background
stringlengths 19
2.63k
|
|---|
In this article, we propose the fractional lower order covariance method
(FLOC) for estimating the parameters of vector autoregressive process (VAR) of
order $p$, $p\geq 1$ with symmetric stable noise. Further, we show the
efficiency, accuracy, and simplicity of our methods through Monte-Carlo
simulation.
|
Understanding the role of time-varying pollution mixtures on human health is
critical as people are simultaneously exposed to multiple pollutants during
their lives. For vulnerable sub-populations who have well-defined exposure
periods (e.g., pregnant women), questions regarding critical windows of
exposure to these mixtures are important for mitigating harm. We extend
Critical Window Variable Selection (CWVS) to the multipollutant setting by
introducing CWVS for Mixtures (CWVSmix), a hierarchical Bayesian method that
combines smoothed variable selection and temporally correlated weight
parameters to (i) identify critical windows of exposure to mixtures of
time-varying pollutants, (ii) estimate the time-varying relative importance of
each individual pollutant and their first order interactions within the
mixture, and (iii) quantify the impact of the mixtures on health. Through
simulation, we show that CWVSmix offers the best balance of performance in each
of these categories in comparison to competing methods. Using these approaches,
we investigate the impact of exposure to multiple ambient air pollutants on the
risk of stillbirth in New Jersey, 2005-2014. We find consistent elevated risk
in gestational weeks 2, 16-17, and 20 for non-Hispanic Black mothers, with
pollution mixtures dominated by ammonium (weeks 2, 17, 20), nitrate (weeks 2,
17), nitrogen oxides (weeks 2, 16), PM2.5 (week 2), and sulfate (week 20). The
method is available in the R package CWVSmix.
|
This paper describes an open data set of 3,053 energy meters from 1,636
non-residential buildings with a range of two full years (2016 and 2017) at an
hourly frequency (17,544 measurements per meter resulting in approximately 53.6
million measurements). These meters were collected from 19 sites across North
America and Europe, with one or more meters per building measuring whole
building electrical, heating and cooling water, steam, and solar energy as well
as water and irrigation meters. Part of these data were used in the Great
Energy Predictor III (GEPIII) competition hosted by the ASHRAE organization in
October-December 2019. GEPIII was a machine learning competition for long-term
prediction with an application to measurement and verification. This paper
describes the process of data collection, cleaning, and convergence of
time-series meter data, the meta-data about the buildings, and complementary
weather data. This data set can be used for further prediction benchmarking and
prototyping as well as anomaly detection, energy analysis, and building type
classification.
|
The stochastic blockmodel (SBM) models the connectivity within and between
disjoint subsets of nodes in networks. Prior work demonstrated that the rows of
an SBM's adjacency spectral embedding (ASE) and Laplacian spectral embedding
(LSE) both converge in law to Gaussian mixtures where the components are curved
exponential families. Maximum likelihood estimation via the
Expectation-Maximization (EM) algorithm for a full Gaussian mixture model (GMM)
can then perform the task of clustering graph nodes, albeit without appealing
to the components' curvature. Noting that EM is a special case of the
Expectation-Solution (ES) algorithm, we propose two ES algorithms that allow us
to take full advantage of these curved structures. After presenting the ES
algorithm for the general curved-Gaussian mixture, we develop those
corresponding to the ASE and LSE limiting distributions. Simulating from
artificial SBMs and a brain connectome SBM reveals that clustering graph nodes
via our ES algorithms improves upon that of EM for a full GMM.
|
In this paper we propose and examine gap statistics for assessing uniform
distribution hypotheses. We provide examples relevant to data integrity testing
for which max-gap statistics provide greater sensitivity than chi-square
($\chi^2$), thus allowing the new test to be used in place of or as a
complement to $\chi^2$ testing for purposes of distinguishing a larger class of
deviations from uniformity. We establish that the proposed max-gap test has the
same sequential and parallel computational complexity as $\chi^2$ and thus is
applicable for Big Data analytics and integrity verification.
|
Alzheimer's disease (AD) is a chronic neurodegenerative disease that causes
memory loss and decline in cognitive abilities. AD is the sixth leading cause
of death in the United States, affecting an estimated 5 million Americans. To
assess the association between multiple genetic variants and multiple
measurements of structural changes in the brain a recent study of AD used a
multivariate measure of linear dependence, the RV coefficient. The authors
decomposed the RV coefficient into contributions from individual variants and
displayed these contributions graphically. We investigate the properties of
such a `contribution plot' in terms of an underlying linear model, and discuss
estimation of the components of the plot when the correlation signal may be
sparse. The contribution plot is applied to simulated data and to genomic and
brain imaging data from the Alzheimer's Disease Neuroimaging Initiative.
|
Acceptance sampling plans offered by ISO 2859-1 are far from optimal under
the conditions for statistical verification in modules F and F1 as prescribed
by Annex II of the Measuring Instruments Directive (MID) 2014/32/EU, resulting
in sample sizes that are larger than necessary. An optimised single-sampling
scheme is derived, both for large lots using the binomial distribution and for
finite-sized lots using the exact hypergeometric distribution, resulting in
smaller sample sizes that are economically more efficient while offering the
full statistical protection required by the MID.
|
Sulfuric acid aerosol is suspected to be a major contributor to mortality and
morbidity associated with air pollution. The objective of the study is to
determine if exposure of human participants to anticipated levels of sulfuric
acid aerosol ($\sim 100\mu g/m^3 $) in the near future would have an adverse
effect on respiratory function. We used data from 28 adults exposed to sulfuric
acid for 4 hours in a controlled exposure chamber over a 3 day period with
repeated measures of pulmonary function (FEV1) recorded at 2-hour intervals.
Measurements were also recorded after 2 and 24 hours post exposure. We
formulated a linear mixed effect model for FEV1 with fixed effects (day of
treatment, hour, day-hour interaction, and smoking status), a random intercept
and an AR1 covariance structure to estimate the effect of aerosol exposure on
FEV1. We further assessed whether smoking status modified the exposure effects
and compared the analysis to the method used by Kerr et al.,1981. The findings
of the study show that the effect of day 3 exposure is negatively associated
with lung function (coefficient ($\beta$), -0.08; 95% CI, -0.16 to -0.01). A
weak negative association is also observed with increasing hours of exposure
($\beta$, -0.01; 95% CI, -0.03 to 0.00). Among the smokers, we found a
significant negative association with hours of exposure ($\beta$, -0.02; 95%
CI, -0.03 to -0.00), day 3 exposure ($\beta$, -0.11; 95% CI, -0.14 to -0.02)
and a borderline adverse effect for day 2 treatment ($\beta$, -0.06; 95% CI,
-0.14 to 0.03) whilst no significant association was observed for nonsmokers.
