008 Mumbai attacks.
The seven, all in custody, are: Zakiur Rehman Lakhvi, the "mastermind" of the attacks; Abdul Wajid alias Zarar Shah, also of the LeT and described as a "facilitator and expert of computer networks;" Hamad Amin Sadiq, who is charged with "facilitating funds and hideouts" for the Mumbai attackers; Mazhar Iqbal alias Abu al Qama, described as a "handler;" Shahid Jamil Riaz, who is described both as a facilitator for funds, as well as a crew member of a boat used by the attackers; Jamil Ahmed, described as "facilitator;" and, Younus, also a "facilitator."
All have pleaded not guilty. The seven include the two alleged masterminds of the attacks, Zaki-ur-Rehman Lakhvi and Zarrar Shah. The Court refused to indict LeT leader Hafiz Saeed. [More...]
According to the Islamabad government, India has not provided evidence that Saeed was directly involved in the Mumbai attack.
The AP report is here.
The group has come under renewed focus since it was linked to a U.S. terrorism investigation following last month's arrests of David Coleman Headley, 49, and Tahawwur Hussain Rana, 48, in Chicago. Lashkar-e-Taiba has denied any link to the two men.
The two men are accused of plotting with two unidentified Lashkar-e-Taiba associates, including a senior operative, and Pakistan-based al-Qaida commander Ilyas Kashmiri to kill an editor and a cartoonist at Danish paper Jyllands-Posten.
India Prime Minister Manmohan Singh said today the planner of the 11/26 attacks is still free in Pakistan.
< Roman Polanski Granted Bail | Feds Dismiss Money Laundering Case Against Miami Lawyer >
Pakistan Indicts 7 for 2008 Mumbai Attacks | 6 comments (6 topical)
Excellent timeing, as the Indian newspapers (5.00 / 1) (#1)
by oculus on Wed Nov 25, 2009 at 03:53:14 PM EST
are full news of this impending anniversary.
I just watched the HBO special (none / 0) (#2)
by Militarytracy on Wed Nov 25, 2009 at 04:03:44 PM EST
with Fareed Zakaria, God it was so chilling. Once they traced the VOIP they recorded the conversations between the shooters and their bosses in Pakistan. I just gave myself goosebumps thinking about it. The one shooter taken alive.....he was just a kid, and when he was laying there wounded answering questions and saying that his leaders told him they had done such things, it was heart breaking to me. Once again, his frontal lobes haven't exactly come in have they? His leaders have never placed themselves in such danger and death either, they only use those they find that they can use. The accounts of what that particular shooter did were so chilling too at the same time.
Somewhere I read recently one of the (none / 0) (#3)
by oculus on Wed Nov 25, 2009 at 04:53:12 PM EST
gunmen was so sturnned by the big screen TV in the hotel he had to be told to go back to the work of shooring by the folks in Pakistan.
That conversation is in (none / 0) (#5)
by Militarytracy on Wed Nov 25, 2009 at 06:53:45 PM EST
the documentary, the kid was amazed at what he was seeing and the leader on the other end of the phone call telling him he just needed to shoot people and he was losing his focus or something like that. They also told these kids that when you die for Jihad that your face glows golden, something like that. They showed the surviving shooter the faces of the dead others, nobody's face was glowing golden and some of them had horrific expressions on them and perhaps looked like they were even somehow burned. In the video that they had of the boys at different Mumbai locations before the attacks began, it also looked like some of them were shoeless.
|
en
|
provigil 30cpr 100mg desyrel street value can i take meclizine and phenergan provigil comprar españa is phenergan or zofran stronger
IIT Kharagpur Vacancies 2017–Hello and a very good Morning to all my dear readers,Viewers as well as Readers.Thank you all from the bottom of my heart for visiting our official website www.freejobaware.com.we are constantly updating our website for making it more informative for our readers and users.Thank you all for all the love,support as well as appreciation that you all have showered upon me as well as on my team.Now here comes a notification about IIT Kharagpur Vacancies 2017.An ad Notification is being published by the IIT Kharagpur for the post of Project Officer.So the candidates those who are interested as well as eligible enough they can appear for interview on the given date which is 7 May 2017.The applicants should check the deadline for the submission of application form, that is given in this article Further details are given below.candidates should go through the article and applicants should also keep visiting our website frequently for more information.and all the deserving and eligible candidates should go through the complete article for all the necessary information.
IIT Kharagpur Vacancies 2017
IIT Kharagpur Vacancies 2017,Vacancy Details
Job Location – Kharagpur,India
IIT Kharagpur Vacancies 2017,Eligibility Criteria
Age Limit – Candidate;s maximum age limit must be 45 years
Educational Qualification –Candidates those who are going to apply for these sort of jobs they must Posses B.Tech or M.Tech in computer science from an affiliated university or college
Application Fee – Rs 50 payable via demand draft drawn in the favour of IIT Kharagpur payable at Kharagpur
|
en
|
AMAZING!!! These pictures are insane -- especially the one with the landslide area. I can't even imagine a place so incredibly gorgeous, but you've done a wonderful job capturing it for those of us who might never see it. Thank you!!
