Split (1)

train · 44k rows

Subsets and Splits

No community queries yet

The top public SQL queries from the community will appear here once available.

messages listlengths 1 1	topic stringlengths 2 60
[ { "date": "2023-04-02", "forum": "FiveWin for Harbour/xHarbour", "text": "I have been using Windows servers for many years (Server 2008, 2012, etc., even earlier and later versions), and, in addition to having to try to program my software as well as possible, I have had many problems due to the choice of hardware, which, in addition from the need to invest in its acquisition, then I have had to maintain and pay for said maintenance.\nThat was left behind, since with the offers that are currently in the cloud, I can have adequate hardware, with a Windows Server of the latest version, for an affordable price.\nIf I take account of what I pay monthly, it is cheaper than investing in equipment that after a few years I have to change again, in addition to not having to pay for hardware maintenance.\nScalability in these cases is an important factor to consider. If more resources are needed, it is essential to know that I will be able to scale it up or down without problem.\nmy two cents", "time": "00:20", "topic": "Advise in Server hardware", "username": "cnavarro" } ]	Advise in Server hardware
[ { "date": "2023-04-02", "forum": "FiveWin for Harbour/xHarbour", "text": "Dear Cristobal,\n\nI fully agree with you <!-- s:-) --><img src=\"{SMILIES_PATH}/icon_smile.gif\" alt=\":-)\" title=\"Smile\" /><!-- s:-) -->", "time": "15:05", "topic": "Advise in Server hardware", "username": "Antonio Linares" } ]	Advise in Server hardware
[ { "date": "2023-04-03", "forum": "FiveWin for Harbour/xHarbour", "text": "Hello friends,\nfor our use I9 processors would be best:\n\n[quote:rz7l5yis]When comparing high-end Xeon and i9 processors for running 5 virtual machines and RDP for 5 users, both can deliver impressive performance. If your primary concern is speed, a high-end i9 processor may offer slightly higher clock speeds and better single-threaded performance[/quote:rz7l5yis]. \n\nI think in a small entrepreneur-led company, speed is the most important thing.\n\nBest regards,\nOtto", "time": "20:31", "topic": "Advise in Server hardware", "username": "Otto" } ]	Advise in Server hardware
[ { "date": "2023-04-03", "forum": "FiveWin for Harbour/xHarbour", "text": "Cristobal, you may be right in general.\nBut not in the case of Marc. It is an entrepreneurial company and here it is not about money but about his personal time. \n\nA RDP server in the own network, data backup directly with WINDOWS server backup on connected hard disks. \n\nAnd the most important: my data is mine and inhouse.\n\nBest regards,\nOtto", "time": "21:07", "topic": "Advise in Server hardware", "username": "Otto" } ]	Advise in Server hardware
[ { "date": "2023-04-03", "forum": "FiveWin for Harbour/xHarbour", "text": "Thanks for several inputs on my question.\n\nI'm sure that I will not start using the special servers system that come for 3500 euro. More hardware than needed.\n\nCloud : tja... I think that there will always be smarther people that can have access and maybe block data. even FaceBook ect. where hit. And so, I like to keep my data inhouse.\nBut I did a request for information and will see for a test scenerio, just to have the feel of it.\n\nDesktop versus Laptop : At this moment Desktop because when something is wrong, we can open it and mostly repair it. Desktop fault is mostly 'call the shop'. Rearly happens I have to say.\n\n\n64 GR ram : Will FW ever use it ? Is FW limited to 16-32 ram ? \nSSD = most speed for now\nThat 1 Gig Network. There are 10 gig cards and corresponding hardware. 10 Gig will make a difference in a typical dbf/Xbrowse system not ? or due to using Server 2019 and RDP Cards with 1 versus 10 won't matter, since all\nprocessing is done on the I9\n\nThis Desktop has nice specs for € 999\n\nIntel Core i9 10900 (10 Cores - 20 Threads) Processor\nMoederbord met H410-chipset\n64GB DDR4 (max. 3200MHz) Werkgeheugen\n2000GB NVMe M.2 SSD Opslag\nIntel UHD Graphics 630 onboard\n1 Gigabit Netwerkcontroller onboard\n5.1-kanaals Audiocontroller onboard\n420 watt ATX Voeding\nWiFi 5 (Wireless-N+AC) en Bluetooth 4.2\nZwarte M-ATX Mini-tower Behuizing\nAfmetingen: 36 x 18 x 39 cm (HxBxD)", "time": "23:07", "topic": "Advise in Server hardware", "username": "Marc Venken" } ]	Advise in Server hardware
[ { "date": "2023-04-03", "forum": "FiveWin for Harbour/xHarbour", "text": "About Windows Server 2019 STANDARD\n\nI have not had a price yet for a Server 2019 program and licence.\n\nWe are with 3 people so the licence of 5 will be needed.\n\nHowever, I heard that it was possible that we can have a 2 person licence, or it is included in the server 2019 standard program.... and the third person could work on the server itself like it is here computer.\nShe only works very short time on the cpu and always on the most light software purpose, simply and a amount of products that are diliverd. (Stock changes)\n\nThere are several server 2019 versions. For very small business, what you suggest ?\n\nI'm in the final face now and like to desited witch system to go for\n\nThanks already for helping", "time": "23:21", "topic": "Advise in Server hardware", "username": "Marc Venken" } ]	Advise in Server hardware
[ { "date": "2023-04-04", "forum": "FiveWin for Harbour/xHarbour", "text": "hi Marc,\n[quote=\"Marc Venken\":12i4ro9h]Intel Core i9 10900 (10 Cores - 20 Threads) Processor[/quote:12i4ro9h]\ndon´t know if \"Desktop\"-CPU work fine with Server Software\nthose newer \"Desktop\" CPU have \"P\"-Core and \"E\"-Core\n\n\"real\" Server most use Intel XEON or AMD EPYC CPU and use ECC RAM\nthose CPU have no \"E\"-Core so i don´t know how Server 2019 / 2022 Software will react\n\nread here : Alder Lake 12th Gen Intel CPU won't boot on Windows Server 2022 with HyperV enabled\n[url:12i4ro9h]https://techcommunity.microsoft.com/t5/windows-server-for-it-pro/alder-lake-12th-gen-intel-cpu-won-t-boot-on-windows-server-2022/td-p/3010622[/url:12i4ro9h]\n---\n\nas Tim say : how much Server Power do you need <!-- s:?: --><img src=\"{SMILIES_PATH}/icon_question.gif\" alt=\":?:\" title=\"Question\" /><!-- s:?: --> \n\ni know People run many \"virtual-Machine\" on Server which need much CPU Power and RAM\n\nbut if you run only PostgreSQL or MySQL, a \"Celeron\" CPU will do the Job for 3 (fast) Workstation\nit is like a NAS which have \"build-in\" Support for PostgreSQL or MySQL\n\n---\n\nabout RAM\nin my \"Mini\" Server i have 2 x 4 GB \"Dual-Channel\" DDR4 RAM\nfor PostgreSQL Server i use 50 % of RAM as \"Cache\"\n\nremember when use PostgreSQL or MySQL to \"optimize\" RAM for \"Cache\"\n\n[quote:12i4ro9h]\\PostgreSQL\\xx.x\\data\\postgresql.conf\n\\ProgramData\\MySQL\\MySQL Server 8.0\\my.ini[/quote:12i4ro9h]\n\n---\nofficial Microsoft\n[quote:12i4ro9h]Microsoft Windows Server 2019 RDS User CAL - 5x Remote Desktop Client User Access Lizenz 821,00 €\nMicrosoft Windows Server 2022 5x RDS User CAL - 5x Remote Desktop Client User Access Lizenz 862,00 €[/quote:12i4ro9h]\nhave a look @ Ebay <!-- s:D --><img src=\"{SMILIES_PATH}/icon_biggrin.gif\" alt=\":D\" title=\"Very Happy\" /><!-- s:D --> \n\n! Note : if it is for DELL or HP than it is \"bundle\" to Hardware so DON´T buy this\n\n---\n\nWorkstation : do you need a Windows 11 \"ready\" PC for 299,- € <!-- s:?: --><img src=\"{SMILIES_PATH}/icon_question.gif\" alt=\":?:\" title=\"Question\" /><!-- s:?: --> \n[quote:12i4ro9h]\nAMD Ryzen 5 PRO 4650G (Zen 2), 6-Core ( 6× 3700 MHz, Turbo 4200 MHz) + HT\n16 GB DDR4 , Dual-Channel (2 x 8 GB), 3200 MHz Kingston FURY Beast \n500 GB Kingston® NV2 NVMe, max. 3500 MB/s \| 2100 MB/s \n\nGigabyte A520M K V2, \n1× PCIe 3.0 ×16 (×16 Modus), 1× PCIe 3.0 ×1 \n1× M.2, Key M, 2280 (PCIe 3.0 ×4/SATA),\n4× SATA 6 GBit/s mit RAID 0, 1, 10\n\nExtern (I/O-Panel)\n4× USB 3.2 Gen1, Typ A\n2× USB 2.0\n\nIntern (Header)\n2× USB 3.2 Gen1\n4× USB 2.0\n\n1× HDMI 2.1 (2160p@60Hz)\n1× D-Sub (VGA)\nHDCP 2.3[/quote:12i4ro9h]\n[url:12i4ro9h]https://www.csl-computer.com/pc-csl-sprint-5710-ryzen-5.html[/url:12i4ro9h]\n\nyou only need to buy a \"License Key\" for Windows 7/8/10 which can be used for Windows 11\n\nif you use Server 2019 / 2022 buy a \"PRO\" Version \"License Key\" and use MediaCreationTool \nyou can to download ISO or let MediaCreationTool write on a 8 GB USB.Stick (will FORMAT it)", "time": "05:18", "topic": "Advise in Server hardware", "username": "Jimmy" } ]	Advise in Server hardware