In conclusion, anticipated deposits of sulfuric acid aerosol in the near would
adversely affect respiratory function. The effect observed in smokers is
significantly more adverse than in nonsmokers.
|
Linear problems appear in a variety of disciplines and their application for
the transmission matrix recovery is one of the most stimulating challenges in
biomedical imaging. Its knowledge turns any random media into an optical tool
that can focus or transmit an image through disorder. Here, converting an
input-output problem into a statistical mechanical formulation, we investigate
how inference protocols can learn the transmission couplings by
pseudolikelihood maximization. Bridging linear regression and thermodynamics
let us propose an innovative framework to pursue the solution of the
scattering-riddle.
|
Inferring microbial community structure based on temporal metagenomics data
is an important goal in microbiome studies. The deterministic generalized
Lotka-Volterra differential (GLV) equations have been used to model the
dynamics of microbial data. However, these approaches fail to take random
environmental fluctuations into account, which may negatively impact the
estimates. We propose a new stochastic GLV (SGLV) differential equation model,
where the random perturbations of Brownian motion in the model can naturally
account for the external environmental effects on the microbial community. We
establish new conditions and show various mathematical properties of the
solutions including general existence and uniqueness, stationary distribution,
and ergodicity. We further develop approximate maximum likelihood estimators
based on discrete observations and systematically investigate the consistency
and asymptotic normality of the proposed estimators. Our method is demonstrated
through simulation studies and an application to the well-known "moving
picture" temporal microbial dataset.
|
In this paper, we present a data-driven model for forecasting the production
increase after hydraulic fracturing (HF). We use data from fracturing jobs
performed at one of the Siberian oilfields. The data includes features,
characterizing the jobs, and geological information. To predict an oil rate
after the fracturing machine learning (ML) technique was applied. We compared
the ML-based prediction to a prediction based on the experience of reservoir
and production engineers responsible for the HF-job planning. We discuss the
potential for further development of ML techniques for predicting changes in
oil rate after HF.
|
In risk-sensitive learning, one aims to find a hypothesis that minimizes a
risk-averse (or risk-seeking) measure of loss, instead of the standard expected
loss. In this paper, we propose to study the generalization properties of
risk-sensitive learning schemes whose optimand is described via optimized
certainty equivalents (OCE): our general scheme can handle various known risks,
e.g., the entropic risk, mean-variance, and conditional value-at-risk, as
special cases. We provide two learning bounds on the performance of empirical
OCE minimizer. The first result gives an OCE guarantee based on the Rademacher
average of the hypothesis space, which generalizes and improves existing
results on the expected loss and the conditional value-at-risk. The second
result, based on a novel variance-based characterization of OCE, gives an
expected loss guarantee with a suppressed dependence on the smoothness of the
selected OCE. Finally, we demonstrate the practical implications of the
proposed bounds via exploratory experiments on neural networks.
|
We introduce new generative models for time series based on Euler
discretization that do not require any pre-stationarization procedure.
Specifically, we develop two GAN based methods, relying on the adaptation of
Wasserstein GANs (Arjovsky et al., 2017) and DVD GANs (Clark et al., 2019b) to
time series. Alternatively, we consider a conditional Euler Generator (CEGEN)
minimizing a distance between the induced conditional densities. In the context
of It\^o processes, we theoretically validate this approach and demonstrate
using the Bures metric that reaching a low loss level provides accurate
estimations for both the drift and the volatility terms of the underlying
process. Tests on simple models show how the Euler discretization and the use
of Wasserstein distance allow the proposed GANs and (more considerably) CEGEN
to outperform state-of-the-art Time Series GAN generation( Yoon et al., 2019b)
on time structure metrics. In higher dimensions we observe that CEGEN manages
to get the correct covariance structures. Finally we illustrate how our model
can be combined to a Monte Carlo simulator in a low data context by using a
transfer learning technique
|
We introduce a class of hybrid M-estimators of multivariate scatter which,
analogous to the popular spatial sign covariance matrix (SSCM), possess high
breakdown points. We also show that the SSCM can be viewed as an extreme member
of this class. Unlike the SSCM, but like the regular M-estimators of scatter,
this new class of estimators takes into account the shape of the contours of
the data cloud for downweighting observations.
|
The measurement data collected from the supervisory control and data
acquisition (SCADA) system installed in distribution network can reflect the
operational state of the network effectively. In this paper, a random matrix
theory (RMT) based approach is developed for early anomaly detection and
localization by using the data. For every feeder in the distribution network, a
corresponding data matrix is formed. Based on the Marchenko-Pastur Law for the
empirical spectral analysis of covariance `signal+noise' matrix, the linear
eigenvalue statistics are introduced to indicate the anomaly, and the outliers
and their corresponding eigenvectors are analyzed for locating the anomaly. As
for the low observability feeders in the distribution network, an increasing
data dimension algorithm is designed for the formulated low-dimensional
matrices being more accurately analyzed. The developed approach can detect and
localize the anomaly at an early stage, and it is robust to random disturbance
and measurement error. Cases on Matpower simulation data and real SCADA data
corroborate the feasibility of the approach.
|
The Hierarchical Dirichlet Process Hidden Markov Model (HDP-HMM) has been
used widely as a natural Bayesian nonparametric extension of the classical
Hidden Markov Model for learning from sequential and time-series data. A sticky
extension of the HDP-HMM has been proposed to strengthen the self-persistence
probability in the HDP-HMM. However, the sticky HDP-HMM entangles the strength
of the self-persistence prior and transition prior together, limiting its
expressiveness. Here, we propose a more general model: the disentangled sticky
HDP-HMM (DS-HDP-HMM). We develop novel Gibbs sampling algorithms for efficient
inference in this model. We show that the disentangled sticky HDP-HMM
outperforms the sticky HDP-HMM and HDP-HMM on both synthetic and real data, and
apply the new approach to analyze neural data and segment behavioral video
data.
|
During the last two decades, locally stationary processes have been widely
studied in the time series literature. In this paper we consider the
locally-stationary vector-auto-regression model of order one, or LS-VAR(1), and
estimate its parameters by weighted least squares. The LS-VAR(1) we consider
allows for a smoothly time-varying non-diagonal VAR matrix, as well as for a
smoothly time-varying non-zero mean. The weighting scheme is based on kernel
smoothers. The time-varying mean and the time-varying VAR matrix are estimated
jointly, and the definition of the local-linear weighting matrix is provided in
closed-from. The quality of the estimated curves is illustrated through
simulation results.
|
In this paper we consider the problem of clustering collections of very short
texts using subspace clustering. This problem arises in many applications such
as product categorisation, fraud detection, and sentiment analysis. The main
challenge lies in the fact that the vectorial representation of short texts is
both high-dimensional, due to the large number of unique terms in the corpus,
and extremely sparse, as each text contains a very small number of words with
no repetition. We propose a new, simple subspace clustering algorithm that
relies on linear algebra to cluster such datasets. Experimental results on
identifying product categories from product names obtained from the US Amazon
website indicate that the algorithm can be competitive against state-of-the-art
clustering algorithms.
|
A potential voter must incur a number of costs in order to successfully cast
an in-person ballot, including the costs associated with identifying and
traveling to a polling place. In order to investigate how these costs affect
voting behavior, we introduce two quasi-experimental designs that can be used
to study how the political participation of registered voters is affected by
differences in the relative distance that registrants must travel to their
assigned Election Day polling place and whether their polling place remains at
the same location as in a previous election. Our designs make comparisons of
registrants who live on the same residential block, but are assigned to vote at
different polling places. We find that living farther from a polling place and
being assigned to a new polling place reduce in-person Election Day voting, but
that registrants largely offset for this by casting more early in-person and
mail ballots.