Thanks, Katie! I have to be honest when we got back and I started looking through the photos I was disappointed. It's just so hard to capture the magnitude of such mountains. I needed to have taken a wide angle :)
You are right!!! I'm so glad I didn't know about the landslide, geez it gave me the jitters just looking at it. The photographs are outstanding and your descriptions are too. Nice summary for us watching through your eyes! Much love
Dear Birthday Girl, Thanks so very much for showing us these parts of your journey -- it's all overwhelming -- we take it in and feel so grateful that you so generously share your treks with the rest of us. Sending you LOVE with these thanks.
Great photos!! The mountains are just beautiful. I can hear you screaming into the vastness, and the look on Ashlie's face as she was washing something in the sink was priceless. Great job of capturing the moments for us. Love you
On the washing note - can you imagine living in the mountains with a family and having to hand wash all those filthy clothes? I'd see women at the taps with piles! Ugh.
Im glad you have shared your pictures on this leg of your journey. Seriously, I definately could not have done it myself!!
Love the pictures.....they are amazing! Thanks so much for sharing them :-) I agree with Judi......I am glad I did not know about the landslide area until you were finished. I think my favorite photo is the one of the two of you sitting on rocks at Thorong La Pass.....you two are so adorable and full of LIFE!!!! Love y'all!!!
Ooh I've been looking forward to more photos from your trek - you guys always take the most incredible shots. These were all spectacular!
Thank you for sharing your adventure. I enjoyed the adventure as seen through you eyes. A vicarious adventure is better than none.
That is an amazing album. Feeling I get now, while still sitting at the computer, is between quit everything pack bags and head for Nepal (right now) and cool now I don't have to go to Nepal since I been there already (trough you).
LOVE the photos!! Trying to go through mine to figure out which to edit... Loved seeing and recognizing places. Looks like the lake was worth it! Glad we met you guys! Good luck with your future travel!
Thanks, Rosie. I took so many that editing through was a big chore. I was scared to death going to that lake, not even joking. But yes, it was worth it. Nice to have crossed your path too. Maybe we'll bump into each other again somewhere?
Jaipur, Nov 29 (IANS) The special session of the Rajasthan assembly, called on the 70th year of the adoption of the Constitution, witnessed many interesting scenes on Friday: Congress Chief Minister Ashok Gehlot spoke ‘modi hai to mumkin hai’ several times in the Assembly as he took a dig at PM’s style of functioning.
BJP MLA Ashok Lahoti, speaking at the entrance of the Assembly, said he was thankful to the CM for “chanting Prime Minister Narendra Modi’s name 46 times” and repeating “Modi hai to mumkin hai for 26 times”.
|
en
|
The Hospes Palacio de Arenales & Spa Hotel is a 5-star hotel located just 10 minutes outside of the historic town of Cáceres, a UNESCO World Heritage Site. Housed in a building from the 17th C., the hotel once served as the summer residence of the Golfín family, an important aristocratic family that hosted the Catholic Monarchs in their 15th C. palace in the city center during their visits to Cáceres.
Set in a peaceful location just outside of town and surrounded by hundreds of olive trees with 81 stork nests, the Palacio de Arenales is a tranquil oasis where guests can relax and enjoy treatments at the spa, and explore the beauty of Cáceres and the other historical towns in the Extremadura region, including Trujillo, Plasencia and Mérida.
The hotel has 46 rooms decorated in a modern decor, all with exterior views. The rooms are equipped with air conditioning, free WiFi, hair dryer, LCD TV and room safe. Dreamer and Deluxe rooms range in size from 20 m2 to 40 m2, and suites (Junior Suite, Suite and Presidential Suite) range in size from 40 m2 to 80 m2. Dreamer rooms have a maximum capacity of 2, some Deluxe rooms and Junior Suites can accommodate up to 3, and other suites can accommodate up to 4. The hotel also has an outdoor pool, health club, sauna, and outdoor parking.
Las Corchuelas Restaurant serves traditional cuisine from Extremadura. There is also a Bar/Lounge, and a bar on the summer terrace that serves tapas, beverages and light snacks.
Fátima attracts millions of pilgrims and tourists each year, as it is considered one of the most important Catholic shrines in the world dedicated to the Virgin Mary. Located about an hour and a half north of Lisbon, it is a popular day trip for visitors.
The Sanctuary of Our Lady of Fátima is built at the site of the apparitions of the Virgin Mary to three shepherd children in 1916. It was consecrated in 1953, and today it welcomes about 4 million pilgrims each year. The Sanctuary is comprised of a number of buildings, including the Basilica of Our Lady of the Rosary and the Chapel of Apparitions, which is built on the site that the Virgin Mary instructed the children to build the chapel. The chapel houses the tombs of the children, Lúcia, Jacinta and Francisco.
Your guide/driver will pick you up at your hotel to begin your 8 hour private tour. A suggested itinerary for the tour includes the following visits:
The private tour can be customized to meet your specific interests. There will be time during the day to have lunch.
Visitors to Porto looking to venture outside of the city to explore some historic towns need to look no further than the neighboring Centro Region of Portugal. The region is steeped in history and within a 2 hour drive from Porto you can visit one of the most popular pilgrimage sites in the world, and the city that was Portugal’s first capital.
On this 9 hour private tour you will visit the towns of Fátima and Coimbra. Over 4 million people visit Fátima each year. It is believed that the Virgin Mary appeared to 3 shepherd children near the town on the 13th of every month from May through October 1917. The Sanctuary of Our Lady of Fátima was built at the site of the apparitions of the Virgin to the children, and their tombs are located in the basilica.