[ { "date": "2023-04-04", "forum": "FiveWin for Harbour/xHarbour", "text": "All of my clients are \"multi-user\". Some have true Windows Server software but most just use Windows 10 or 11 Pro.\n\nWhile some have been using ADS ( Client Server ), in more recent years, 3 - 5 users, on current computers, have NO complaints about speed / performance.\n\nMost are using an i5 processor on the server. Right now, I'm using a Dell Inspiron AIO, with ADS, as a \"server\". That's a non-power computer. I access it with Windows Remote Desktop from a Mac, two Macs running Parallels, and a Surface 4 notebook. I can do data intensive work, multiple files open at once ( with indexes ), etc. and NEVER have performance issues in real world processing.\n\nThat computer an i7 processor with 16GB of RAM and an SSD. For an office, it is certainly good enough. Of course, in my previous note I mentioned a super inexpensive computer I bought for testing and it works fine as a server, or can also be a workstation to the Dell. I also don't know that you will be disappointed with the performance of your Gigabit internet cards. They will probably be just fine.\n\nAgain, you are talking about a small, in-house, system for 3 users. It's not about test numbers. How well will it work with the data you currently process in your daily work ? That is what is important.\n\nMy clients are ALL repair shops. Some are small and others are quite large, and even multi-location. No one using current Windows 11 computers is having any problems using the software on 3 to 5 workstations, and they are processing data, and searching for parts and information on the web, all day long.", "time": "23:22", "topic": "Advise in Server hardware", "username": "TimStone" } ]	Advise in Server hardware
[ { "date": "2023-04-05", "forum": "FiveWin for Harbour/xHarbour", "text": "[quote=\"TimStone\":3c1zo4o5]\n\nMost are using an i5 processor on the server. Right now, I'm using a Dell Inspiron AIO, with ADS, as a \"server\". That's a non-power computer. I access it with Windows Remote Desktop from a Mac, two Macs running Parallels, and a Surface 4 notebook. I can do data intensive work, multiple files open at once ( with indexes ), etc. and NEVER have performance issues in real world processing.\n\n[/quote:3c1zo4o5]\n\nThis is the kind of setup i'm trying out. Have to do some adjustmens in my software for paths, but than I have RDS working. No server, just a Win 10 computer. Like You, Otto is also happy with this config, so it should be more than enough for my small business. I'm Not using a ADS software however because i'm into dbf,cdx\n\nI discoverd a maybe bigger problem in my software. Using Xbrowse as my core system in almost all code, I see that moving the cursor in the cells, functions are executed like retrieving data. Normaly this should only happen when data is changed, so I have codeblocks wrong in use. I have to digg a bit deeper into this and post some issues here when I find them.", "time": "20:42", "topic": "Advise in Server hardware", "username": "Marc Venken" } ]	Advise in Server hardware
[ { "date": "2023-04-06", "forum": "FiveWin for Harbour/xHarbour", "text": "Do I have to see Windows server 2019 and RDS as 2 software items ?\nUsing RDS I don't need Windows server then ?\n\nThe CPU I9 mentioned above has a win11-Pro installed.", "time": "10:19", "topic": "Advise in Server hardware", "username": "Marc Venken" } ]	Advise in Server hardware
[ { "date": "2013-03-06", "forum": "FiveWin for Harbour/xHarbour", "text": "Hi,\nProblem related to Harbour , but I'm thinking that this forum can help too ... <!-- s:) --><img src=\"{SMILIES_PATH}/icon_smile.gif\" alt=\":)\" title=\"Smile\" /><!-- s:) --> I'm creating project with minGw , it's running OK . Also I'm trying to build that with Borland ( Bcc 582 ) . Compiler return error , which related to SWITCH / CASE . It says that integer or char vr must be . Sample from TMySql.prg :\n[code=fw:3bihxyk6]<div class=\"fw\" id=\"{CB}\" style=\"font-family: monospace;\"><br /><span style=\"color: #00C800;\">SWITCH</span> ::<span style=\"color: #000000;\">aFieldStruct</span><span style=\"color: #000000;\">[</span> nNum <span style=\"color: #000000;\">]</span><span style=\"color: #000000;\">[</span> MYSQL_FS_TYPE <span style=\"color: #000000;\">]</span><br />      <span style=\"color: #00C800;\">CASE</span> MYSQL_TYPE_TINY<br />         <span style=\"color: #00C800;\">RETURN</span> <span style=\"color: #ff0000;\">\"L\"</span><br />      <span style=\"color: #00C800;\">CASE</span> MYSQL_TYPE_SHORT<br />      <span style=\"color: #00C800;\">CASE</span> MYSQL_TYPE_LONG<br /> </div>[/code:3bihxyk6]\nVars \"MYSQL_\" indetifiers are in mysql.ch and related to integers . This ch is in hrb\\include ... \nWhy I'm getting this error ?", "time": "08:11", "topic": "Advise is needfull ..", "username": "Rimantas" } ]	Advise is needfull ..
[ { "date": "2006-05-06", "forum": "FiveWin para Harbour/xHarbour", "text": "Olá Antonio,\n\nSeria possível mudar o método \"Aevalwhen\" de WINDOW.PRG para trabalhar com FOR EACH de xharbour ? Veja um exemplo abaixo:\n\n[code:35xwhpax]\n#include \"FiveWin.ch\"\n\nfunction Main()\n\n local oDlg, cName := Space( 10 )\n\n DEFINE DIALOG oDlg TITLE \"Testing ForEach for speed\"\n\n @ 1, 2 SAY \"Name:\"\n\n @ 1, 7 GET cName\n\n @ 2, 5 BUTTON \"AEvalWhen() of FWH\" ACTION FWH_EVAL( oDlg )\n\n @ 3, 5 BUTTON \"My AEvalWhen()\" ACTION MY_EVAL( oDlg )\n\n ACTIVATE DIALOG oDlg\n\nreturn nil\n\nfunction FWH_EVAL( oDlg )\n\n local x, nStart\n\n nStart := Seconds()\n\n for X = 1 to 100000\n oDlg:AEvalWhen()\n next\n\n msgstop( Seconds() - nStart )\n\nreturn NIL\n\n//----------------------------------------------------------------------------//\n\nfunction MY_EVAL( oDlg )\n\n local n\n local aControls := oDlg:aControls, aVarray\n local x, nStart\n\n nStart := Seconds()\n\n for X = 1 to 100000\n if aControls != nil .and. ! Empty( aControls )\n for each aVarray IN oDlg:aControls\n if aVarray != nil .and. aVarray:bWhen != nil\n if Eval( aVarray:bWhen )\n aVarray:Enable() // keep this as ::\n else\n aVarray:Disable() // keep this as ::\n endif\n endif\n next\n endif\n next\n\n msgstop( Seconds() - nStart )\n\nreturn NIL\n\n* Extract from WINDOW.PRG\nMETHOD AEvalWhen() CLASS TWindow\n local n\n* local aControls := ::aControls, aVarray\n\n if aControls != nil .and. ! Empty( aControls )\n* for each aVarray IN ::aControls\n* if aVarray != nil .and. aVarray:bWhen != nil\n* if Eval( aVarray:bWhen )\n* aVarray:Enable() // keep this as ::\n* else\n* aVarray:Disable() // keep this as ::\n* endif\n* endif\n* next\n for n = 1 to Len( aControls )\n if aControls[ n ] != nil .and. aControls[ n ]:bWhen != nil\n if Eval( aControls[ n ]:bWhen )\n ::aControls[ n ]:Enable() // keep this as ::\n else\n ::aControls[ n ]:Disable() // keep this as ::\n endif\n endif\n** next\n* endif\n*return nil\n[/code:35xwhpax]\n\nExecutando o exemplo acima em meu computador o tempo fica assim:\n\nClicando em \"AEvalWhen() of FWH\" gasta o tempo de 1.203 segundos\nClicando em \"My AEvalWhen()\" gasta o tempo de 0.625 segundos, ou seja quase a metade do tempo <!-- s:lol: --><img src=\"{SMILIES_PATH}/icon_lol.gif\" alt=\":lol:\" title=\"Laughing\" /><!-- s:lol: --> \n\nObrigado,\n\nRossine.", "time": "20:31", "topic": "AevalWhen de WINDOW.PRG", "username": "Rossine" } ]	AevalWhen de WINDOW.PRG
[ { "date": "2006-05-07", "forum": "FiveWin para Harbour/xHarbour", "text": "Rossine \n\n Para cuando el twbrowse para xharbour free ?\n\n\n Un saludo", "time": "00:07", "topic": "AevalWhen de WINDOW.PRG", "username": "Frafive" } ]	AevalWhen de WINDOW.PRG
[ { "date": "2006-05-08", "forum": "FiveWin para Harbour/xHarbour", "text": "Olá Frafive,\n\nAqui eu gerei o WBROWSE.LIB para bcc 5.5 sem nenhum problema. Qual erro está aparecendo para você ?\n\nAbraços,\n\nRossine.", "time": "15:06", "topic": "AevalWhen de WINDOW.PRG", "username": "Rossine" } ]	AevalWhen de WINDOW.PRG
[ { "date": "2006-05-08", "forum": "FiveWin para Harbour/xHarbour", "text": "Hola Rossine\n\n Desde Recusos no funciona el twbrowse.\n\n Un saludo", "time": "15:16", "topic": "AevalWhen de WINDOW.PRG", "username": "Frafive" } ]	AevalWhen de WINDOW.PRG