|
The X-chromosome is often excluded from genome-wide association studies
because of analytical challenges. Some have been investigated such as the
random, skewed or no X-inactivation model uncertainty. Others have received
little to no attention such as the value in considering non-additive and
gene-sex interaction effects, and the inferential consequence of choosing
different baseline alleles. Here we propose a unified and flexible
regression-based association test for the X-chromosome. We provide theoretical
justifications for its robustness in the presence of various model
uncertainties, as well as for its improved power under certain alternatives
when compared with the existing approaches. For completeness, we also revisit
the autosomes and show that the proposed framework leads to a robust and
sometimes much more powerful test than the standard method. Finally, we provide
supporting evidence by revisiting several published genome-wide association
studies. Supplementary materials for this article are available online.
|
Lumber and wood-based products are versatile construction materials that are
susceptible to weakening as a result of applied stresses. To assess the effects
of load duration and rate, experiments have been carried out by applying preset
load profiles to sample specimens. This paper studies these effects via a
damage modeling approach, by considering three models in the literature: the
Gerhards and Foschi accumulated damage models, and a degradation model based on
the gamma process. We present a statistical framework for fitting these models
to failure time data generated by a combination of ramp and constant load
settings, and show how estimation uncertainty can be quantified. The models and
methods are illustrated and compared via a novel analysis of a Hemlock lumber
dataset. Practical usage of the fitted damage models is demonstrated with an
application to long-term reliability prediction under stochastic future
loadings.
|
Count data and recurrent events in clinical trials, such as the number of
lesions in magnetic resonance imaging in multiple sclerosis, the number of
relapses in multiple sclerosis, the number of hospitalizations in heart
failure, and the number of exacerbations in asthma or in chronic obstructive
pulmonary disease (COPD) are often modeled by negative binomial distributions.
In this manuscript we study planning and analyzing clinical trials with group
sequential designs for negative binomial outcomes. We propose a group
sequential testing procedure for negative binomial outcomes based on Wald
statistics using maximum likelihood estimators. The asymptotic distribution of
the proposed group sequential tests statistics are derived. The finite sample
size properties of the proposed group sequential test for negative binomial
outcomes and the methods for planning the respective clinical trials are
assessed in a simulation study. The simulation scenarios are motivated by
clinical trials in chronic heart failure and relapsing multiple sclerosis,
which cover a wide range of practically relevant settings. Our research assures
that the asymptotic normal theory of group sequential designs can be applied to
negative binomial outcomes when the hypotheses are tested using Wald statistics
and maximum likelihood estimators. We also propose two methods, one based on
Student's t-distribution and one based on resampling, to improve type I error
rate control in small samples. The statistical methods studied in this
manuscript are implemented in the R package \textit{gscounts}, which is
available for download on the Comprehensive R Archive Network (CRAN).
|
We propose a model for the description and the forecast of the gross prices
of electricity in the liberalized Italian energy market via an additive
two-factor model driven by both a Hawkes and a fractional Brownian processes.
We discuss the seasonality, the identification of spikes and the estimates of
the Hurst coefficient. After the calibration and the validation of the model,
we discuss its forecasting performance via a class of adequate evaluation
metrics.
|
The flexibility and wide applicability of the Fisher randomization test (FRT)
makes it an attractive tool for assessment of causal effects of interventions
from modern-day randomized experiments that are increasing in size and
complexity. This paper provides a theoretical inferential framework for FRT by
establishing its connection with confidence distributions Such a connection
leads to development of (i) an unambiguous procedure for inversion of FRTs to
generate confidence intervals with guaranteed coverage, (ii) generic and
specific methods to combine FRTs from multiple independent experiments with
theoretical guarantees and (iii) new insights on the effect of size of the
Monte Carlo sample on the results of FRT. Our developments pertain to finite
sample settings but have direct extensions to large samples. Simulations and a
case example demonstrate the benefit of these new developments.
|
Wind energy resource quantification, air pollution monitoring, and weather
forecasting all rely on rapid, accurate measurement of local wind conditions.
Visual observations of the effects of wind---the swaying of trees and flapping
of flags, for example---encode information regarding local wind conditions that
can potentially be leveraged for visual anemometry that is inexpensive and
ubiquitous. Here, we demonstrate a coupled convolutional neural network and
recurrent neural network architecture that extracts the wind speed encoded in
visually recorded flow-structure interactions of a flag and tree in naturally
occurring wind. Predictions for wind speeds ranging from 0.75-11 m/s showed
agreement with measurements from a cup anemometer on site, with a
root-mean-squared error approaching the natural wind speed variability due to
atmospheric turbulence. Generalizability of the network was demonstrated by
successful prediction of wind speed based on recordings of other flags in the
field and in a controlled wind tunnel test. Furthermore, physics-based scaling
of the flapping dynamics accurately predicts the dependence of the network
performance on the video frame rate and duration.
|
Data collected by wearable devices in sports provide valuable information
about an athlete's behavior such as their activity, performance, and ability.
These time series data can be studied with approaches such as hidden Markov and
semi-Markov models (HMM and HSMM) for varied purposes including activity
recognition and event detection. HSMMs extend the HMM by explicitly modeling
the time spent in each state. In a discrete-time HSMM, the duration in each
state can be modeled with a zero-truncated Poisson distribution, where the
duration parameter may be state-specific but constant in time. We extend the
HSMM by allowing the state-specific duration parameters to vary in time and
model them as a function of known covariates derived from the wearable device
and observed over a period of time leading up to a state transition. In
addition, we propose a data subsampling approach given that high-frequency data
from wearable devices can violate the conditional independence assumption of
the HSMM. We apply the model to wearable device data collected on a soccer
referee in a Major League Soccer game. We model the referee's physiological
response to the game demands and identify important time-varying effects of
these demands associated with the duration in each state.
|
The debate surrounding the hot hand in the NBA has been ongoing for many
years. However, many of the previous works on this theme has focused on only
the very next sequential shot attempt, often on very select players. This work
looks in more detail the effect of a made or missed shot on the next series of
shots over a two-year span, with time between shots shown to be a critical
factor in the analysis. Also, multi-year streakiness is analyzed, and all
indications are that players cannot really sustain their good (or bad) fortune
from year to year.
|
The paper uses diffusion models to understand the main determinants of
diffusion of solar photovoltaic panels (SPP) worldwide, focusing on the role of
public incentives. We applied the generalized Bass model (GBM) to adoption data
of 26 countries between 1992-2016. The SPP market appears as a frail and
complicate one, lacking public media support. Even the major shocks in adoption
curves, following state incentive implemented after 2006, failed to go beyond
short-term effects and therefore were unable to provide sustained momentum to
the market. This suggests that further barriers to adoption should be removed.
|
Background: The standardized mortality ratio (SMR) is often used to assess
and compare hospital performance. While it has been recognized that hospitals
may differ in their SMRs due to differences in patient composition, there is a
lack of rigorous analysis of this and other - largely unrecognized - properties
of the SMR. Methods: This paper proposes five axiomatic requirements for
adequate standardized mortality measures: strict monotonicity, case-mix
insensitivity, scale insensitivity, equivalence principle, and dominance
principle. Given these axiomatic requirements, effects of variations in patient
composition, hospital size, and actual and expected mortality rates on the SMR
were examined using basic algebra and calculus. In this regard, we
distinguished between standardization using expected mortality rates derived
from a different dataset (external standardization) and standardization based
on a dataset including the considered hospitals (internal standardization).