Coimbra’s historical roots date back to Roman times. It has played an important part in Portugal’s history over the centuries, and even served at the country’s first capital from 1131-1255. It is perhaps best known for its university, which is the oldest in the country and one of the oldest universities in the world.
Your guide/driver will pick you up at your hotel to begin your private tour. A suggested itinerary for the tour includes the following stops/visits:
The tour can be customized to meet your specific interests. You will have time during the day to stop for lunch.
Nobody seems to keep New Year resolutions. I made mine very simple this year: Be More Righteous. It is easy to remember and something I can take action on as the year goes on. When I do something I can say, “Is this the right thing to do?” That should help keep me straight.
Make sure it has all the holidays and major events on it. Why? You may want to market certain days and events. I have a gift site so I try to cover all major gifting events and holidays.
Don’t worry about the actual day of the week. Do the most important thing first. Keep plugging along until you have completed each task during the week specified.
Sporting events like the Super Bowl, the opening day of fishing, camping season, winter sports, etc. Stay on top of these selling opportunities.
|
en
|
Solar Community, a solar contractor based out of Austin, Texas, was founded in 2007 and has grown to 35 employees. Solar Community has installed 5 megawatts of solar capacity. In 2011, it installed 3 MW.
Web Designing involves planning and conceptualizing content online. It not only includes aesthetics but functionality too. Designing the website means enhancing the look while improving its functionality. A captivating web design is essential to portray your ideas. A website should rank high in terms of usability and accessibility. New Jersey website design services have an edge over others. You will find many skilled and competent designers here.
Whether your objective is to create brand awareness or market a product, effective designing can be a game-changer. A good website should be easy to use and free from unnecessary information. Graphic designers and content writers should coordinate with each other for optimal output. The color scheme should neither be too bright nor too dull. It should be in alignment with your brand logo or theme and the message you intend to deliver.
Creating a website that is optimal for mobile-phone users is a must. Most people nowadays depend on their phones for everything. Hence, it is vital to create a cell phone optimized website. You should take a look at how your website appears on a mobile phone to improve the user experience. If it doesn’t appear mobile-friendly, you can easily create one using website builders.
The more options you give to the users, the more overwhelmed they’ll feel and will end up selecting nothing. Users visit a website for a specific purpose. Eye-catchy layouts will appear to lure the attention of your audience. But you shouldn’t overdo it. Otherwise, it will create an unnecessary distraction.
Check your website for any unnecessary information. Keep the design simple and elegant with content that is short and up to the mark. There should be enough white spaces which are left blank on purpose so that the website doesn’t appear to be cluttered. This helps the users to easily navigate through it and reach the information that they actually intended to read.
Pictures speak more than words. When placed strategically, they can give the users an overview of the site and guide them to where they wish to reach. High-resolution images should be used. The images should also align with the overall theme of your website. The use of infographics is also an ideal method to grab the attention of the users and offer information effectively.
A visually appealing website with an ineffective user experience is pointless. It is essential to keep the needs and requirements of users in mind while designing a website. Some of the important aspects include clickable buttons and a sensible page hierarchy. As soon as the user reaches your website, he/she should be able to take the desired action. Users don’t like to go through unnecessary and pointless information before reaching the desired page.
If your site takes a lot of time to load, you might lose some of your valuable customers. Ideally, it shouldn’t take more than three seconds to load. In this fast-moving world, no one has the patience or time to wait for a long time. One method to decrease your load time is to reduce or optimize the image size. No matter what device a person is using, if it takes longer, they’ll abandon your site and move on to some other site.
Content on a website must flow smoothly in an understandable manner. The left corner at the top is the first area that grabs the user’s attention. Hence, this area should be used to put the most important information. The least important content can be placed in the right-side corner at the bottom.
A website should maintain consistency in fonts, color schemes, picture style, etc. Every element must work in perfect harmony to give an optimal look to the website. If there is a lack of consistency, users might lose interest quickly, and the website might not appear appealing and systematic. Some pages might have a little different layout, but there must be some connective elements.
If you wish to have a significant digital presence, connect with Net Wave Interactive for the best web designing solutions. Based in New Jersey, web design is their forte. They follow a holistic approach to curating an ideal site for you. It is worth investing in their web designing services. They can efficiently handle any glitches or issues that might arise. They try and learn as much as possible about you and your business and then start working on building the desired site. The team keeps in touch with you consistently and keeps you updated with everything. Contact them to schedule a complete website design.
Dentures are a type of prosthetic teeth recommended when you need to replace multiple teeth. Dentures work to restore your oral function and smile, improving your ability to properly speak and eat, supporting your facial volume and enhancing your overall appearance. Dentures are custom made to fit your mouth comfortably and provide an aesthetically pleasing final result.
Partial Dentures — A partial denture is used when some healthy teeth remain and includes a thin framework or clasps that attach to your natural teeth to ensure a secure fit.
While dentures are traditionally removable, our dentist may recommend anchoring them in place with implants. We will review all your options with you during your consultation to help you make an informed decision regarding your dentures.
It will take several appointments to complete your dentures and ensure that they fit properly. After you have received your dentures, our dentist will also provide you with instruction on caring for your appliance so that you can keep it in good condition. We will also check your dentures at each of your regular dental visits to ensure that they fit and function properly and determine if any maintenance is needed.