[ { "date": "2006-05-08", "forum": "FiveWin para Harbour/xHarbour", "text": "Olá Frafive,\n\nCompilei o programa abaixo que usa recursos, e funcionou 100%.\n\n[code:ndnfh4jz]\n#include \"fivewin.ch\"\n\nexternal dbfcdx, ordkeyno, ordkeygoto, ordkeycount\n\n// Sample by Carlos Vargas\n\nfunction main()\n local oDlg\n\n #ifdef __CLIPPER__\n local hBorl := LoadLibrary( \"BWCC.dll\" )\n #else \n local hBorl := LoadLibrary( \"BWCC32.dll\" )\n BWCCRegister(GetResources())\n #endif \n\n private cCodigo := space(7)\n rddsetdefault( \"DBFCDX\" )\n\n use cuentas alias TEST\n index on codcta tag codigo\n index on nombre tag nombre\n ordsetfocus(\"codigo\")\n\n define dialog odlg name \"DLG_TEST\" title \"Pruba de DBSearch() com REDEFINES\"\n\n redefine get cCodigo;\n id 101 of odlg;\n update\n\n redefine btnbmp;\n id 102 of odlg;\n action ( TEST->( DBSearch( \"Catalogo de cuentas\",; //Titulo\n {\|\|{ TEST->codcta, TEST->nombre } },; //Campos\n {\"Codigo\" ,\"Nombre\"},; //Headers\n {{\"Codigo cuenta\",\"Nombre Cuenta\"},; //Array Index \"campos\"\n {\"codigo\" ,\"nombre\"}} ) ),; // \"Titulos\"\n cCodigo := TEST->codcta,;\n odlg:update() )\n redefine button id 201 of odlg action odlg:end()\n redefine button id 202 of odlg action odlg:end() cancel\n\n activate dialog odlg center\n\n close all\n\n FreeLibrary( hBorl )\n\nreturn\n\n//============================================================================//\n\nDLL32 FUNCTION BWCCRegister( hInst AS LONG) AS WORD PASCAL LIB \"BWCC32.DLL\"\n\n//============================================================================//\n\n#define TRUE .t.\n#define FALSE .f.\n\n\nFUNCTION DBSearch( cTitle, aFields, aHeaders, aOrders, oWnd )\n\n PRIVATE oDlgS ,;\n oBrw ,;\n oCombo,;\n oSayRec,;\n oSaySeek,;\n cOldOrder := ordsetfocus(),;\n lOk := FALSE,; \n nOrden := 1\n \n DEFAULT oWnd := GetWndDefault()\n\n //salta al inicio de la tabla \n dbgotop()\n\n //define dialogo\n DEFINE DIALOG oDlgS NAME \"DLG_LISTA\";\n TITLE cTitle;\n OF oWnd\n \n REDEFINE LISTBOX oBrw ;\n FIELDS;\n ID 102;\n OF oDlgS;\n UPDATE;\n ON DBLCLICK ( lOk:=TRUE, oDlgS:end() );\n ON CHANGE ShowPos( recno(), ordkeycount(), oSayRec)\n\n oBrw:Set3DStyle()\n oBrw:nHeaderHeight := 18\n oBrw:nLineHeight := 15\n oBrw:cAlias := alias()\n oBrw:bLine := aFields\n oBrw:aHeaders := aHeaders\n oBrw:aJustify := {2,0}\n oBrw:bSeek := {\|lRet\| oBrw:DbfSeek( .F. ,{\|\| Tone(500,3) }) }\n oBrw:bUpdateBuffer := {\|\| UpdateBuffer( oSaySeek, oBrw:cBuffer ) }\n\n oBrw:lRecSel := .t.\n oBrw:lTheader := .t.\n oBrw:lDrawTitle := .t.\n oBrw:cHeaderTitle := \"Tabela do Cadastro de Clientes\"\n oBrw:nTitleHeight := 30\n oBrw:aHeaderSort := { 1, \"BOTTOM\", \"TOP.BMP\", \"BOTTOM.BMP\" }\n oBrw:HeaderTImg := { \"\\fwh\\icons\\chart.ico\" }\n oBrw:HeaderHImg := { \"\\fwh\\bitmaps\\16x16\\explorer.bmp\", ;\n \"\\fwh\\icons\\dialog2.ico\" , ;\n \"\\fwh\\icons\\msdos.ico\" , ;\n \"\\fwh\\icons\\summer.ico\" , ;\n \"\\fwh\\icons\\contar.ico\" }\n oBrw:HeaderFImg := oBrw:HeaderHImg\n\n REDEFINE SAY oSayRec ;\n ID 103 OF oDlgS COLOR CLR_BLUE\n\n REDEFINE SAY oSaySeek PROMPT \"\" ;\n ID 104 OF oDlgS COLOR CLR_BLUE\n\n REDEFINE BUTTON ;\n ID 201 ;\n OF oDlgS ;\n ACTION ( lOk := TRUE, oDlgS:end() )\n\n REDEFINE BUTTON ;\n ID 202 ;\n OF oDlgS ;\n ACTION ( lOk := FALSE, oDlgS:end() ) \n \n ACTIVATE DIALOG oDlgS ;\n CENTER ;\n ON INIT ( ToolBar(aOrders) ,;\n oBrw:nHeight -= 85 )\n\n ordsetfocus( cOldOrder )\n\nRETURN ( lOk )\n\nSTATIC PROCEDURE ToolBar(aOrders)\n LOCAL oToolBar\n\n //define la barra de herramientas con el combobox de tag's\n DEFINE BUTTONBAR oToolBar OF oDlgS SIZE 30,30 3D\n\n @ 5, oToolBar:GetBtnLeft() + 3;\n COMBOBOX oCombo VAR nOrden ;\n ITEMS aOrders[1];\n SIZE oDlgs:nWidth - 25, 200;\n OF oToolBar PIXEL FONT oDlgS:oFont;\n ON CHANGE ( ordsetfocus( aOrders[2, nOrden ] ),;\n oBrw:refresh(TRUE),;\n oBrw:setfocus(), Tone(650,3) )\n\n oDlgS:SetControl(oBrw)\n\nRETURN\n\nSTATIC PROCEDURE ShowPos(nActual, nTotal, oSay)\n oSay:SetText( alltrim( str(nActual) )+\"/\"+alltrim(str(nTotal)) )\n oSay:refresh()\nRETURN\n\n\nSTATIC FUNCTION UpdateBuffer( oSay, cBuffer )\n LOCAL cMsg\n\n IF len( cBuffer ) > 0\n cMsg := cBuffer\n ELSE\n cMsg := \"\"\n ENDIF\n oSay:SetText(cMsg)\n\nRETURN Nil\n\n\n//----------------------------------------------------------------------------//\n\nDLL32 FUNCTION BWCCRegister( hInst AS LONG ) AS WORD PASCAL LIB \"BWCC32.DLL\"\n\n//----------------------------------------------------------------------------//\n\n[/code:ndnfh4jz]\n\n[img:ndnfh4jz]http://geocities.yahoo.com.br/qiinformatica2000/wbrwrec.PNG[/img:ndnfh4jz]\n\nVeja se você consegue gerar e executar este exemplo, ok ? Ele se chama SAMPLE04.PRG que se encontra junto com os fontes de wbrowse que eu modifiquei.\n\nAbraços,\n\nRossine.", "time": "17:25", "topic": "AevalWhen de WINDOW.PRG", "username": "Rossine" } ]	AevalWhen de WINDOW.PRG
[ { "date": "2006-05-09", "forum": "FiveWin para Harbour/xHarbour", "text": "Hoa Rossine\n\n Desde recursos no funciona el twbrowse, si creas el twbrowse en unas coordenadas en archivo de RC, despues no te lo pinta bien, lo pinta siempre en TOP.\n\nun saludo y gracias", "time": "23:04", "topic": "AevalWhen de WINDOW.PRG", "username": "Frafive" } ]	AevalWhen de WINDOW.PRG
[ { "date": "2006-05-10", "forum": "FiveWin para Harbour/xHarbour", "text": "Rossine,\n\nNo podemos usar FOR EACH ya que no lo soporta ni Clipper, ni Xbase++ ni C3.", "time": "09:07", "topic": "AevalWhen de WINDOW.PRG", "username": "Antonio Linares" } ]	AevalWhen de WINDOW.PRG
[ { "date": "2006-05-10", "forum": "FiveWin para Harbour/xHarbour", "text": "OK Antonio <!-- s:) --><img src=\"{SMILIES_PATH}/icon_smile.gif\" alt=\":)\" title=\"Smile\" /><!-- s:) --> \n\nun saludo y gracias\n\nRossine.", "time": "12:56", "topic": "AevalWhen de WINDOW.PRG", "username": "Rossine" } ]	AevalWhen de WINDOW.PRG
[ { "date": "2013-04-29", "forum": "FiveWin for Harbour/xHarbour", "text": "Hello,\n\nI need the new object-position afer move ( NO resize ) from inside a dialog.\nI want to move the SAYS, to find the best textcolors in relation to the gradient.\nThe return-values are wrong. My test :\n\n[color=#0000FF:1oi2ht5n][b:1oi2ht5n]oSay1:bMoved := {\|\| ( nTxtTop1 := oSay1:nTop, nTxtLeft1 := oSay1:nLeft ) }\noSay2:bMoved := {\|\| ( nTxtTop2 := oSay2:nTop, nTxtLeft2 := oSay1:nLef2 ) }\noSay3:bMoved := {\|\| ( nTxtTop3 := oSay3:nTop, nTxtLeft3 := oSay1:nLef3 ) }[/b:1oi2ht5n][/color:1oi2ht5n]\n\n[img:1oi2ht5n]http://www.pflegeplus.com/pictures/OMove1.jpg[/img:1oi2ht5n]\n\n[size=150:1oi2ht5n]I only moved to LEFT with the same TOP[/size:1oi2ht5n]\nA left mouseclick shows the values.\n\n[img:1oi2ht5n]http://www.pflegeplus.com/pictures/OMove2.jpg[/img:1oi2ht5n]\n\nThe Top / Left of the 3 says are STATIC\nThe new values after MOVE I have to save.\n\nnTxtTop1, nTxtLeft1 \nnTxtTop2, nTxtLeft2 \nnTxtTop3, nTxtLeft3 \n\n[code=fw:1oi2ht5n]<div class=\"fw\" id=\"{CB}\" style=\"font-family: monospace;\"><br /><span style=\"color: #00C800;\">FUNCTION</span> SHOW_DLG<span style=\"color: #000000;\">(</span> oWnd <span style=\"color: #000000;\">)</span><br /><span style=\"color: #00C800;\">LOCAL</span> oBtn30, nRadio1 := <span style=\"color: #000000;\">1</span>, lCheck1 := .T.<br /><span style=\"color: #00C800;\">LOCAL</span> oSay1, oSay2, oSay3, oRadio1, oCheck1<br /><span style=\"color: #00C800;\">LOCAL</span> oSlide, oSlide1, oSlide2, oSlide3<br /><span style=\"color: #00C800;\">LOCAL</span> nVar1 := <span style=\"color: #000000;\">150</span>, nVar2 := <span style=\"color: #000000;\">100</span>, nVar3 := <span style=\"color: #000000;\">150</span><br /><br />lGDialog := .T.<br /><br /><span style=\"color: #0000ff;\">DEFINE</span> <span style=\"color: #0000ff;\">DIALOG</span> oGDialog <span style=\"color: #0000ff;\">FROM</span> nDlgTop, nDlgLeft <span style=\"color: #0000ff;\">TO</span> nDlgHeight, nDlgWidth <span style=\"color: #0000ff;\">OF</span> oWnd <span style=\"color: #0000ff;\">PIXEL</span> ;<br /><span style=\"color: #0000ff;\">TITLE</span> <span style=\"color: #ff0000;\">\"Dialog GRADIENT\"</span><br /><br />oGDialog:<span style=\"color: #000000;\">bLClicked</span> := <span style=\"color: #000000;\">{</span>\|\| MsgAlert<span style=\"color: #000000;\">(</span> ;<br /> <span style=\"color: #ff0000;\">\"Dialog Top / Left / Width / Height : \"</span> + ALLTRIM<span style=\"color: #000000;\">(</span>STR<span style=\"color: #000000;\">(</span>oGDialog:<span style=\"color: #000000;\">nTop</span><span style=\"color: #000000;\">)</span><span style=\"color: #000000;\">)</span> + <span style=\"color: #ff0000;\">\" / \"</span> + ALLTRIM<span style=\"color: #000000;\">(</span>STR<span style=\"color: #000000;\">(</span>oGDialog:<span style=\"color: #000000;\">nLeft</span><span style=\"color: #000000;\">)</span><span style=\"color: #000000;\">)</span> + <span style=\"color: #ff0000;\">\" / \"</span> + ;<br /> ALLTRIM<span style=\"color: #000000;\">(</span>STR<span style=\"color: #000000;\">(</span>oGDialog:<span style=\"color: #000000;\">nWidth</span><span style=\"color: #000000;\">)</span><span style=\"color: #000000;\">)</span> + <span style=\"color: #ff0000;\">\" / \"</span> + ALLTRIM<span style=\"color: #000000;\">(</span>STR<span style=\"color: #000000;\">(</span>oGDialog:<span style=\"color: #000000;\">nHeight</span><span style=\"color: #000000;\">)</span><span style=\"color: #000000;\">)</span> + CRLF + ;<br /> <span style=\"color: #ff0000;\">\"Top / Left 1 : \"</span> + ALLTRIM<span style=\"color: #000000;\">(</span>STR<span style=\"color: #000000;\">(</span>nTxtTop1<span style=\"color: #000000;\">)</span><span style=\"color: #000000;\">)</span> + <span style=\"color: #ff0000;\">\" / \"</span> + ALLTRIM<span style=\"color: #000000;\">(</span>STR<span style=\"color: #000000;\">(</span>nTxtLeft1<span style=\"color: #000000;\">)</span><span style=\"color: #000000;\">)</span> + CRLF + ;<br /> <span style=\"color: #ff0000;\">\"Top / Left 2 : \"</span> + ALLTRIM<span style=\"color: #000000;\">(</span>STR<span style=\"color: #000000;\">(</span>nTxtTop2<span style=\"color: #000000;\">)</span><span style=\"color: #000000;\">)</span> + <span style=\"color: #ff0000;\">\" / \"</span> + ALLTRIM<span style=\"color: #000000;\">(</span>STR<span style=\"color: #000000;\">(</span>nTxtLeft2<span style=\"color: #000000;\">)</span><span style=\"color: #000000;\">)</span> + CRLF + ;<br /> <span style=\"color: #ff0000;\">\"Top / Left 3 : \"</span> + ALLTRIM<span style=\"color: #000000;\">(</span>STR<span style=\"color: #000000;\">(</span>nTxtTop3<span style=\"color: #000000;\">)</span><span style=\"color: #000000;\">)</span> + <span style=\"color: #ff0000;\">\" / \"</span> + ALLTRIM<span style=\"color: #000000;\">(</span>STR<span style=\"color: #000000;\">(</span>nTxtLeft3<span style=\"color: #000000;\">)</span><span style=\"color: #000000;\">)</span>, <span style=\"color: #ff0000;\">\"TextPosition\"</span> <span style=\"color: #000000;\">)</span> <span style=\"color: #000000;\">}</span><br /><br />@ <span style=\"color: #000000;\">10</span>, <span style=\"color: #000000;\">5</span> <span style=\"color: #0000ff;\">RADIO</span> oRadio1 <span style=\"color: #0000ff;\">VAR</span> nRadio1 <span style=\"color: #0000ff;\">OF</span> oGDialog <span style=\"color: #0000ff;\">PIXEL</span> ;<br /><span style=\"color: #0000ff;\">ITEMS</span> <span style=\"color: #ff0000;\">\"Option &1\"</span>, <span style=\"color: #ff0000;\">\"Option &2\"</span> _3D <span style=\"color: #0000ff;\">SIZE</span> <span style=\"color: #000000;\">70</span>, <span style=\"color: #000000;\">15</span> <span style=\"color: #0000ff;\">COLOR</span> nWColorT1 ; <span style=\"color: #B900B9;\">// 16443068 ;</span><br />HELPID <span style=\"color: #000000;\">100</span>, <span style=\"color: #000000;\">101</span> ;<br /><span style=\"color: #0000ff;\">ON</span> <span style=\"color: #0000ff;\">CHANGE</span> MsgBeep<span style=\"color: #000000;\">(</span><span style=\"color: #000000;\">)</span><br />oRadio1:<span style=\"color: #000000;\">SetFont</span><span style=\"color: #000000;\">(</span> oFont <span style=\"color: #000000;\">)</span><br />AEval<span style=\"color: #000000;\">(</span> oRadio1:<span style=\"color: #000000;\">aItems</span>, <span style=\"color: #000000;\">{</span> \| oRad \| oRad:<span style=\"color: #000000;\">lTransparent</span> := .T. <span style=\"color: #000000;\">}</span> <span style=\"color: #000000;\">)</span><br /><br />@ <span style=\"color: #000000;\">40</span>, <span style=\"color: #000000;\">10</span> <span style=\"color: #0000ff;\">CHECKBOX</span> oCheck1 <span style=\"color: #0000ff;\">VAR</span> lCheck1 <span style=\"color: #0000ff;\">COLOR</span> nWColorT1 <span style=\"color: #0000ff;\">PIXEL</span> ;<br /><span style=\"color: #0000ff;\">PROMPT</span> <span style=\"color: #ff0000;\">\"&ClickMe\"</span> <span style=\"color: #0000ff;\">OF</span> oGDialog <span style=\"color: #0000ff;\">SIZE</span> <span style=\"color: #000000;\">80</span>, <span style=\"color: #000000;\">15</span> ;<br /><span style=\"color: #0000ff;\">ON</span> <span style=\"color: #0000ff;\">CHANGE</span> oCheck1:<span style=\"color: #000000;\">SetText</span><span style=\"color: #000000;\">(</span> <span style=\"color: #ff0000;\">\"New Text\"</span> <span style=\"color: #000000;\">)</span> <br />oCheck1:<span style=\"color: #000000;\">lTransparent</span> := .T. <br />oCheck1:<span style=\"color: #000000;\">SetFont</span><span style=\"color: #000000;\">(</span> oFont <span style=\"color: #000000;\">)</span><br /><br /><span style=\"color: #B900B9;\">// ---------------------------</span><br /><br />@ nTxtTop1, nTxtLeft1 <span style=\"color: #0000ff;\">SAY</span> oSay1 <span style=\"color: #0000ff;\">PROMPT</span> <span style=\"color: #ff0000;\">\"Transparent Say\"</span> + CRLF + ;<br /> <span style=\"color: #ff0000;\">\"of Gradient 1\"</span> ;<br /><span style=\"color: #0000ff;\">OF</span> oGDialog <span style=\"color: #0000ff;\">SIZE</span> <span style=\"color: #000000;\">90</span>, <span style=\"color: #000000;\">30</span> <span style=\"color: #0000ff;\">FONT</span> oFont2 <span style=\"color: #0000ff;\">PIXEL</span> <br />oSay1:<span style=\"color: #000000;\">bMoved</span> := <span style=\"color: #000000;\">{</span>\|\| <span style=\"color: #000000;\">(</span> nTxtTop1 := oSay1:<span style=\"color: #000000;\">nTop</span>, nTxtLeft1 := oSay1:<span style=\"color: #000000;\">nLeft</span> <span style=\"color: #000000;\">)</span> <span style=\"color: #000000;\">}</span><br />oSay1:<span style=\"color: #000000;\">SetColor</span><span style=\"color: #000000;\">(</span> nWColorT1, <span style=\"color: #000000;\">)</span><br />oSay1:<span style=\"color: #000000;\">lTransparent</span> := .T.<br />oSay1:<span style=\"color: #000000;\">lDrag</span> := .T.<br /><br />@ nTxtTop2, nTxtLeft2 <span style=\"color: #0000ff;\">SAY</span> oSay2 <span style=\"color: #0000ff;\">PROMPT</span> <span style=\"color: #ff0000;\">\"Transparent Say\"</span> + CRLF + ;<br /> <span style=\"color: #ff0000;\">\"of Gradient 2\"</span> ;<br /><span style=\"color: #0000ff;\">OF</span> oGDialog <span style=\"color: #0000ff;\">SIZE</span> <span style=\"color: #000000;\">90</span>, <span style=\"color: #000000;\">30</span> <span style=\"color: #0000ff;\">FONT</span> oFont2 <span style=\"color: #0000ff;\">PIXEL</span> <br />oSay2:<span style=\"color: #000000;\">bMoved</span> := <span style=\"color: #000000;\">{</span>\|\| <span style=\"color: #000000;\">(</span> nTxtTop2 := oSay2:<span style=\"color: #000000;\">nTop</span>, nTxtLeft2 := oSay2:<span style=\"color: #000000;\">nLeft</span> <span style=\"color: #000000;\">)</span> <span style=\"color: #000000;\">}</span><br />oSay2:<span style=\"color: #000000;\">SetColor</span><span style=\"color: #000000;\">(</span> nWColorT2, <span style=\"color: #000000;\">)</span><br />oSay2:<span style=\"color: #000000;\">lTransparent</span> := .T.<br />oSay2:<span style=\"color: #000000;\">lDrag</span> := .T.<br /><br />@ nTxtTop3, nTxtLeft3 <span style=\"color: #0000ff;\">SAY</span> oSay3 <span style=\"color: #0000ff;\">PROMPT</span> <span style=\"color: #ff0000;\">\"Transparent Say\"</span> + CRLF + ;<br /> <span style=\"color: #ff0000;\">\"of Bottom Color\"</span> ;<br /><span style=\"color: #0000ff;\">OF</span> oGDialog <span style=\"color: #0000ff;\">SIZE</span> <span style=\"color: #000000;\">90</span>, <span style=\"color: #000000;\">30</span> <span style=\"color: #0000ff;\">FONT</span> oFont2 <span style=\"color: #0000ff;\">PIXEL</span> <br />oSay3:<span style=\"color: #000000;\">bMoved</span> := <span style=\"color: #000000;\">{</span>\|\| <span style=\"color: #000000;\">(</span> nTxtTop3 := oSay3:<span style=\"color: #000000;\">nTop</span>, nTxtLeft3 := oSay3:<span style=\"color: #000000;\">nLeft</span> <span style=\"color: #000000;\">)</span> <span style=\"color: #000000;\">}</span><br />oSay3:<span style=\"color: #000000;\">SetColor</span><span style=\"color: #000000;\">(</span> nWColorT3, <span style=\"color: #000000;\">)</span><br />oSay3:<span style=\"color: #000000;\">lTransparent</span> := .T.<br />oSay3:<span style=\"color: #000000;\">lDrag</span> := .T.<br /><br /><span style=\"color: #0000ff;\">ACTIVATE</span> <span style=\"color: #0000ff;\">DIALOG</span> oGDialog <span style=\"color: #0000ff;\">NOWAIT</span> ;<br /><span style=\"color: #0000ff;\">ON</span> <span style=\"color: #0000ff;\">INIT</span> <span style=\"color: #000000;\">(</span> DisableX<span style=\"color: #000000;\">(</span>oGDialog, .T.<span style=\"color: #000000;\">)</span>, ;<br /> GRADBRUSH<span style=\"color: #000000;\">(</span> oGDialog, nTop1, nBottom1, lWDirect1, ; <span style=\"color: #B900B9;\">// Top, Bottom 1</span><br /> nTop2, nBottom2, lWDirect2, ; <span style=\"color: #B900B9;\">// Top, Bottom 2</span><br /> nTop3, nBottom3 <span style=\"color: #000000;\">)</span> <span style=\"color: #000000;\">)</span> <span style=\"color: #B900B9;\">// Top, Bottom 3</span><br /> <br /><span style=\"color: #00C800;\">RETURN</span> <span style=\"color: #00C800;\">NIL</span><br /> </div>[/code:1oi2ht5n]\n\nBest Regards\nUwe <!-- s:?: --><img src=\"{SMILIES_PATH}/icon_question.gif\" alt=\":?:\" title=\"Question\" /><!-- s:?: -->", "time": "20:11", "topic": "After object MOVE wrong position-return-values ?", "username": "ukoenig" } ]	After object MOVE wrong position-return-values ?