Results: Under external standardization, the SMR fulfills the axiomatic
requirements of strict monotonicity and scale insensitivity but violates the
requirement of case-mix insensitivity, the equivalence principle, and the
dominance principle. All axiomatic requirements not fulfilled under external
standardization are also not fulfilled under internal standardization. In
addition, the SMR under internal standardization is scale sensitive and
violates the axiomatic requirement of strict monotonicity. Conclusions: The SMR
fulfills only two (none) out of the five proposed axiomatic requirements under
external (internal) standardization. Generally, the SMRs of hospitals are
differently affected by variations in case mix and actual and expected
mortality rates unless the hospitals are identical in these characteristics.
These properties hamper valid assessment and comparison of hospital performance
based on the SMR.
|
Super-resolution microscopy is rapidly gaining importance as an analytical
tool in the life sciences. A compelling feature is the ability to label
biological units of interest with fluorescent markers in living cells and to
observe them with considerably higher resolution than conventional microscopy
permits. The images obtained this way, however, lack an absolute intensity
scale in terms of numbers of fluorophores observed. We provide an elaborate
model to estimate this information from the raw data. To this end we model the
entire process of photon generation in the fluorophore, their passage trough
the microscope, detection and photo electron amplification in the camera, and
extraction of time series from the microscopic images. At the heart of these
modeling steps is a careful description of the fluorophore dynamics by a novel
hidden Markov model that operates on two time scales (HTMM). Besides the
fluorophore number, information about the kinetic transition rates of the
fluorophore's internal states is also inferred during estimation. We comment on
computational issues that arise when applying our model to simulated or
measured fluorescence traces and illustrate our methodology on simulated data.
|
Uncertainty estimation and ensembling methods go hand-in-hand. Uncertainty
estimation is one of the main benchmarks for assessment of ensembling
performance. At the same time, deep learning ensembles have provided
state-of-the-art results in uncertainty estimation. In this work, we focus on
in-domain uncertainty for image classification. We explore the standards for
its quantification and point out pitfalls of existing metrics. Avoiding these
pitfalls, we perform a broad study of different ensembling techniques. To
provide more insight in this study, we introduce the deep ensemble equivalent
score (DEE) and show that many sophisticated ensembling techniques are
equivalent to an ensemble of only few independently trained networks in terms
of test performance.
|
Stochastic weather generators (SWGs) are digital twins of complex weather
processes and widely used in agriculture and urban design. Due to improved
measuring instruments, an accurate SWG for high-frequency precipitation is now
possible. However, high-frequency precipitation data are more zero-inflated,
skewed, and heavy-tailed than common (hourly or daily) precipitation data.
Therefore, classical methods that either model precipitation occurrence
independently of their intensity or assume that the precipitation follows a
censored meta-Gaussian process may not be appropriate. In this work, we propose
a novel multi-site precipitation generator that drives both occurrence and
intensity by a censored non-Gaussian vector autoregression model with
skew-symmetric dynamics. The proposed SWG is advantageous in modeling skewed
and heavy-tailed data with direct physical and statistical interpretations. We
apply the proposed model to 30-second precipitation based on the data obtained
from a dense gauge network in Lausanne, Switzerland. In addition to reproducing
the high-frequency precipitation, the model can provide accurate predictions as
the long short-term memory (LSTM) network but with uncertainties and more
interpretable results.
|
The production of lithium-ion battery cells is characterized by a high degree
of complexity due to numerous cause-effect relationships between process
characteristics. Knowledge about the multi-stage production is spread among
several experts, rendering tasks as failure analysis challenging. In this
paper, a new method is presented that includes expert knowledge acquisition in
production ramp-up by combining Failure Mode and Effects Analysis (FMEA) with a
Bayesian Network. Special algorithms are presented that help detect and resolve
inconsistencies between the expert-provided parameters which are bound to occur
when collecting knowledge from several process experts. We show the
effectiveness of this holistic method by building up a large scale,
cross-process Bayesian Failure Network in lithium-ion battery production and
its application for root cause analysis.
|
We aim at developing and improving the imbalanced business risk modeling via
jointly using proper evaluation criteria, resampling, cross-validation,
classifier regularization, and ensembling techniques. Area Under the Receiver
Operating Characteristic Curve (AUC of ROC) is used for model comparison based
on 10-fold cross validation. Two undersampling strategies including random
undersampling (RUS) and cluster centroid undersampling (CCUS), as well as two
oversampling methods including random oversampling (ROS) and Synthetic Minority
Oversampling Technique (SMOTE), are applied. Three highly interpretable
classifiers, including logistic regression without regularization (LR),
L1-regularized LR (L1LR), and decision tree (DT) are implemented. Two
ensembling techniques, including Bagging and Boosting, are applied on the DT
classifier for further model improvement. The results show that, Boosting on DT
by using the oversampled data containing 50% positives via SMOTE is the optimal
model and it can achieve AUC, recall, and F1 score valued 0.8633, 0.9260, and
0.8907, respectively.
|
Accurate estimates of historical changes in sea surface temperatures (SSTs)
and their uncertainties are important for documenting and understanding
historical changes in climate. A source of uncertainty that has not previously
been quantified in historical SST estimates stems from position errors. A
Bayesian inference framework is proposed for quantifying errors in reported
positions and their implications on SST estimates. The analysis framework is
applied to data from the International Comprehensive Ocean-Atmosphere Data Set
(ICOADS3.0) in 1885, a time when astronomical and chronometer estimation of
position was common, but predating the use of radio signals. Focus is upon a
subset of 943 ship tracks from ICOADS3.0 that report their position every two
hours to a precision of 0.01{\deg} longitude and latitude. These data are
interpreted as positions determined by dead reckoning that are periodically
updated by celestial correction techniques. The posterior medians of
uncertainties in celestial correction are 33.1 km (0.30{\deg} on the equator)
in longitude and 24.4 km (0.22{\deg}) in latitude, respectively. The posterior
medians of two-hourly dead reckoning uncertainties are 19.2% for ship speed and
13.2{\deg} for ship heading, leading to random position uncertainties with
median 0.18{\deg} (20 km on the equator) in longitude and 0.15{\deg} (17 km) in
latitude. Reported ship tracks also contain systematic position uncertainties
relating to precursor dead-reckoning positions not being updated after
obtaining celestial position estimates, indicating that more accurate positions
can be provided for SST observations. Finally, we translate position errors
into SST uncertainties by sampling an ensemble of SSTs from the Multi-scale
Ultra-high resolution Sea Surface Temperature (MURSST) data set.
|
Recent discoveries suggest that our gut microbiome plays an important role in
our health and wellbeing. However, the gut microbiome data are intricate; for
example, the microbial diversity in the gut makes the data high-dimensional.