The FA's Knowledge base is a useful platform to find the answers you need to find on a wide range of topics such as:
Please note that our staff continue to work remotely and some are still partially under the furlough scheme, working reduced hours.
Below you can find the email addresses and phone numbers of our staff. Email is the best way to communicate with us for queries that are not urgent.
In the case of contacting us by phone, please leave a message if your call is unable to be answered and the member of staff will return your call at their earliest opportunity.
We all know lavender essential oil for its power to soothe our shattered nerves, and gently lull us into a calming sleep. But did you know that part of its multipurpose magic is how much it can help your skin?
Lavender essential oil boasts powerful anti-inflammatory, antimicrobial, antioxidant and antibacterial properties that together offer more benefits for your skin than you realize.
|
en
|
Always exercise affect health. CDS disease works to reduce these four risk factors: tobacco use, poor nutrition, lack of physical activity,...
|
en
|
The New One was considered by many to be an unlucky loser when finishing a staying on third to Jezki last year after getting badly hampered by the fall of the ill-fated Our Conor, and may well prove the biggest danger to Jezki.
The Nigel Twiston-Davies trained seven-year-old is unbeaten in five starts since and has looked better than ever this season.
The son of King’s Theatre was particularly impressive when landing the International Hurdle at this track and although he struggled to land the odds in his final prep run at Haydock the ground was desperate and hindered his jumping.
In hindsight the latter was not a bad a performance as it first appeared, and The New One is far better than that and remains the home team’s big hope in this big race on day one of the Festival.
There will be expert analysis and offers aplenty when Coral stage their Cheltenham Festival Preview night on Sunday – and it’s all FREE via live streaming for customers.
Last year’s event attracted an audience of over 16,000 and Coral’s PR Director Simon Clare will be joined by Racing UK and Channel 4 racing presenter Nick Luck and his colleague Mark ‘The Couch’ Winstanley.
Clare, who is riding Lexington Bay in the St Patrick’s Day Derby Charity race at the Festival to raise money for the Injured Jockeys’ Fund, said: “Last year’s live streamed show was a great success and we’ve had a number of customers ask if we’ll be repeating it this year.
“In this day and age, many racing fans will find it far easier to tune in for free to our Cheltenham Festival preview from the comfort of their own home using their mobile phone or laptop, rather than travelling to a venue and then paying for the privilege.”
|
en
|
Bar/fly: Ho Chi Minh City - NZ Herald
5 Jul, 2015 11:48am 6 minutes to read
7 Jul, 2015 9:30am 3 minutes to read
There's plenty of local flavour in the beers at Pasteur Street Brewing. Illustration / Rod Emmerson
Ho Chi Minh City has a great craft ale scene, says Vietnam beer vet Brett Atkinson.
Back in the mid-90s, finding a beer in the emerging destination of Vietnam was pretty straightforward. Just ask for a "333" ("Ba Ba Ba") and if you were lucky, your street-food friendly lager might even be slightly chilled.
Fast forward two decades and my 2013 adventures in Hanoi were anchored in the city's bia hoi scene, combining super cheap "fresh beer" (brewed daily and selling for around 50 cents) with the joys of dried squid, roast duck and sitting awkwardly on a tiny blue kiddie chair. Factor in regular choruses of "Mot tram phan tram!" ("One hundred per cent!") - the local challenge to drain one's glass - and no one could call Vietnam's beer scene sophisticated.
Now, another two years later, I'm sitting in a Vietnamese craft brewery discussing Belgian brews and Berlin-style sour beers with an American brewer recently arrived from Colorado's Upslope Brewing Company.
Wearing the international craft brewer's uniform of a trucker's cap, jeans and plaid shirt, Alex Violette is a laid-back guide to the tasting flight of six of Pasteur Street Brewing's beers arrayed before me.
Outside, Ho Chi Minh City's kinetic river of scooters, motorbikes and taxis flows around construction for the mega city's new subway system, and the entrance to Pasteur Street's hip upstairs is partly hidden by a tailor shop, friendly foot-massage women and locals playing cards.
There's plenty of local flavour in the beers. Since arriving in Vietnam just nine months before, Violette has been on a mission to scour the country for indigenous ingredients. Motorbike journeys through the Mekong Delta and trawling the neighbourhood markets of Ho Chi Minh City have uncovered local flavour accents for his punchy beers.
A bold Imperial stout combines cinnamon, vanilla and cocoa nibs; coffee from the highland town of Dalat underpins a brown ale; and oolong tea and passionfruit have also been used in Pasteur Street's diverse portfolio of almost 20 brews. And rather than brewing a more traditional range of beers for Colorado punters, he's thoroughly enjoying the challenge of launching an experimental brewhouse harnessing a whole country of new flavours.
"Finding the local ingredients and crafting the recipes has really been the fun part."
From my tasting flight, jasmine slyly infuses Pasteur Street's hoppy IPA, jackfruit adds zing to a wheat beer, and my two favourite brews of the day are both perfect matches for Saigon's sullen tropical heat.
Delicate pepper from the southern island of Phu Quoc combines with lemongrass and ginger in a refreshing saison beer, and rambutan adds a tropical tartness to Pasteur Street's sour mash amber brew.