[ { "date": "2013-04-30", "forum": "FiveWin for Harbour/xHarbour", "text": "Mr Ukoenig,\n\nUse oWnd:CoorsUpdate() after oWnd object movement.\n\nRegards", "time": "08:28", "topic": "After object MOVE wrong position-return-values ?", "username": "Antonio Mart." } ]	After object MOVE wrong position-return-values ?
[ { "date": "2009-02-18", "forum": "FiveWin for Harbour/xHarbour", "text": "To All\n\nI am going nuts here trying to figure out why when I run a simple report from a modal dialog several dialogs deep .. when the report previewer comes up .. the previewer goes behind all my dialogs .. \n\nI do not want my dialogs to come to the forefront .. I want them to stay behind the previewer until it is closed. I have remmed out the MDIchild clause in rpreview \n\n[code=fw:2l5ryixk]<div class=\"fw\" id=\"{CB}\" style=\"font-family: monospace;\"><br /> <span style=\"color: #00C800;\">if</span> ::<span style=\"color: #000000;\">oWndMain</span> != <span style=\"color: #00C800;\">nil</span> .and. Upper<span style=\"color: #000000;\">(</span> ::<span style=\"color: #000000;\">oWndMain</span>:<span style=\"color: #000000;\">ClassName</span><span style=\"color: #000000;\">(</span><span style=\"color: #000000;\">)</span> <span style=\"color: #000000;\">)</span> == <span style=\"color: #ff0000;\">\"TMDIFRAME\"</span><br /> <span style=\"color: #0000ff;\">DEFINE</span> <span style=\"color: #0000ff;\">WINDOW</span> ::<span style=\"color: #000000;\">oWnd</span> ;<br /> <span style=\"color: #0000ff;\">TITLE</span> cTitle ;<br /> <span style=\"color: #0000ff;\">COLOR</span> CLR_BLACK,CLR_LIGHTGRAY ;<br /> <span style=\"color: #0000ff;\">ICON</span> oIcon ;<br /> <span style=\"color: #0000ff;\">VSCROLL</span> <span style=\"color: #0000ff;\">HSCROLL</span> <span style=\"color: #B900B9;\">// MDICHILD</span><br /> <span style=\"color: #00C800;\">else</span><br /> <span style=\"color: #0000ff;\">DEFINE</span> <span style=\"color: #0000ff;\">WINDOW</span> ::<span style=\"color: #000000;\">oWnd</span> <span style=\"color: #0000ff;\">FROM</span> <span style=\"color: #000000;\">0</span>, <span style=\"color: #000000;\">0</span> <span style=\"color: #0000ff;\">TO</span> <span style=\"color: #000000;\">24</span>, <span style=\"color: #000000;\">80</span> ;<br /> <span style=\"color: #0000ff;\">TITLE</span> cTitle ;<br /> <span style=\"color: #0000ff;\">COLOR</span> CLR_BLACK,CLR_LIGHTGRAY ;<br /> <span style=\"color: #0000ff;\">ICON</span> oIcon ;<br /> <span style=\"color: #0000ff;\">VSCROLL</span> <span style=\"color: #0000ff;\">HSCROLL</span> <span style=\"color: #0000ff;\">MENU</span> ::<span style=\"color: #000000;\">BuildMenu</span><span style=\"color: #000000;\">(</span><span style=\"color: #000000;\">)</span><br /> <span style=\"color: #00C800;\">endif</span><br /><br /> </div>[/code:2l5ryixk]\n\nand still when the previewer comes up .. all my dialogs take the forground and I have to close all of them before I can get to the previewer ..\n\nHere is my code from the report\n\n[code=fw:2l5ryixk]<div class=\"fw\" id=\"{CB}\" style=\"font-family: monospace;\"><br /><span style=\"color: #00C800;\">STATIC</span> oDLG<br /><br /><span style=\"color: #00D7D7;\">#INCLUDE</span> <span style=\"color: #ff0000;\">\"FIVEWIN.CH\"</span><br /><br /><span style=\"color: #B900B9;\">//----------------------</span><br />Func _GenLett<span style=\"color: #000000;\">(</span> cLETTEREID, cMODE, lGEN, dDATE_SENT, oRsCert <span style=\"color: #000000;\">)</span><br /><br /><span style=\"color: #00C800;\">LOCAL</span> mVIEW, lOK<br /><br />lOK := .F.<br />mVIEW := <span style=\"color: #ff0000;\">\"V\"</span><br /><br /><span style=\"color: #0000ff;\">DEFINE</span> <span style=\"color: #0000ff;\">DIALOG</span> oDlg <span style=\"color: #0000ff;\">RESOURCE</span> <span style=\"color: #ff0000;\">\"GENLETT\"</span> ;<br /> <span style=\"color: #0000ff;\">TITLE</span> <span style=\"color: #ff0000;\">\"AUTOMATED Letter Print routine\"</span> ;<br /><br /> <span style=\"color: #0000ff;\">REDEFINE</span> GET mVIEW <span style=\"color: #0000ff;\">ID</span> <span style=\"color: #000000;\">117</span> <span style=\"color: #0000ff;\">of</span> oDlg PICTURE <span style=\"color: #ff0000;\">\"@!\"</span>;<br /> <span style=\"color: #0000ff;\">valid</span> mVIEW $ <span style=\"color: #ff0000;\">'PV'</span> <span style=\"color: #0000ff;\">UPDATE</span><br /><br /> <span style=\"color: #0000ff;\">REDEFINE</span> <span style=\"color: #0000ff;\">BUTTON</span> oBTN1 <span style=\"color: #0000ff;\">ID</span> <span style=\"color: #000000;\">111</span> ;<br /> <span style=\"color: #0000ff;\">ACTION</span> <span style=\"color: #000000;\">(</span> lOK := _doit<span style=\"color: #000000;\">(</span> cLETTEREID, cMODE, lGEN, dDATE_SENT, oRsCert, mVIEW <span style=\"color: #000000;\">)</span><span style=\"color: #000000;\">)</span><br /><br /> <span style=\"color: #0000ff;\">REDEFINE</span> <span style=\"color: #0000ff;\">BUTTON</span> oBTN2 <span style=\"color: #0000ff;\">ID</span> <span style=\"color: #000000;\">112</span> ;<br /> <span style=\"color: #0000ff;\">ACTION</span> <span style=\"color: #000000;\">(</span> oDLG:<span style=\"color: #000000;\">End</span><span style=\"color: #000000;\">(</span><span style=\"color: #000000;\">)</span> <span style=\"color: #000000;\">)</span><br /><br /><span style=\"color: #0000ff;\">ACTIVATE</span> <span style=\"color: #0000ff;\">DIALOG</span> oDlg<br /><br /><span style=\"color: #00C800;\">RETURN</span><span style=\"color: #000000;\">(</span>lOK <span style=\"color: #000000;\">)</span><br /><br /><span style=\"color: #B900B9;\">//------------------------</span><br /><span style=\"color: #00C800;\">Static</span> Func _Doit<span style=\"color: #000000;\">(</span> cLETTEREID, cMODE, lGEN, dDATE_SENT, oRsCert, mVIEW <span style=\"color: #000000;\">)</span><br /><br /><span style=\"color: #00C800;\">LOCAL</span> SAYING,oPRINT, oFONT, cTEXT<br /><span style=\"color: #00C800;\">LOCAL</span> oRsLett, cSQL, oERR, cDEFA,cTITLE<br /><br /><span style=\"color: #00C800;\">IF</span> empty<span style=\"color: #000000;\">(</span> cLETTEREID <span style=\"color: #000000;\">)</span> .or. cLETTEREID = <span style=\"color: #ff0000;\">\"BOGUS\"</span><br /> SAYING := <span style=\"color: #ff0000;\">\"There were no parameters for the Letter EID\"</span><br /> MsgInfo<span style=\"color: #000000;\">(</span> SAYING <span style=\"color: #000000;\">)</span><br /> oDlg:<span style=\"color: #000000;\">End</span><span style=\"color: #000000;\">(</span><span style=\"color: #000000;\">)</span><br /> <span style=\"color: #00C800;\">RETURN</span><span style=\"color: #000000;\">(</span>.F.<span style=\"color: #000000;\">)</span><br /><span style=\"color: #00C800;\">ENDIF</span><br /><br /><span style=\"color: #00C800;\">IF</span> lGEN = .F.<br /> SAYING := <span style=\"color: #ff0000;\">\"The lGen parameters resolved to FALSE\"</span><br /> MsgInfo<span style=\"color: #000000;\">(</span> SAYING <span style=\"color: #000000;\">)</span><br /> oDlg:<span style=\"color: #000000;\">End</span><span style=\"color: #000000;\">(</span><span style=\"color: #000000;\">)</span><br /> <span style=\"color: #00C800;\">RETURN</span><span style=\"color: #000000;\">(</span>.F.<span style=\"color: #000000;\">)</span><br /><span style=\"color: #00C800;\">ENDIF</span><br /><br /><span style=\"color: #00C800;\">IF</span> empty<span style=\"color: #000000;\">(</span> dDATE_SENT <span style=\"color: #000000;\">)</span> .or. dDATE_SENT = CTOD<span style=\"color: #000000;\">(</span><span style=\"color: #ff0000;\">\"\"</span><span style=\"color: #000000;\">)</span><br /> SAYING := <span style=\"color: #ff0000;\">\"It appears there was not a Legacy date sent\"</span>+chr<span style=\"color: #000000;\">(</span><span style=\"color: #000000;\">10</span><span style=\"color: #000000;\">)</span><br /> SAYING += <span style=\"color: #ff0000;\">\"so there is nothing to Print or Re-print\"</span><br /> MsgInfo<span style=\"color: #000000;\">(</span> SAYING <span style=\"color: #000000;\">)</span><br /> oDlg:<span style=\"color: #000000;\">End</span><span style=\"color: #000000;\">(</span><span style=\"color: #000000;\">)</span><br /> <span style=\"color: #00C800;\">RETURN</span><span style=\"color: #000000;\">(</span>.F.