While there are dedicated high-dimensional methods, such as the lasso
estimator, they always come with the risk of false discoveries. Knockoffs are a
recent approach to control the number of false discoveries. In this paper, we
show that knockoffs can be aggregated to increase power while retaining sharp
control over the false discoveries. We support our method both in theory and
simulations, and we show that it can lead to new discoveries on microbiome data
from the American Gut Project. In particular, our results indicate that several
phyla that have been overlooked so far are associated with obesity.
|
Accurate and reliable data stream plays an important role in air quality
assessment. Air pollution data collected from monitoring networks, however,
could be biased due to instrumental error or other interventions, which covers
up the real pollution status and misleads policy making. In this study,
motivated by the needs for objective bias detection, we propose a hidden
dynamic geostatistical calibration (HDGC) model to automatically identify
monitoring stations with constantly biased readings. The HDGC model is a
two-level hierarchical model whose parameters are estimated through an
efficient Expectation-Maximization algorithm. Effectiveness of the proposed
model is demonstrated by a simple numerical study. Our method is applied to
hourly $PM_{2.5}$ data from 36 stations in Hebei province, China, over the
period from March 2014 to February 2017. Significantly abnormal readings are
detected from stations in two cities.
|
Failure times of a machinery cannot always be assumed independent and
identically distributed, e.g. if after reparations the machinery is not
restored to a same-as-new condition. Framed within the renewal processes
approach, a generalization that considers exchangeable inter-arrival times is
presented. The resulting model provides a more realistic approach to capture
the dependence among events occurring at random times, while retaining much of
the tractability of the classical renewal process. Extensions of some classical
results and special cases of renewal functions are analyzed, in particular the
one corresponding to an exchangeable sequence driven by a Dirichlet process.
The proposal is tested through an estimation procedure using simulated data
sets and with an application to the reliability of hydraulic subsystems in
load-haul-dump machines.
|
Stephen Fienberg's affinity for contingency table problems and reinterpreting
models with a fresh look gave rise to a new approach for hypothesis testing of
network models that are linear exponential families. We outline his vision and
influence in this fundamental problem, as well as generalizations to
multigraphs and hypergraphs.
|
In this report we examine the effectiveness of WISER in identification of a
chemical culprit during a chemical based Mass Casualty Incident (MCI). We also
evaluate and compare Binary Decision Tree (BDT) and Artificial Neural Networks
(ANN) using the same experimental conditions as WISER. The reverse engineered
set of Signs/Symptoms from the WISER application was used as the training set
and 31,100 simulated patient records were used as the testing set. Three sets
of simulated patient records were generated by 5%, 10% and 15% perturbation of
the Signs/Symptoms of each chemical record. While all three methods achieved a
100% training accuracy, WISER, BDT and ANN produced performances in the range
of: 1.8%-0%, 65%-26%, 67%-21% respectively. A preliminary investigation of
dimensional reduction using ANN illustrated a dimensional collapse from 79
variables to 40 with little loss of classification performance.
|
Meta-analysis is an important tool for combining results from multiple
studies and has been widely used in evidence-based medicine for several
decades. This paper reports, for the first time, an interesting and valuable
paradox in random-effects meta-analysis that is likely to occur when the number
of studies is small and/or the heterogeneity is large. With the incredible
paradox, we hence advocate meta-analysts to be extremely cautious when
interpreting the final results from the random-effects meta-analysis. And more
importantly, with the unexpected dilemma in making decisions, the new paradox
has raised an open question whether the current random-effects model is
reasonable and tenable for meta-analysis, or it needs to be abandoned or
further improved to some extent.
|
We consider models underlying regression analysis of count data in which the
observed frequency of zero counts is unusually large, typically with respect to
the Poisson distribution. We focus on two alternative modelling approaches:
Over-Dispersion (OD) models, and Zero-Inflation (ZI) models, both of which can
be seen as generalisations of the Poisson distribution; we refer to these as
Implicit and Explicit ZI models, respectively. Although sometimes seen as
competing approaches, they can be complementary; OD is a consequence of ZI
modelling, and ZI is a by-product of OD modelling. The central objective in
such analyses is often concerned with inference on the effect of covariates on
the mean, in light of the excess of zeros in the counts. The contribution of
our paper is to focus on models for different types of ZI, some of which can
only be generated by explicit ZI modelling; and on their characterisation by
considering the induced probability of a zero as a function of the zero
probability of a base distribution (usually Poisson). We develop the underlying
theory for univariate counts. The perspective highlights some of the
difficulties encountered in distinguishing the alternative modelling options.
|
For data sets with similar features, for example highly correlated features,
most existing stability measures behave in an undesired way: They consider
features that are almost identical but have different identifiers as different
features. Existing adjusted stability measures, that is, stability measures
that take into account the similarities between features, have major
theoretical drawbacks. We introduce new adjusted stability measures that
overcome these drawbacks. We compare them to each other and to existing
stability measures based on both artificial and real sets of selected features.
Based on the results, we suggest using one new stability measure that considers
highly similar features as exchangeable.
|
Classification tasks in machine learning involving more than two classes are
known by the name of "multi-class classification". Performance indicators are
very useful when the aim is to evaluate and compare different classification
models or machine learning techniques. Many metrics come in handy to test the
ability of a multi-class classifier. Those metrics turn out to be useful at
different stage of the development process, e.g. comparing the performance of
two different models or analysing the behaviour of the same model by tuning
different parameters. In this white paper we review a list of the most
promising multi-class metrics, we highlight their advantages and disadvantages
and show their possible usages during the development of a classification
model.
|
This paper reports a comprehensive study of distributional uncertainty in a
few socio-economic indicators across the various states of India over the years
2001-2011. We show that the DGB distribution, a typical rank order
distribution, provide excellent fits to the district-wise empirical data for
the population size, literacy rate (LR) and work participation rate (WPR)
within every states in India, through its two distributional parameters.
Moreover, taking resort to the entropy formulation of the DGB distribution, a
proposed uncertainty percentage (UP) unveils the dynamics of the uncertainty of
LR and WPR in all states of India. We have also commented on the changes in the
estimated parameters and the UP values from the years 2001 to 2011.
Additionally, a gender based analysis of the distribution of these important
socio-economic variables within different states of India has also been
discussed. Interestingly, it has been observed that, although the distributions
of the numbers of literate and working people has a direct (linear)
correspondence with that of the population size, the literacy and
work-participation rates are distributed independently of the population
distributions.
|
There exist various types of network block models such as the Stochastic
Block Model (SBM), the Degree Corrected Block Model (DCBM), and the Popularity
Adjusted Block Model (PABM). While this leads to a variety of choices, the
block models do not have a nested structure. In addition, there is a
substantial jump in the number of parameters from the DCBM to the PABM. The
objective of this paper is formulation of a hierarchy of block model which does
not rely on arbitrary identifiability conditions. We propose a Nested Block
Model (NBM) that treats the SBM, the DCBM and the PABM as its particular cases
with specific parameter values, and, in addition, allows a multitude of
versions that are more complicated than DCBM but have fewer unknown parameters
than the PABM. The latter allows one to carry out clustering and estimation
without preliminary testing, to see which block model is really true.
|
Fiber bundle models (FBM's) have been used to model the failure of fibrous
composites as load-sharing systems since the 1960's when Rosen (1964 and 1965)
conducted some remarkable experiments on unidirectional fibrous composites.