25 Jun, 2015 3:00pm
2 Jul, 2015 3:00pm
Despite initial challenges in importing specialty malts and hops, the beers really are impressive on a global scale and already Pasteur Street Brewing is attracting a diverse crowd of Saigon expats, thirsty tourists and curious locals. Even 1 litre growlers are available, delivered through Ho Chi Minh City's compelling buzz by a ducking and diving motorbike taxi, and there are plans to open in the northern capital of Hanoi.
|
en
|
Announcing the August Book Choice: Our Man in Havana by Graham Greene - East London Book Club and Socials (London, England)
Announcing the August Book Choice: Our Man in Havana by Graham Greene
The August Book Choice is Our Man in Havana by Graham Greenehttp://www.meetup.com/book-club-london-east/calendar/13827704/When: Monday, August 9,[masked]:00 PMWhere: The Slug and Lettuce (this is a fairly quiet one)184 George Lane South WoodfordE18 1AYLONDONThis satirical novel is great fun, but within the 220 pages of this slim volume, Greene manages to say a few important things about social class, the Catholic Church, and the absurdity of international relations. Set in pre-Castro Cuba it is hilarious but filled with clever insights and an array of richly drawn characters. It tells the story of the small man, James Wormold, a british vacuum cleaner seller, and his experiences as accidental member of the secret service. Unwillingly drafted into working as a spy, he begins to fabricate reports and a whole world of secret agents and intrigues, drawing pay for imaginary people on imaginary investigations. Trouble follows when all of a sudden, the lies he has invented seem to be coming true and the plot thickens, moving along at a breakneck pace. The book shifts from an amusing satire to thriller, but doesn't lose the comedic overtones. All in all an entertaining novel from a master author.To RSVP go to August Book Choice: Our Man in Hava?Don't forget to RSVP for the July book choice too, Wide Sargasso Sea - by Jean Rhys - on Monday 12th June - RSVP for this at http://www.meetup.com/book-club-london-east/calendar/13500648/?from=list&offset=0You can always get in touch with me through the "Contact Organizer" link on Meetup: http://www.meetup.com/book-club-london-east/suggestion/
|
en
|
My student son has an orange contract, which I pay through my bank account. The contract is in his name, and he has just re-newed. He has just graduated and has been offered an EU Funded trip to Italy. He flies out on 18th October, and returns just before Christmas.What is the best option for him. I have told him he is not to actually "use" his phone when abroad, as it is going to cost for him to send text messages, and also to receive any phone calls, but I want/ need to have contact with him in an emergency.What is the best option?1/ Buy a cheap payg phone here in the uk, and get an Italian SIM card over there?2/ Buy a cheap payg phone here and get a UK sim card - is there one that can do roaming?3/ Skype phone? I don't know anything about the Skype phones, but it is something he has thought about.Any help or pointers would be much appreciated.ThanksTessa User-B4AC5E45-C5DF-44A7-80B2B7B8113A6C82
UndyerThanks everso for all your pointers - To me it sounds like you have been in my situation!Son now on way to Rome,then off to Sciliy where he is staying. Added roaming to his orange contract for £5 for a month, which will allow him to receive calls at no extra cost. Making calls (dare he!) is at a reduced rate. However, he did tell me he was shopping for a Lebara card........ here in the UK on Saturday, not sure if he did get one though.He has a few Euros in cash, but also has a Post Office pre paid "credit card" which has Euros on it, and can be topped up from here, by Mum! User-B4AC5E45-C5DF-44A7-80B2B7B8113A6C82
Undyer Thanks everso for all you info. Trying to remember simple things like adapter plugs - they are very easily forgotten, especially by.........He is a lucky lad - wish I was going to Italy for a couple of months, expenses paid! User-B4AC5E45-C5DF-44A7-80B2B7B8113A6C82
Here is a photo of the 3 Pin adapter plug, but note that it will not fit older 2 Pin sockets. User-B4AC5E45-C5DF-44A7-80B2B7B8113A6C82
He'll need at least one adapter to plug his charger into Italian socket - confusinglyly they have two types of socket one with 2 pins and one with 3 ( He may have to buy a 3 pin one locally if they use that where he is going. A good idea is to get a round 2 pin shaver adapter here before he goes - or buy an international adapter set here (he might still need to get a 3 pin one in Italy - I DID!!) User-B4AC5E45-C5DF-44A7-80B2B7B8113A6C82
|
en
|
District President Kurtis Schultz, accompanied by Rev. Dr. Tilahun Mendedo, President of Concordia College – Selma, AL, embarked on January 5th for a 13 day trip to Ethiopia. The Southern District Board of Directors at its December, 2010, meeting adopted a resolution that the Southern District express its strong desire for greater mutual conversation, encouragement, and kingdom work between the Southern District and the Ethiopian Evangelical Church, Mekane Yesus. They are the largest and fastest growing Lutheran church body in the world.The pastors’ itinerary included meeting with the leadership of Mekane Yesus, as well as visiting congregations and historical places.
|
en
|
Indicators on cheap psychic You Should Know ☆☆☆☆☆ - cheappsychicreadingsguy44's soup
You could learn that the Unique sensitivity furnished by self-hypnosis is really an aid to achieving your objectives by psychic means.
We're all human and all of us wrestle with thoughts that we'd like solutions to. At times, speaking with a psychic may be the way to get the responses we would like.