<span style=\"color: #000000;\">)</span><br /><span style=\"color: #00C800;\">ENDIF</span><br /><br /><span style=\"color: #00C800;\">IF</span> cMODE = <span style=\"color: #ff0000;\">\"R\"</span><br /> cTITLE := <span style=\"color: #ff0000;\">\"RE-Generating letter\"</span><br /><span style=\"color: #00C800;\">ELSE</span><br /> cTITLE := <span style=\"color: #ff0000;\">\"Creating Letter\"</span><br /><span style=\"color: #00C800;\">ENDIF</span><br /><br />oRsLett := TOleAuto<span style=\"color: #000000;\">(</span><span style=\"color: #000000;\">)</span>:<span style=\"color: #00C800;\">New</span><span style=\"color: #000000;\">(</span> <span style=\"color: #ff0000;\">\"ADODB.Recordset\"</span> <span style=\"color: #000000;\">)</span><br />oRsLett:<span style=\"color: #000000;\">CursorType</span> := <span style=\"color: #000000;\">1</span> <span style=\"color: #B900B9;\">// opendkeyset</span><br />oRsLett:<span style=\"color: #000000;\">CursorLocation</span> := <span style=\"color: #000000;\">3</span> <span style=\"color: #B900B9;\">// local cache</span><br />oRsLett:<span style=\"color: #000000;\">LockType</span> := <span style=\"color: #000000;\">3</span> <span style=\"color: #B900B9;\">// lockoportunistic</span><br /><br />cSQL := <span style=\"color: #ff0000;\">\"SELECT * FROM LETTERS where LETTEREID = '\"</span>+cLETTEREID+<span style=\"color: #ff0000;\">\"'\"</span><br /><br /><span style=\"color: #00C800;\">TRY</span><br /> oRsLett:<span style=\"color: #000000;\">Open</span><span style=\"color: #000000;\">(</span> cSQL,<span style=\"color: #ff0000;\">'Provider='</span>+xPROVIDER+<span style=\"color: #ff0000;\">';Data Source='</span>+xSOURCE+<span style=\"color: #ff0000;\">';Initial Catalog='</span>+xCATALOG+<span style=\"color: #ff0000;\">';User Id='</span>+xUSERID+<span style=\"color: #ff0000;\">';Password='</span>+xPASSWORD <span style=\"color: #000000;\">)</span><br />CATCH oErr<br /> MsgInfo<span style=\"color: #000000;\">(</span> <span style=\"color: #ff0000;\">\"Error in Opening LETTERS table\"</span> <span style=\"color: #000000;\">)</span><br /> oDlg:<span style=\"color: #000000;\">End</span><span style=\"color: #000000;\">(</span><span style=\"color: #000000;\">)</span><br /> <span style=\"color: #00C800;\">RETURN</span><span style=\"color: #000000;\">(</span>.F.<span style=\"color: #000000;\">)</span><br />END <span style=\"color: #00C800;\">TRY</span><br /><br /><span style=\"color: #00C800;\">IF</span> oRsLett:<span style=\"color: #000000;\">eof</span><br /> oRsLett:<span style=\"color: #000000;\">Close</span><span style=\"color: #000000;\">(</span><span style=\"color: #000000;\">)</span><br /> SAYING := <span style=\"color: #ff0000;\">\"Sorry .. there is not any Letters associated with this Task\"</span><br /> MsgInfo<span style=\"color: #000000;\">(</span> saying <span style=\"color: #000000;\">)</span><br /> oDlg:<span style=\"color: #000000;\">End</span><span style=\"color: #000000;\">(</span><span style=\"color: #000000;\">)</span><br /> <span style=\"color: #00C800;\">RETURN</span><span style=\"color: #000000;\">(</span>.F.<span style=\"color: #000000;\">)</span><br /><span style=\"color: #00C800;\">ENDIF</span><br /><br /><span style=\"color: #00C800;\">IF</span> mVIEW = <span style=\"color: #ff0000;\">\"V\"</span><br /> <span style=\"color: #0000ff;\">PRINTER</span> oPRINT <span style=\"color: #0000ff;\">FROM</span> USER ;<br /> PREVIEW ;<br /> <span style=\"color: #0000ff;\">NAME</span> cTITLE+<span style=\"color: #ff0000;\">\" for \"</span>+xLOGIN<br /><br /><span style=\"color: #00C800;\">ELSE</span><br /><br /> <span style=\"color: #0000ff;\">PRINTER</span> oPRINT <span style=\"color: #0000ff;\">from</span> USER ;<br /> <span style=\"color: #0000ff;\">NAME</span> cTITLE+<span style=\"color: #ff0000;\">\" for \"</span>+xLOGIN<br /><br /> <span style=\"color: #00C800;\">IF</span> EMPTY<span style=\"color: #000000;\">(</span> oPRINT:<span style=\"color: #000000;\">hDC</span> <span style=\"color: #000000;\">)</span><br /> MsgStop <span style=\"color: #000000;\">(</span> <span style=\"color: #ff0000;\">\"Printer not Ready !\"</span> <span style=\"color: #000000;\">)</span><br /> oDlg:<span style=\"color: #000000;\">End</span><span style=\"color: #000000;\">(</span><span style=\"color: #000000;\">)</span><br /> <span style=\"color: #00C800;\">RETURN</span><span style=\"color: #000000;\">(</span>.F.<span style=\"color: #000000;\">)</span><br /> <span style=\"color: #00C800;\">ENDIF</span><br /><br /><span style=\"color: #00C800;\">ENDIF</span><br /><br />SysReFresh<span style=\"color: #000000;\">(</span><span style=\"color: #000000;\">)</span><br />CursorWait<span style=\"color: #000000;\">(</span><span style=\"color: #000000;\">)</span><br /><br />cTEXT := oRsLett:<span style=\"color: #000000;\">Fields</span><span style=\"color: #000000;\">(</span><span style=\"color: #ff0000;\">\"letter_text\"</span><span style=\"color: #000000;\">)</span>:<span style=\"color: #000000;\">Value</span><br />oRsLett:<span style=\"color: #000000;\">Close</span><span style=\"color: #000000;\">(</span><span style=\"color: #000000;\">)</span><br /><br />oPRINT:<span style=\"color: #000000;\">lPrvModal</span>:= .T.<br /><br /><span style=\"color: #0000ff;\">DEFINE</span> <span style=\"color: #0000ff;\">FONT</span> oFont <span style=\"color: #0000ff;\">NAME</span> <span style=\"color: #ff0000;\">\"Courier New\"</span> <span style=\"color: #0000ff;\">SIZE</span> <span style=\"color: #000000;\">0</span>,<span style=\"color: #000000;\">-10</span> BOLD <span style=\"color: #0000ff;\">of</span> oPRINT <span style=\"color: #B900B9;\">// SIZE 10 -40</span><br /><br />oPRINT:<span style=\"color: #000000;\">StartPage</span><span style=\"color: #000000;\">(</span><span style=\"color: #000000;\">)</span><br /><br />cDEFA := SET<span style=\"color: #000000;\">(</span><span style=\"color: #000000;\">7</span><span style=\"color: #000000;\">)</span><br /><span style=\"color: #00C800;\">IF</span> FILE<span style=\"color: #000000;\">(</span> cDEFA+<span style=\"color: #ff0000;\">\"<span style=\"color: #000000;\">\\A</span>GENCY.BMP\"</span> <span style=\"color: #000000;\">)</span><br /> oPRINT:<span style=\"color: #000000;\">SayBitMap</span><span style=\"color: #000000;\">(</span> <span style=\"color: #000000;\">10</span>,<span style=\"color: #000000;\">1000</span>, cDEFA+<span style=\"color: #ff0000;\">\"<span style=\"color: #000000;\">\\A</span>GENCY.BMP\"</span>, <span style=\"color: #000000;\">600</span>,<span style=\"color: #000000;\">600</span> <span style=\"color: #000000;\">)</span> <span style=\"color: #B900B9;\">//800,500</span><br /><span style=\"color: #00C800;\">ENDIF</span><br /><br />oPRINT:<span style=\"color: #0000ff;\">EndPage</span><span style=\"color: #000000;\">(</span><span style=\"color: #000000;\">)</span><br />CursorArrow<span style=\"color: #000000;\">(</span><span style=\"color: #000000;\">)</span><br /><br />OdLG:<span style=\"color: #000000;\">END</span><span style=\"color: #000000;\">(</span><span style=\"color: #000000;\">)</span><br /><br /><span style=\"color: #00C800;\">IF</span> mVIEW = <span style=\"color: #ff0000;\">'V'</span><br /> oPRINT:<span style=\"color: #000000;\">Preview</span><span style=\"color: #000000;\">(</span><span style=\"color: #000000;\">)</span><br /><span style=\"color: #00C800;\">ELSE</span><br /> PrintEnd<span style=\"color: #000000;\">(</span><span style=\"color: #000000;\">)</span><br /><span style=\"color: #00C800;\">ENDIF</span><br /><br />oFONT:<span style=\"color: #000000;\">END</span><span style=\"color: #000000;\">(</span><span style=\"color: #000000;\">)</span><br /><span style=\"color: #0000ff;\">RELEASE</span> <span style=\"color: #0000ff;\">FONT</span> oFont<br /><br /><span style=\"color: #00C800;\">RETURN</span><span style=\"color: #000000;\">(</span>.T.<span style=\"color: #000000;\">)</span><br /><br /><span style=\"color: #B900B9;\">// end GennLett.prg</span><br /> </div>[/code:2l5ryixk]", "time": "23:12", "topic": "After report runs all my dialogs appear", "username": "Rick Lipkin" } ]	After report runs all my dialogs appear
[ { "date": "2009-02-19", "forum": "FiveWin for Harbour/xHarbour", "text": "Rick,\n\nYou should specify the window container of the first dialog so they will not go foreground:\n[code=fw:8m3n8fha]<div class=\"fw\" id=\"{CB}\" style=\"font-family: monospace;\"><span style=\"color: #0000ff;\">DEFINE</span> <span style=\"color: #0000ff;\">DIALOG</span> oDlg <span style=\"color: #0000ff;\">RESOURCE</span> <span style=\"color: #ff0000;\">\"GENLETT\"</span> ;<br /> <span style=\"color: #0000ff;\">TITLE</span> <span style=\"color: #ff0000;\">\"AUTOMATED Letter Print routine\"</span> ;<br /> <span style=\"color: #0000ff;\">OF</span> oWndMain<br /> </div>[/code:8m3n8fha]\nwhere oWndMain is your main window.\n\nAlso you modification in rpreview.prg is fine. We need to set a parameter for this, so there is no need to modify it in the future.\n\nPlease try it and let me know how it goes, thanks", "time": "12:14", "topic": "After report runs all my dialogs appear", "username": "Antonio Linares" } ]	After report runs all my dialogs appear
[ { "date": "2009-02-20", "forum": "FiveWin for Harbour/xHarbour", "text": "Antonio\n\nI made sure I passed the main MDI Window object to all child process and dialogs down to the print routine .. still having the same problem when the previewer comes up .. all my dialogs come to the forefront and I have to close them all to get to the preview .. <!-- s:cry: --><img src=\"{SMILIES_PATH}/icon_cry.gif\" alt=\":cry:\" title=\"Crying or Very sad\" /><!-- s:cry: --> \n\nIf I just send the job to the printer without envoking rpreview .. I am fine .. however, I would prefer letting the user see the document first before printing ..\n\nAny other thoughts ?\n\nRick Lipkin", "time": "15:59", "topic": "After report runs all my dialogs appear", "username": "Rick Lipkin" } ]	After report runs all my dialogs appear