These experiments gave seminal insights into their failure under increasing
tensile load. However, over the last thirty years FBM's have been used to model
catastrophic failure in other situations by the physical science community and
others. The purpose of this paper is to sketch some research on load-sharing
models and statistical analysis methods that have been overlooked by this
community. These are illustrated by summarizing the findings regarding Rosen's
Specimen A experiments and presenting the necessary results needed for this.
Related research about the bundle breaking strength distribution and the joint
distribution (the Gibbs measure) regarding the state (failed or unfailed) of
the bundle components at a given load per component, $s$, is also given.
|
We propose a statistical model to understand people's perception of their
carbon footprint. Driven by the observation that few people think of CO2 impact
in absolute terms, we design a system to probe people's perception from simple
pairwise comparisons of the relative carbon footprint of their actions. The
formulation of the model enables us to take an active-learning approach to
selecting the pairs of actions that are maximally informative about the model
parameters. We define a set of 18 actions and collect a dataset of 2183
comparisons from 176 users on a university campus. The early results reveal
promising directions to improve climate communication and enhance climate
mitigation.
|
The estimation of travel time distribution (TTD) is critical for reliable
route guidance and provides theoretical bases and technical support for
advanced traffic management and control. The state-of-the art procedure for
estimating arterial TTD commonly assumes that the path travel time follows a
certain distribution without considering segment correlation. However, this
approach is usually unrealistic as travel times on successive segments may be
dependent. In this study, copula functions are used to model arterial TTD as
copulas are able to incorporate for segment correlation. First, segment
correlation is empirically investigated using day-to-day GPS data provided by
BMW Group for one major urban arterial in Munich, Germany. Segment TTDs are
estimated using a finite Gaussian Mixture Model (GMM). Next, several copula
models are introduced, namely Gaussian, Student-t, Clayton, and Gumbel, to
model the dependent structure between segment TTDs. The parameters of each
copula model are obtained by Maximum Log Likelihood Estimation. Then, path TTDs
comprised of consecutive segment TTDs are estimated based on the copula models.
The scalability of the model is evaluated by investigating the performance for
an increasing number of aggregated links. The best fitting copula is determined
in terms of goodness-of-fit test. The results demonstrate the advantage of the
proposed copula model for an increasing number of aggregated segments, compared
to the convolution without incorporating segment correlations.
|
In the online false discovery rate (FDR) problem, one observes a possibly
infinite sequence of $p$-values $P_1,P_2,\dots$, each testing a different null
hypothesis, and an algorithm must pick a sequence of rejection thresholds
$\alpha_1,\alpha_2,\dots$ in an online fashion, effectively rejecting the
$k$-th null hypothesis whenever $P_k \leq \alpha_k$. Importantly, $\alpha_k$
must be a function of the past, and cannot depend on $P_k$ or any of the later
unseen $p$-values, and must be chosen to guarantee that for any time $t$, the
FDR up to time $t$ is less than some pre-determined quantity $\alpha \in
(0,1)$. In this work, we present a powerful new framework for online FDR
control that we refer to as SAFFRON. Like older alpha-investing (AI)
algorithms, SAFFRON starts off with an error budget, called alpha-wealth, that
it intelligently allocates to different tests over time, earning back some
wealth on making a new discovery. However, unlike older methods, SAFFRON's
threshold sequence is based on a novel estimate of the alpha fraction that it
allocates to true null hypotheses. In the offline setting, algorithms that
employ an estimate of the proportion of true nulls are called adaptive methods,
and SAFFRON can be seen as an online analogue of the famous offline Storey-BH
adaptive procedure. Just as Storey-BH is typically more powerful than the
Benjamini-Hochberg (BH) procedure under independence, we demonstrate that
SAFFRON is also more powerful than its non-adaptive counterparts, such as LORD
and other generalized alpha-investing algorithms. Further, a monotone version
of the original AI algorithm is recovered as a special case of SAFFRON, that is
often more stable and powerful than the original. Lastly, the derivation of
SAFFRON provides a novel template for deriving new online FDR rules.
|
The Bluetooth sensor embedded in mobile phones provides an unobtrusive,
continuous, and cost-efficient means to capture individuals' proximity
information, such as the nearby Bluetooth devices count (NBDC). The continuous
NBDC data can partially reflect individuals' behaviors and status, such as
social connections and interactions, working status, mobility, and social
isolation and loneliness, which were found to be significantly associated with
depression by previous survey-based studies. This paper aims to explore the
NBDC data's value in predicting depressive symptom severity as measured via the
8-item Patient Health Questionnaire (PHQ-8). The data used in this paper
included 2,886 bi-weekly PHQ-8 records collected from 316 participants
recruited from three study sites in the Netherlands, Spain, and the UK as part
of the EU RADAR-CNS study. From the NBDC data two weeks prior to each PHQ-8
score, we extracted 49 Bluetooth features, including statistical features and
nonlinear features for measuring periodicity and regularity of individuals'
life rhythms. Linear mixed-effect models were used to explore associations
between Bluetooth features and the PHQ-8 score. We then applied hierarchical
Bayesian linear regression models to predict the PHQ-8 score from the extracted
Bluetooth features. A number of significant associations were found between
Bluetooth features and depressive symptom severity. Compared with commonly used
machine learning models, the proposed hierarchical Bayesian linear regression
model achieved the best prediction metrics, R2= 0.526, and root mean squared
error (RMSE) of 3.891. Bluetooth features can explain an extra 18.8% of the
variance in the PHQ-8 score relative to the baseline model without Bluetooth
features (R2=0.338, RMSE = 4.547).
|
The age of forest stands is critical information for many aspects of forest
management and conservation but area-wide information about forest stand age
often does not exist. In this study, we developed regression models for
large-scale area-wide prediction of age in Norwegian forests. For model
development we used more than 4800 plots of the Norwegian National Forest
Inventory (NFI) distributed over Norway between 58{\deg} and 65{\deg} northern
latitude in a 181,773 km2 study area. Predictor variables were based on
airborne laser scanning (ALS), Sentinel-2, and existing public map data. We
performed model validation on an independent data set consisting of 63 spruce
stands with known age. The best modelling strategy was to fit independent
linear regression models to each observed site index (SI) level and using a SI
prediction map in the application of the models. The most important predictor
variable was an upper percentile of the ALS heights, and
root-mean-squared-errors (RMSE) ranged between 3 and 31 years (6% to 26%) for
SI-specific models, and 21 years (25%) on average. Mean deviance (MD) ranged
between -1 and 3 years. The models improved with increasing SI and the RMSE
were largest for low SI stands older than 100 years. Using a mapped SI, which
is required for practical applications, RMSE and MD on plot-level ranged from
19 to 56 years (29% to 53%), and 5 to 37 years (5% to 31%), respectively. For
the validation stands, the RMSE and MD were 12 (22%) and 2 years (3%). Tree
height estimated from airborne laser scanning and predicted site index were the
most important variables in the models describing age. Overall, we obtained
good results, especially for stands with high SI, that could be considered for
practical applications but see considerable potential for improvements, if
better SI maps were available.
|
Randomization procedures are used in legal and statistical applications,
aiming to shield important decisions from spurious influences. This article
gives an intuitive introduction to randomization and examines some intended
consequences of its use related to truthful statistical inference and fair
legal judgment. This article also presents an open-code Java implementation for
a cryptographically secure, statistically reliable, transparent, traceable, and
fully auditable randomization tool.