To meditate, near your eyes and draw inside a deep and sluggish breath. Then, inhale via your nose. Hold the breath in for a moment. Breathe back again out via your mouth.[five] Taking part in soft new music from the qualifications could assist you continue to your head. Or you could chant a mantra to take action – this can be a phrase or quick phrase that you simply repeat to yourself time and again all over again.
a uniform temperature, the new water would reduce enough mass to freeze first [eleven]. Kell Hence argued that the phenomenon (then a standard
Compose what relates to you as intuition. This is called an energetic impact. Don't edit anything at all. It's best if the person who provides you with the item basically understands the proprietor but doesn't let you know. This way you could Assess Everything you compose down to the particular facts.
" "There might be 4 diverse leads to, any one of that may make the same outcome, viz., the patient bit by bit starving to death, from want of diet: Defect in cooking; Defect in preference of food plan;
You can use photographs in its place as being the inquiry objects. Have a pal select pics outside of Publications, and seal them in envelopes. Then, see what number of facts you come up with regarding the pics.
Mainstream science isn't quite at The purpose of accepting the validity of scientific reports executed in parapsychology and consciousness study.
A pair of Mk2 Virgo arrived along on eBay using a great Acquire It Now price, and not far too considerably to travel to gather them. I succumbed, far more from curiosity than anything else … It will be uncomplicated ample to move them on the subsequent 7 days, after all.
. They offer readings by phone or Stay chat and have psychics that specialise in adore and relationships, finance and profession, the ones that interpret dreams, tarot readers plus some even do numerology! When it's time for you to pay, it's only $1 for every minute for a private very affordable psychic reading!
Visualize by yourself connecting with the item's Vitality in order to determine its locale. Request yourself whether It appears somewhere substantial or low, and whether it's concealed below a little something or placed inside some thing.
2. Sorrow is overmuch when it hurteth and overwhelmeth mother nature by itself, and destroyeth bodily wellness or comprehension. Grace may be the thanks qualification of character, and duty is the proper employment of it, but neither of these should wipe out it. As civil, and ecclesiastic, and domestic authorities are for edification and not for destruction, so is also individual self govt.
I'd listened to Audio Physic (AP) speakers numerous occasions at Shows, and also the overriding impression were of a dynamic and fairly exciting seem, but by using a tonal thinness that really did not attract me. Box Swapper however I am, AP speakers by no means manufactured it on to my Want List for that cause.
This requires a further ability, exactly where in place of just recognizing and sensing Electricity, one particular need to have the ability to govern it. These kinds of a power usually takes a long time to perfect.
|
en
|
Meditation for Freeing Masculine Burden - Masculine Practices - THE VIRTUAL WORKSHOP
Meditation for Freeing Masculine Burden
In this practice from the 2019 Embodied Relationship Training Salon with John and Kendra Cunov, you will connect to the place in your heart that feels burdened, trapped, constrained, and is aching for freedom, and then feel out to infinity & inward to the vast internal universe within you, touching the freedom found in your own essential masculine.
Sit with your eyes closed in an upright seated position with your spine tall and strong while pressing the souls of your feet to the ground. Breathe deeply and smoothly into your lower abdomen and relax the center column of your body. You will then connect to the place in your heart that feels burdened and then make a sound, giving yourself the permission to feel and express the pain in that place. Then, once you have touched that place fully, you will begin to feel out to infinity from the center of your heart, and then deep into the vast cosmos of the very core of you, and connect to the freedom that is available in any moment through your essential masculine.
Wim Hof Breath Practice
This breath practice as led by John at the May 2019 Embodied Men's Leadership Intensive in Mount Shasta, includes 3 rounds of 30 breaths. Sit in a grounded position on the floor or in a chair. You will inhale 100% of your air through your mouth, engaging the entire torso with your inhale, and the...
Macrocosmic Orbit Practice
This is a masculine solo sensual practice that you can do before you make love or as a breath practice to ground yourself.
Begin seated with a strong spine, eyes closed, navel tucked in, and sacrum tipped down. Then plug your feet and sacrum into the earth, which creates a tripod connected to t...
Horse Stance Practice with Systema Br...
This is a practice John taught live at the May 2019 Embodied Men's Leadership Intensive in Mount Shasta for training yourself to be with discomfort without collapsing in. Maintaining the Systema Breath practice (inhaling through the nose and exhaling through pursed lips, as if blowing out a candl...
|
en
|
Drive: 9 Lessons to Win in Business and in Life - Parable Christian Stores
Miller, Kelley Earnhardt Hardcover
An inspirational, practical guide to success in business and life learned through the opportunities and challenges of growing up as the daughter of NASCAR legend Dale Earnhardt Sr. and becoming one of the most influential women in professional...+
|
en
|
June 2019 – Page 2 – Michael-Kors Outlet Official
Factors to Consider When Choosing the Best Startup Marketing Agency Startup marketing should make use of the digital marketing for them to expand their business. Due to other responsibilities that you might have as a startup business you will not have time to build your digital marketing strategies. By that I mean that you should […]
Tips to Consider When Choosing a Mold Removal Company If you happen to see mold growth in your house you will have to call the mold remediation companies in your area. Mold can be a nuisance to your home and even make a bad image for your home. Thus it is important for you to […]
How to Choose the Best Candles For a very long time now, people have been utilizing candles to do very many things and they still function up to date. Before, people used it primarily as a source of light in the area they were in especially if there is no other source of light but […]
What You Need to Include in Your Blog Starting Process There are high chances that you are here since you have identified that blogging can be one of the main business that is popularizing very much. Now that it is time that you need to be taking your business on another level you should ensure […]
|
en
|
BICI Commissioner view on implementation 2 years after | Bahrain Justice & Development Movement حركة البحرين للعدالة والتنمية
BICI Commissioner view on implementation 2 years afterBy adminPublished: November 22, 2013Posted in: Latest NewsTags: 2years, bahrain, bici, BJDM, Commissioner, implementation, Nigel, Rodley, Sirnigelrodley The following is a statement from Sir Nigel Rodley, originally given to Gulf Daily News and Al Wasat, on the occasion of the second anniversary of the publication of the Bahrain Independent Commission of Inquiry (BICI). Sir Nigel Rodley was a lead Commissioner of the BICI and the following is his assessment of the implementation of the BICI.