[ { "date": "2009-02-20", "forum": "FiveWin for Harbour/xHarbour", "text": "Rick,\n\nPlease post a screenshot, thanks", "time": "18:39", "topic": "After report runs all my dialogs appear", "username": "Antonio Linares" } ]	After report runs all my dialogs appear
[ { "date": "2009-02-20", "forum": "FiveWin for Harbour/xHarbour", "text": "Antonio\n\nI do not have access to any external file hosting sites .. ( blocked at work) .. I will send it to your private e-mail.\n\nRick", "time": "19:34", "topic": "After report runs all my dialogs appear", "username": "Rick Lipkin" } ]	After report runs all my dialogs appear
[ { "date": "2009-02-20", "forum": "FiveWin for Harbour/xHarbour", "text": "Rick,\n\nPerhaps this is a design issue. Normally dialogs have OK and Cancel buttons and when either button is pressed the dialog is closed. If you use this design then you will eliminate your problem.\n\nIf you wish to use a design where the dialog remains open, then the dialogs should be non-modal and perhaps this will fix your problem.\n\nI would use the first design.\n\nRegards,\nJames", "time": "19:36", "topic": "After report runs all my dialogs appear", "username": "James Bott" } ]	After report runs all my dialogs appear
[ { "date": "2009-02-20", "forum": "FiveWin for Harbour/xHarbour", "text": "James\n\nI have sent you the same private e-mail I sent Antonio .. I am using one MDI main menu which calls a child .. from there all the dialogs ascending are modal.\n\nSending the last two modules that go with it.\n\nLet me know if you see anything wrong ..\n\nThanks\nRick", "time": "20:20", "topic": "After report runs all my dialogs appear", "username": "Rick Lipkin" } ]	After report runs all my dialogs appear
[ { "date": "2009-02-20", "forum": "FiveWin for Harbour/xHarbour", "text": "Rick,\n \nThe preview window remains MDICHILD, thats why its placed behind the dialogs.\n \nYou may not have properly modified rpreview.prg", "time": "20:22", "topic": "After report runs all my dialogs appear", "username": "Antonio Linares" } ]	After report runs all my dialogs appear
[ { "date": "2009-02-20", "forum": "FiveWin for Harbour/xHarbour", "text": "Antonio\n\nYou won't believe this .. I modified rpreview and your msginfo showed up .. and after I closed the msginfo .. the preview worked perfect .. Damned strange .. \n\nApparently xMate even when rpreview.prg in the compile list .. did not compile the program .. perhaps a date attribute problem.. I took out the msgbox and everything works !! .. \n\nHad to be a date stamp problem on the file <!-- s:shock: --><img src=\"{SMILIES_PATH}/icon_eek.gif\" alt=\":shock:\" title=\"Shocked\" /><!-- s:shock: --> \n\nThanks for the help !!\n\nRick", "time": "20:43", "topic": "After report runs all my dialogs appear", "username": "Rick Lipkin" } ]	After report runs all my dialogs appear
[ { "date": "2009-02-20", "forum": "FiveWin for Harbour/xHarbour", "text": "Rick,\n\nglad to know it is solved <!-- s:-) --><img src=\"{SMILIES_PATH}/icon_smile.gif\" alt=\":-)\" title=\"Smile\" /><!-- s:-) -->", "time": "21:10", "topic": "After report runs all my dialogs appear", "username": "Antonio Linares" } ]	After report runs all my dialogs appear
[ { "date": "2009-02-20", "forum": "FiveWin for Harbour/xHarbour", "text": "To All\n\nHere is what the fix was .. for some reason Rpreview.prg was not getting compiled and linked into the application .. even though it is in the compile and link list.\n\nI had this very strange and wierd thing happen with another program I was working on .. I went in and re-named my project folder .. re-compiled and things worked ..\n\nIn this case .. there was nothing wrong with the code, design, dialogs, MDI object .. for some dumb odd reason .. Rpreview was just not being compiled and linked into my program.\n\nIt was Antonio that got me to realize this with the msginfo() in the rpreview code .. it just never fired .. but re-name the entire project folder and do a total re-compile .. and it works .. rename the folder back again .. recompile and Rpreview never gets linked in..\n\nAll I can say is there has to be a global variable in xMate that is not being evaluated correctly .. when I rename the folder .. everyting gets re-compiled along with rpreview.\n\nThanks for everyone support on this\n\nRick Lipkin", "time": "22:08", "topic": "After report runs all my dialogs appear", "username": "Rick Lipkin" } ]	After report runs all my dialogs appear
[ { "date": "2008-03-06", "forum": "FiveWin for Harbour/xHarbour", "text": "Antonio,\nI have this error at the opening, after update to version 8.02\n\nError BASE/1004 No exported method: GENCODE\nApplication\n===========\n Path and name: C:\\DEV\\facture\\facture.Exe (32 bits)\n Size: 1,963,520 bytes\n Time from start: 0 hours 0 mins 0 secs \n Error occurred at: 03/06/08, 15:22:13\n Error description: Error BASE/1004 No exported method: GENCODE\n Args:\n [ 1] = U \n\nStack Calls\n===========\n Called from GENCODE(0)\n Called from ERRORDIALOG(55)\n Called from (b)ERRORSYS(28)\n Called from THROW(77)\n\nSystem\n\nBCC,Harbour,fivewin 8.02\n\nPatrick Chalvet", "time": "06:46", "topic": "After update to 8.02", "username": "Tevlac" } ]	After update to 8.02
[ { "date": "2008-03-06", "forum": "FiveWin for Harbour/xHarbour", "text": "Patrick,\n\nWhat source code do you have at line 77 (and some lines before and after) ?\n\nDo you use a modified errorsys of your own ?", "time": "11:40", "topic": "After update to 8.02", "username": "Antonio Linares" } ]	After update to 8.02
[ { "date": "2008-03-07", "forum": "FiveWin for Harbour/xHarbour", "text": "Is version 8.02 working with last Harbour CVS?\n\nThrow() is a function of toleauto.\n\nI install harbour from your site, the source compile Ok but no window open when i start the exe. It just stay in memory\n\nPatrick", "time": "05:12", "topic": "After update to 8.02", "username": "Tevlac" } ]	After update to 8.02
[ { "date": "2008-03-07", "forum": "FiveWin for Harbour/xHarbour", "text": "Patrick,\n\nYou have to link gtgui.lib instead of gtwin.lib\n\nPlease try to build samples/tutor02.prg and see if it works for you.\n\nIf you show me your code around line 77 we may locate what is wrong, thanks", "time": "10:37", "topic": "After update to 8.02", "username": "Antonio Linares" } ]	After update to 8.02
[ { "date": "2011-04-14", "forum": "FiveWin for Harbour/xHarbour", "text": "Hi friends !\n\n Some time ago I asked about scripting and you helped me . I tried both versions Harbour and xHarbour . Harbour in this place is better - have hb_compileBuf() function . Sorry , but I have some places where I must use xHarbour . And don't know how to solve one problem. Here is source :\n\n[code=fw:3ihmldky]<div class=\"fw\" id=\"{CB}\" style=\"font-family: monospace;\"><br />...<br />      <span style=\"color: #00C800;\">if</span> lCompile         <br />         Compile<span style=\"color: #000000;\">(</span> cPrg <span style=\"color: #000000;\">)</span><br />      <span style=\"color: #00C800;\">endif</span><br />      <span style=\"color: #00C800;\">if</span> file<span style=\"color: #000000;\">(</span> cMain_prgs + cPrg + <span style=\"color: #ff0000;\">\".hrb\"</span> <span style=\"color: #000000;\">)</span><br />            __HrbRun<span style=\"color: #000000;\">(</span> cMain_prgs + cPrg + <span style=\"color: #ff0000;\">\".hrb\"</span> <span style=\"color: #000000;\">)</span><br />      <span style=\"color: #00C800;\">endif</span><br />...<br /><span style=\"color: #00C800;\">function</span> Compile<span style=\"color: #000000;\">(</span> cPrgName <span style=\"color: #000000;\">)</span><br />   <span style=\"color: #00C800;\">local</span> cCmd := cMain_path + <span style=\"color: #ff0000;\">\"harbour.exe \"</span> + cMain_prgs + cPrgName + ;<br />   <span style=\"color: #ff0000;\">\" /o\"</span> + cMain_prgs + <span style=\"color: #ff0000;\">\" /n /gh /ihrb_incl;fwh_incl\"</span><br />   WinExec<span style=\"color: #000000;\">(</span> cCmd, <span style=\"color: #000000;\">0</span> <span style=\"color: #000000;\">)</span><br />   <span style=\"color: #00C800;\">do</span> <span style=\"color: #00C800;\">while</span> !File<span style=\"color: #000000;\">(</span> cMain_prgs + cPrgName + <span style=\"color: #ff0000;\">\".hrb\"</span> <span style=\"color: #000000;\">)</span><br />      SysRefresh<span style=\"color: #000000;\">(</span><span style=\"color: #000000;\">)</span><br />   <span style=\"color: #00C800;\">enddo</span><br /><span style=\"color: #00C800;\">return</span><span style=\"color: #000000;\">(</span> <span style=\"color: #00C800;\">NIL</span> <span style=\"color: #000000;\">)</span><br /> </div>[/code:3ihmldky]\n\n The main problem is that if I did mistake in prg file , how to catch error from compiler and to view errors . With xHarbour compiler . I reviewed harbour.exe options and didn't find how to do output of compilation ... <!-- s:-( --><img src=\"{SMILIES_PATH}/icon_sad.gif\" alt=\":-(\" title=\"Sad\" /><!-- s:-( --> . Or didn't understand ... <!-- s:oops: --><img src=\"{SMILIES_PATH}/icon_redface.gif\" alt=\":oops:\" title=\"Embarassed\" /><!-- s:oops: --> \n\n With best regards and thanks in advance !", "time": "20:08", "topic": "Again about scripting - __HrbRun ...", "username": "Rimantas" } ]	Again about scripting - __HrbRun ...