|
Greater understanding of the pathways through which an environmental mixture
operates is important to design effective interventions. We present new
methodology to estimate the natural direct effect (NDE), natural indirect
effect (NIE), and controlled direct effects (CDEs) of a complex mixture
exposure on an outcome through a mediator variable. We implement Bayesian
Kernel Machine Regression (BKMR) to allow for all possible interactions and
nonlinear effects of 1) the co-exposures on the mediator, 2) the co-exposures
and mediator on the outcome, and 3) selected covariates on the mediator and/or
outcome. From the posterior predictive distributions of the mediator and
outcome, we simulate counterfactuals to obtain posterior samples, estimates,
and credible intervals of the mediation effects. Our simulation study
demonstrates that when the exposure-mediator and exposure-mediator-outcome
relationships are complex, BKMR-Causal Mediation Analysis performs better than
current mediation methods. We applied our methodology to quantify the
contribution of birth length as a mediator between in utero co-exposure to
arsenic, manganese and lead, and children's neurodevelopmental scores, in a
prospective birth cohort in Bangladesh. Among younger children, we found a
negative association between the metal mixture and neurodevelopment. We also
found evidence that birth length mediates the effect of exposure to the metal
mixture on neurodevelopment for younger children. If birth length were fixed to
its $75^{th}$ percentile value, the effect of the metal mixture on
neurodevelopment decreases, suggesting that nutritional interventions to help
increase birth length could potentially block the harmful effects of the metal
mixture on neurodevelopment.
|
This note is my comment on Glenn Shafer's discussion paper "Testing by
betting", together with two online appendices comparing p-values and betting
scores.
|
Dendritic spines, which are small protrusions on the dendrites of a neuron,
are of interest in neuroscience as they are related to cognitive processes such
as learning and memory. We analyse the distribution of spine locations on six
different dendrite trees from mouse neurons using point process theory for
linear networks. Besides some possible small-scale repulsion, { we find that
two of the spine point pattern data sets may be described by inhomogeneous
Poisson process models}, while the other point pattern data sets exhibit
clustering between spines at a larger scale. To model this we propose an
inhomogeneous Cox process model constructed by thinning a Poisson process on a
linear network with retention probabilities determined by a spatially
correlated random field. For model checking we consider network analogues of
the empirical $F$-, $G$-, and $J$-functions originally introduced for
inhomogeneous point processes on a Euclidean space. The fitted Cox process
models seem to catch the clustering of spine locations between spines, but also
posses a large variance in the number of points for some of the data sets
causing large confidence regions for the empirical $F$- and $G$-functions.
|
Building energy performance benchmarking has been adopted widely in the USA
and Canada through the Energy Star Portfolio Manager platform. Building
operations and energy management professionals have long used a simple 1-100
score to understand how their building compares to its peers. This single
number is easy to use, but is created by inaccurate linear regression (MLR)
models. This paper proposes a methodology that enhances the existing Energy
Star calculation method by increasing accuracy and providing additional model
output processing to help explain why a building is achieving a certain score.
We propose and test two new prediction models: multiple linear regression with
feature interactions (MLRi) and gradient boosted trees (GBT). Both models have
better average accuracy than the baseline Energy Star models. The third order
MLRi and GBT models achieve 4.9% and 24.9% increase in adjusted R2,
respectively, and 7.0% and 13.7% decrease in normalized root mean squared error
(NRMSE), respectively, on average than MLR models for six building types. Even
more importantly, a set of techniques is developed to help determine which
factors most influence the score using SHAP values. The SHAP force
visualization in particular offers an accessible overview of the aspects of the
building that influence the score that non-technical users can readily
interpret. This methodology is tested on the 2012 Commercial Building Energy
Consumption Survey (CBECS)(1,812 buildings) and public data sets from the
energy disclosure programs of New York City (11,131 buildings) and Seattle
(2,073 buildings).
|
Model compression is eminently suited for deploying deep learning on
IoT-devices. However, existing model compression techniques rely on access to
the original or some alternate dataset. In this paper, we address the model
compression problem when no real data is available, e.g., when data is private.
To this end, we propose Dream Distillation, a data-independent model
compression framework. Our experiments show that Dream Distillation can achieve
88.5% accuracy on the CIFAR-10 test set without actually training on the
original data!
|
Kink model is developed to analyze the data where the regression function is
twostage linear but intersects at an unknown threshold. In quantile regression
with longitudinal data, previous work assumed that the unknown threshold
parameters or kink points are heterogeneous across different quantiles.
However, the location where kink effect happens tend to be the same across
different quantiles, especially in a region of neighboring quantile levels.
Ignoring such homogeneity information may lead to efficiency loss for
estimation. In view of this, we propose a composite estimator for the common
kink point by absorbing information from multiple quantiles. In addition, we
also develop a sup-likelihood-ratio test to check the kink effect at a given
quantile level. A test-inversion confidence interval for the common kink point
is also developed based on the quantile rank score test. The simulation study
shows that the proposed composite kink estimator is more competitive with the
least square estimator and the single quantile estimator. We illustrate the
practical value of this work through the analysis of a body mass index and
blood pressure data set.
|
This paper evaluates the dynamic response of economic activity to shocks in
uncertainty as percieved by agents.The study focuses on the comparison between
the perception of economic uncertainty by manufacturers and consumers.Since
uncertainty is not directly observable, we approximate it using the geometric
discrepancy indicator of Claveria et al.(2019).This approach allows us
quantifying the proportion of disagreement in business and consumer
expectations of eleven European countries and the Euro Area.First, we compute
three independent indices of discrepancy corresponding to three dimensions of
uncertainty (economic, inflation and employment) and we average them to obtain
aggregate disagreement measures for businesses and for consumers.Next, we use a
bivariate Bayesian vector autoregressive framework to estimate the impulse
response functions to innovations in disagreement in every country.We find that
the effect on economic activity of shocks to the perception of uncertainty
differ markedly between manufacturers and consumers.On the one hand, shocks to
consumer discrepancy tend to be of greater magnitude and duration than those to
manufacturer discrepancy.On the other hand, innovations in disagreement between
the two collectives have an opposite effect on economic activity:shocks to
manufacturer discrepancy lead to a decrease in economic activity, as opposed to
shocks to consumer discrepancy.This finding is of particular relevance to
researchers when using cross-sectional dispersion of survey-based expectations,
since the effect on economic growth of shocks to disagreement depend on the
type of agent.
|
This work introduces a live anomaly detection system for high frequency and
high-dimensional data collected at regional scale such as Origin Destination
Matrices of mobile positioning data. To take into account different granularity
in time and space of the data coming from different sources, the system is
designed to be simple, yet robust to the data diversity, with the aim of
detecting abrupt increase of mobility towards specific regions as well as
sudden drops of movements. The methodology is designed to help policymakers or
practitioners, and makes it possible to visualise anomalies as well as estimate
the effect of COVID-19 related containment or lifting measures in terms of
their impact on human mobility as well as spot potential new outbreaks related
to large gatherings.
|
In this paper, we consider a class of nonlinear regression problems without
the assumption of being independent and identically distributed. We propose a
correspondent mini-max problem for nonlinear regression and give a numerical
algorithm. Such an algorithm can be applied in regression and machine learning
problems, and yield better results than traditional least square and machine
learning methods.