"Looking back two years after the BICI presented its report to His Majesty, I cannot hide my disappointment at the current situation. The dignified response of His Majesty to the report, accepting its recommendations on behalf of the Kingdom of Bahrain, led many to believe that there would be redress for victims of the serious human rights violations that had occurred, that there would be a halt to the violations that were still occurring and that these events could be a basis for reconciliation between Bahrain's two main communities. I believed these things myself.
There have indeed been some positive developments, such as the restoration of employment to many of the thousands who had been arbitrarily dismissed from their jobs. However, while I no longer have access to the important sources of information that I had as a BICI member, especially those that the GOB fulsomely provided, it isdifficult not to conclude that serious human rights violations continue, aided and abetted by general, if not total, impunity for their perpetrators. For example, there are persistent reports of torture and disproportionate or inappropriate use of injurious crowd control measures, notably the use of birdshot and gas canisters.
The repeated dangling of an invitation to the UN Special Rapporteur to visit the country Bahrain, followed by its peremptory withdrawal, can have only one plausible interpretation: that he will find extensive manifestations of the grave, criminal human rights violations that are within his mandate. I know my current successor as Special Rapporteur, Juan Mendez, well. He is a person of total honesty, integrity and professionalism. The insulting and disrespectful way he has been treated does little credit to the GOB.
Meanwhile, the maximum punishment that has been meted out to the few perpetrators of torture who have been prosecuted and convicted is seven years – even when the torture has been fatal. This compares abjectly with the sentences as high as fifteen years given to protestors who have neither used nor advocated violence.
The provocative detention of opposition leaders and human rights advocates, combined with the violations I have mentioned, must seem to Bahrainis like a comprehensive rejection in practice of the main concerns and recommendations of BICI.
Of course, I am aware of the ongoing violent protests that any self-respecting government would feel obliged to try to stop, even while a conciliation process may be under way. Yet, a successful conciliation process would be more likely to result in the long-term end to violent opposition. I have no reason to change the view I had two years ago, namely, that an improvement in the human rights situation following the main substantive recommendations of BICI would facilitate a more successful reconciliation process, if only by replacing a sense of injustice by a sense of justice. "
|
en
|
indonesian steam coal non cooking indonesian steam coal
2011-12-15 Effect of low grade copper ore on process control and costing at Mosaboni concentrator * P. P. Midha and ** A. Gururajachar INTRODUCTION : The concentrator was
A mechano-chemical process called Rapid Oxidative Leach® (ROL®) is the gamechanger for miners struggling to extract copper and gold from low-grade ores. The
2014-2-1 Increasingly, the mining industry is faced with the need to process low-grade ores using low-cost technology to meet world demand for copper. Heap and dump
concentrate obtained from flotation of the low-grade copper ore was treated by atmospheric leaching and high-pressure oxidative leaching processes. A maximum
2017-6-9 Oxide copper ore, mixed oxide-sulphide ores and low-grade copper sulphide ore, which, for economic reasons, cannot be enriched by flotation, may be processed
This paper deals with the investigation of column leaching of low-grade ores from the copper mine Cerovo, Serbia (the approximate Cu content in the ore ranges
How is leaching carried out in case of low grade copper
2019-5-1 In case of low grade copper ores, leaching is carried out using acid or bacteria in the presence of air. In this process, copper goes into the solution as Cu 2+
2020-8-1 In China, 57% of reserves have a copper grade lower than 0.7%, hence it is increasingly important to utilize low-grade copper resources. Heap leaching is a very
2019-9-10 Low-Temperature Roasting Process. In order to investigate the effects of additive dosage, particle size of the ore sample, and roasting temperature and time on the
The process described herein for the recovery of copper and molybdenum for low grade copper concentrates has the following advantages over the current
sidered. A process flow for the recovery of copper from silicate-containing low-grade copper ores is proposed as a result of these studies. Key words: Low-grade copper ore, Chalcopyrite, Flotation, High-pressure oxidative leaching Accepted 24 April, 2017 *e-mail: [email protected]
The process described herein for the recovery of copper and molybdenum for low grade copper concentrates has the following advantages over the current practice: a. The process recovers up to 84% of the residual molybdenum, while also recovering up to 96% of the residual copper from low grade
2021-8-27 In this work, the parameters affecting the recovery of copper from the low-grade sulfide minerals of Sarcheshmeh Copper Mine were studied. A low-grade sulfide ore was used with a copper grade of 0.25%, which was about 28% of the mineral oxide, and the sulfide minerals made up the rest. Much more sulfide
2020-12-4 These low-grade resources contain more than 70% of the world's copper reserves and they cannot be processed using traditional leaching processes. Standard leaching techniques on primary copper ores are blocked by a hard, non-reactive coating, which forms around the crystal structure of the ore.