[ { "date": "2013-03-08", "forum": "FiveWin for Harbour/xHarbour", "text": "Hi,\n\nI think that this question is for Antonio ... <!-- s:) --><img src=\"{SMILIES_PATH}/icon_smile.gif\" alt=\":)\" title=\"Smile\" /><!-- s:) --> . It was discusion about that in earlier . You helped me in that . \nThe problem is that with more complicated PRG with some functions inside it's not working . So I leaved this question and now I want to wake up it now . As for a sample :\n\n[code=fw:2s5l31qa]<div class=\"fw\" id=\"{CB}\" style=\"font-family: monospace;\"><br /><span style=\"color: #00D7D7;\">#include</span> <span style=\"color: #ff0000;\">\"tdolphin.ch\"</span><br /><span style=\"color: #00D7D7;\">#include</span> <span style=\"color: #ff0000;\">\"xbrowse.ch\"</span><br /><span style=\"color: #00D7D7;\">#include</span> <span style=\"color: #ff0000;\">\"fivewin.ch\"</span><br /><br /><span style=\"color: #B900B9;\">// external brw_menu2</span><br /><br /><span style=\"color: #00C800;\">function</span> script_test<span style=\"color: #000000;\">(</span><span style=\"color: #000000;\">)</span><br /><span style=\"color: #00C800;\">local</span> oWnd, oBrw, oQry, oCol<br /><span style=\"color: #00C800;\">local</span> cFld, cSql, cStr<br /><br />cSql := <span style=\"color: #ff0000;\">\"SELECT \"</span> + cFld + <span style=\"color: #ff0000;\">\" FROM uzsakym WHERE db='\"</span> + cDb_id + <span style=\"color: #ff0000;\">\"'\"</span><br />oQry := oServ:<span style=\"color: #000000;\">Query</span><span style=\"color: #000000;\">(</span> cSql <span style=\"color: #000000;\">)</span><br /><br /><span style=\"color: #0000ff;\">DEFINE</span> <span style=\"color: #0000ff;\">WINDOW</span> oWnd <span style=\"color: #0000ff;\">MDICHILD</span> <span style=\"color: #0000ff;\">OF</span> wndMain<span style=\"color: #000000;\">(</span><span style=\"color: #000000;\">)</span><br />    <br />@ <span style=\"color: #000000;\">0</span>, <span style=\"color: #000000;\">0</span> <span style=\"color: #0000ff;\">XBROWSE</span> oBrw <span style=\"color: #0000ff;\">OF</span> oWnd DATASOURCE oQry<br /><br />oBrw:<span style=\"color: #000000;\">nMarqueeStyle</span>          := MARQSTYLE_HIGHLCELL<br />oBrw:<span style=\"color: #000000;\">nColDividerStyle</span>       := LINESTYLE_BLACK<br />oBrw:<span style=\"color: #000000;\">nRowDividerStyle</span>       := LINESTYLE_BLACK<br />oBrw:<span style=\"color: #000000;\">lColDividerComplete</span>    := .t.<br /><br />WITH OBJECT oBrw<br />   :<span style=\"color: #000000;\">bClrStd</span>    := <span style=\"color: #000000;\">{</span> \|\| <span style=\"color: #00C800;\">If</span><span style=\"color: #000000;\">(</span> oBrw:<span style=\"color: #000000;\">KeyNo</span><span style=\"color: #000000;\">(</span><span style=\"color: #000000;\">)</span> % <span style=\"color: #000000;\">2</span> == <span style=\"color: #000000;\">0</span>, ;<br />                         <span style=\"color: #000000;\">{</span> CLR_BLACK, RGB<span style=\"color: #000000;\">(</span> <span style=\"color: #000000;\">224</span>, <span style=\"color: #000000;\">236</span>, <span style=\"color: #000000;\">255</span> <span style=\"color: #000000;\">)</span> <span style=\"color: #000000;\">}</span>, ;<br />                         <span style=\"color: #000000;\">{</span> CLR_BLACK, RGB<span style=\"color: #000000;\">(</span> <span style=\"color: #000000;\">189</span>, <span style=\"color: #000000;\">211</span>, <span style=\"color: #000000;\">253</span> <span style=\"color: #000000;\">)</span> <span style=\"color: #000000;\">}</span> <span style=\"color: #000000;\">)</span> <span style=\"color: #000000;\">}</span><br />   :<span style=\"color: #000000;\">bPopUp</span>     := <span style=\"color: #000000;\">{</span> \|\| brw_menu2<span style=\"color: #000000;\">(</span> oCol <span style=\"color: #000000;\">)</span> <span style=\"color: #000000;\">}</span><br />END<br /><br />oBrw:<span style=\"color: #000000;\">CreateFromCode</span><span style=\"color: #000000;\">(</span><span style=\"color: #000000;\">)</span><br />oWnd:<span style=\"color: #000000;\">oClient</span> := oBrw<br /><br /><span style=\"color: #0000ff;\">ACTIVATE</span> <span style=\"color: #0000ff;\">WINDOW</span> oWnd<br /><span style=\"color: #00C800;\">return</span><span style=\"color: #000000;\">(</span> <span style=\"color: #00C800;\">NIL</span> <span style=\"color: #000000;\">)</span><br /><br /><span style=\"color: #00C800;\">function</span> brw_menu2<span style=\"color: #000000;\">(</span> oCol <span style=\"color: #000000;\">)</span><br />   <span style=\"color: #00C800;\">local</span> oPopup<br />   <span style=\"color: #0000ff;\">MENU</span> oPopup <span style=\"color: #0000ff;\">POPUP</span> <span style=\"color: #000000;\">2007</span><br />      <span style=\"color: #0000ff;\">MENUITEM</span> <span style=\"color: #ff0000;\">\"Filter ...\"</span> <span style=\"color: #0000ff;\">ACTION</span> MsgInf<span style=\"color: #000000;\">(</span> <span style=\"color: #ff0000;\">\"Will be filter \"</span> <span style=\"color: #000000;\">)</span><br />      <span style=\"color: #0000ff;\">MENUITEM</span> <span style=\"color: #ff0000;\">\"Filter with input var ...\"</span> <span style=\"color: #0000ff;\">ACTION</span> MsgInf<span style=\"color: #000000;\">(</span> <span style=\"color: #ff0000;\">\"Advanced filter\"</span> <span style=\"color: #000000;\">)</span><br />      <span style=\"color: #0000ff;\">SEPARATOR</span><br />      <span style=\"color: #0000ff;\">MENUITEM</span> <span style=\"color: #ff0000;\">\"Clear filters\"</span> <span style=\"color: #0000ff;\">ACTION</span> MsgInf<span style=\"color: #000000;\">(</span> <span style=\"color: #ff0000;\">\"Clear filter\"</span> <span style=\"color: #000000;\">)</span><br />   <span style=\"color: #0000ff;\">ENDMENU</span><br /><span style=\"color: #00C800;\">return</span><span style=\"color: #000000;\">(</span> oPopup <span style=\"color: #000000;\">)</span><br /><br /> </div>[/code:2s5l31qa]\n\nAll source of prg as script is running OK without problem - query , xBrowse, mdi child . Until I press rigth mouse click on a browse ... <!-- s:( --><img src=\"{SMILIES_PATH}/icon_sad.gif\" alt=\":(\" title=\"Sad\" /><!-- s:( --> \n\n[code=fw:2s5l31qa]<div class=\"fw\" id=\"{CB}\" style=\"font-family: monospace;\"><br />   Error description: <span style=\"color: #000000;\">Error</span> BASE/<span style=\"color: #000000;\">1001</span>  Undefined <span style=\"color: #00C800;\">function</span>: <span style=\"color: #000000;\">BRW_MENU2</span><br />   Args:<br />     <span style=\"color: #000000;\">[</span>   <span style=\"color: #000000;\">1</span><span style=\"color: #000000;\">]</span> = U   <br /><br />Stack Calls<br />===========<br />   Called <span style=\"color: #0000ff;\">from</span>: <span style=\"color: #000000;\">pcode</span>.hrb => BRW_MENU2<span style=\"color: #000000;\">(</span> <span style=\"color: #000000;\">0</span> <span style=\"color: #000000;\">)</span><br />   Called <span style=\"color: #0000ff;\">from</span>: <span style=\"color: #000000;\">pcode</span>.hrb => <span style=\"color: #000000;\">(</span>b<span style=\"color: #000000;\">)</span>UZSAK<span style=\"color: #000000;\">(</span> <span style=\"color: #000000;\">120</span> <span style=\"color: #000000;\">)</span><br /> </div>[/code:2s5l31qa]\n\n It seems that script can use only one function inside ... Or not ? What can you advise in this situation ? \n\n With best regards !\n\n Old Fwh 11.11 , Harbour 3.1 MinGW", "time": "16:31", "topic": "Again about scripting ... HB_CompileBuf", "username": "Rimantas" } ]	Again about scripting ... HB_CompileBuf
[ { "date": "2013-03-08", "forum": "FiveWin for Harbour/xHarbour", "text": "Rimantas,\n\nRestore:\n[code=fw:2b3w1gbl]<div class=\"fw\" id=\"{CB}\" style=\"font-family: monospace;\"><span style=\"color: #B900B9;\">// external brw_menu2</span></div>[/code:2b3w1gbl]\n\n\nRegards", "time": "17:57", "topic": "Again about scripting ... HB_CompileBuf", "username": "Antonio Mart." } ]	Again about scripting ... HB_CompileBuf
[ { "date": "2013-03-08", "forum": "FiveWin for Harbour/xHarbour", "text": "[quote=\"Antonio Mart.\":1ld0ixre]Rimantas,\nRestore:\n[code=fw:1ld0ixre]<div class=\"fw\" id=\"{CB}\" style=\"font-family: monospace;\"><span style=\"color: #B900B9;\">// external brw_menu2</span></div>[/code:1ld0ixre]\n\nRegards[/quote:1ld0ixre]\n \n Hi Antonio ! \n\n Tried and that - the same result . I specially leave that visible .", "time": "18:14", "topic": "Again about scripting ... HB_CompileBuf", "username": "Rimantas" } ]	Again about scripting ... HB_CompileBuf