某难选铜镍矿石选矿新工艺-New Beneficiaton Process of
2015-2-27 ;low-grade copper-nickel ore contains Cu 0.27% and Ni 0.72%.In order to achieve the results of comprehensive recovery and highly efficient separation of copper nickel mineral in ores. This paper adopts the process of copper nickel selective flotation process with efficient copper minerals collector LP-01 which was the results of independent research and development as copper mineral collector ...
Copper can be obtained from low-grade ore through the process of leaching using acid or bacteria (leaching is a process in which ore is treated with a suitable reagent that dissolves ore but not the impurities). The solution containing copper can be reduced with the help of reducing agents such as scrap iron or H2 to get copper metal. Cu2+(aq) + Fe Cu(s) + Fe2+(aq) Cu2+ (aq) + H2(g) Cu(s) + 2 ...
2014-2-1 Increasingly, the mining industry is faced with the need to process low-grade ores using low-cost technology to meet world demand for copper. Heap and dump leaching tend to be the technologies of choice for low-grade secondary copper sulfide ores and, to a much less extent, primary copper sulfide ores such as chalcopyrite ( Domic, 2007 ).
2020-8-1 In China, 57% of reserves have a copper grade lower than 0.7%, hence it is increasingly important to utilize low-grade copper resources. Heap leaching is a very competitive process in treating low-grade copper ores, including ore containing oxides and secondary sulfides (Brierley, 2010).
2020-3-29 The enormous demand for and consumption of nickel in industrial applications has induced the depletion of high-grade nickel sulfide ore, which has inevitably led to the utilization of the substantial deposits of depreciated low-grade nickel-copper sulfide ore. In this work, the mineral phase transformation and sulfation kinetics of nickel, copper, iron, and magnesium in the roasting process ...
|
en
|
139 Sunset Irvine, CA 92602 - MLS#PW18256447
MLS#: PW18256447
Lot: 5,966 SqFt
Behind the gates of the Groves at Orchard Hills, sits a gorgeous home with breathtaking views. This La Vita Residence 2 boasts views unlike anywhere else in Irvine. Home features Tuscan exteriors with custom design features and uniquely inspired interiors. Highly sough after first floor Master bedroom with an en-suite bathroom. Master suite has unobstructed views from the French doors, dual vanity sinks, soaking tub, shower, and walk-in closet with built-ins. The two story entrance leads to a kitchen and Great Room that expands into an Outdoor California Room seamlessly with pocket sliding doors. Gourmet kitchen features a large kitchen island, built-in sub-zero refrigerator and 6-burner Viking stove top and ovens. Behind is a prep kitchen/craft room and laundry. The California Room and backyard offer a fireplace, built-in barbecue, water feature, TV-mount and plenty of additional space for an outdoor dining and lounging. Upstairs you'll find a large loft and two generously sized secondary bedrooms with en-suite baths, and second laundry room.. This community features resort-like amenities including multiple pools, parks, hiking and biking trails, basketball and tennis courts, with close proximity to the fabulous Orchard Hills Shopping Center for local shopping and dining experiences. Home is walking distance to award winning Orchard Hills K-8 Grade School.
Approx Living Area: 3,609 SqFt
Fireplace: Yes, Outdoors
Community Features: Pool, Spa, Barbecue, Outdoor Cooking Area, Playground, Tennis, Sport Court, Other Courts, Biking Trails, Hiking Trails, Club House
|
en
|
The Avenger SS is a distance driver for ladies who are just learning to throw, combining long glide and ease of control, even if you don't have a lot of snap it will stay straight for a while, before finishing with a slight fade to the left for a right hand back hand throw. The 150 Class Avenger SS is great for new players.
|
en
|
Estate planning and the family cottage | Garton & Harris
On behalf of Garton & Harris posted in Wills on Thursday, June 26, 2014.
Many British Columbia residents and others across the nation enjoy vacation time and wonderful memories spent at family cottages. Part of the responsibility of owning a getaway home includes knowing when it's time to sell the property or turn over ownership to an heir. Tax considerations generally mean that a person should transfer the property after they retire because their income will decrease. However, in some cases, family members aren't invested in the property and do not want to take it over when the older generation dies. In such situations, it might be best to sell the property.
One financial advisor recommends that the owner assess the situation with a more objective eye. Instead of including the property in their wills, they might decide to put it on the market in the best interests of all parties.
Sometimes, the estate holder will choose to pass the property to only one heir. If this occurs, other family members might feel excluded, which could cause intense emotions to surface. In other cases, the parties might not have the financial wherewithal to maintain the property. They will need to pay property taxes on it, which could be a huge financial drain.
One solution is through making other financial arrangements for managing the property such as a sale from the estate to the future owner. While families sometimes opt to leave a cottage in the estate for all the members to share, the related costs and sharing of the home could quickly sap the joy out of owning it. In some cases, the vacation home has fallen into a state of disrepair due to lack of proper maintenance.
Handling a family cottage during estate planning can be a major challenge. An estate lawyer might offer solutions on ways to address the issue that are in the best interests of the involved parties.
Source: CTV News, "Financial advice: Say goodbye to family cottage before it's too late ", David Friend, June 19, 2014
|
en
|
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.