|
The Healthy Life Years Lost Methodology (HLYL) is introduced to model and
estimate the Health Expenditure in Japan in 2011. The HLYL theory and
estimation methods are presented in our books in the Springer Series on
Demographic Methods and Population Analysis vol. 45 and 46 titled: Exploring
the Health State of a Population by Dynamic Modeling Methods and Demography and
Health Issues: Population Aging, Mortality and Data Analysis. Special
applications appear in Chapters of these books as in The Health-Mortality
Approach in Estimating the Healthy Life Years Lost Compared to the Global
Burden of Disease Studies and Applications in World, USA and Japan and in
Estimation of the Healthy Life Expectancy in Italy Through a Simple Model Based
on Mortality Rate by Skiadas and Arezzo. Here further to present the main part
of the methodology with more details and illustrations, we develop and extend a
life table important to estimate the healthy life years lost along with the
fitting to the health expenditure in the related case. The application results
are quite promising and important to support decision makers and health
agencies with a powerful tool to improve the health expenditure allocation and
the future predictions.
|
In recent years, a number of methods have been proposed to estimate the times
at which neurons spike on the basis of calcium imaging data. However,
quantifying the uncertainty associated with these estimated spikes remains an
open problem. We consider a simple and well-studied model for calcium imaging
data, which states that calcium decays exponentially in the absence of a spike,
and instantaneously increases when a spike occurs. We wish to test the null
hypothesis that the neuron did not spike -- i.e., that there was no increase in
calcium -- at a particular timepoint at which a spike was estimated. In this
setting, classical hypothesis tests lead to inflated Type I error, because the
spike was estimated on the same data. To address this problem, we propose a
selective inference approach to test the null hypothesis. We describe an
efficient algorithm to compute finite-sample p-values that control selective
Type I error, and confidence intervals with correct selective coverage, for
spikes estimated using a recent proposal from the literature. We apply our
proposal in simulation and on calcium imaging data from the spikefinder
challenge.
|
In this paper, two novel algorithms to estimate a Gaussian Vector
Autoregressive (VAR) model from 1-bit measurements are introduced. They are
based on the Yule-Walker scheme modified to account for quantisation. The
scalar case has been studied before. The main difficulty when going from the
scalar to the vector case is how to estimate the ratios of the variances of
pairwise components of the VAR model. The first method overcomes this
difficulty by requiring the quantisation to be non-symmetric: each component of
the VAR model output is replaced by a binary "zero" or a binary "one" depending
on whether its value is greater than a strictly positive threshold. Different
components of the VAR model can have different thresholds. As the choice of
these thresholds has a strong influence on the performance, this first method
is best suited for applications where the variance of each time series is
approximately known prior to choosing the corresponding threshold. The second
method relies instead on symmetric quantisations of not only each component of
the VAR model but also on the pairwise differences of the components. These
additional measurements are equivalent to a ranking of the instantaneous VAR
model output, from the smallest component to the largest component. This avoids
the need for choosing thresholds but requires additional hardware for
quantising the components in pairs. Numerical simulations show the efficiency
of both schemes.
|
We develop a novel approximate Bayesian computation (ABC) framework, ABCDP,
that produces differentially private (DP) and approximate posterior samples.
Our framework takes advantage of the Sparse Vector Technique (SVT), widely
studied in the differential privacy literature. SVT incurs the privacy cost
only when a condition (whether a quantity of interest is above/below a
threshold) is met. If the condition is met sparsely during the repeated
queries, SVT can drastically reduces the cumulative privacy loss, unlike the
usual case where every query incurs the privacy loss. In ABC, the quantity of
interest is the distance between observed and simulated data, and only when the
distance is below a threshold, we take the corresponding prior sample as a
posterior sample. Hence, applying SVT to ABC is an organic way to transform an
ABC algorithm to a privacy-preserving variant with minimal modification, but
yields the posterior samples with a high privacy level. We theoretically
analyze the interplay between the noise added for privacy and the accuracy of
the posterior samples.
|
Air pollution constitutes the highest environmental risk factor in relation
to heath. In order to provide the evidence required for health impact analyses,
to inform policy and to develop potential mitigation strategies comprehensive
information is required on the state of air pollution. Information on air
pollution traditionally comes from ground monitoring (GM) networks but these
may not be able to provide sufficient coverage and may need to be supplemented
with information from other sources (e.g. chemical transport models; CTMs).
However, these may only be available on grids and may not capture micro-scale
features that may be important in assessing air quality in areas of high
population. We develop a model that allows calibration between multiple data
sources available at different levels of support by allowing the coefficients
of calibration equations to vary over space and time, enabling downscaling
where the data is sufficient to support it. The model is used to produce
high-resolution (1km $\times$ 1km) estimates of NO$_2$ and PM$_{2.5}$ across
Western Europe for 2010-2016. Concentrations of both pollutants are decreasing
during this period, however there remain large populations exposed to levels
exceeding the WHO Air Quality Guidelines and thus air pollution remains a
serious threat to health.
|
Here we present an Italian criminal case that shows how statistical methods
can be used to extract information from a series of mixed DNA profiles. The
case involves several different individuals and a set of different DNA traces.
The case possibly involves persons of interest of a small, inbred population of
Romani origin. First, a brief description of the case is provided. Secondly, we
introduce some heuristic tools that can be used to evaluate the data and
briefly outline the statistical model used for analysing DNA mixtures. Finally,
we illustrate some of the findings on the case and discuss further directions
of research. The results show how the use of different population database
allele frequencies for analysing the DNA mixtures can lead to very different
results, some seemingly inculpatory and some seemingly exculpatory. We also
illustrate the results obtained from combining the evidence from different
samples.
|
Plant reflectance spectra - the profile of light reflected by leaves across
different wavelengths - supply the spectral signature for a species at a
spatial location to enable estimation of functional and taxonomic diversity for
plants. We consider leaf spectra as "responses" to be explained spatially.
These spectra/reflectances are functions over a wavelength band that respond to
the environment.
Our motivating data are gathered for several families from the Cape Floristic
Region (CFR) in South Africa and lead us to develop rich novel spatial models
that can explain spectra for genera within families. Wavelength responses for
an individual leaf are viewed as a function of wavelength, leading to
functional data modeling. Local environmental features become covariates. We
introduce wavelength - covariate interaction since the response to
environmental regressors may vary with wavelength, so may variance. Formal
spatial modeling enables prediction of reflectances for genera at unobserved
locations with known environmental features. We incorporate spatial dependence,
wavelength dependence, and space-wavelength interaction (in the spirit of
space-time interaction). We implement out-of-sample validation to select a best
model, discovering that the model features listed above are all informative for
the functional data analysis. We then supply interpretation of the results
under the selected model.
|
To restore the historical sea surface temperatures (SSTs) better, it is
important to construct a good calibration model for the associated proxies. In
this paper, we introduce a new model for alkenone (${\rm{U}}_{37}^{\rm{K}'}$)
based on the heteroscedastic Gaussian process (GP) regression method. Our
nonparametric approach not only deals with the variable pattern of noises over
SSTs but also contains a Bayesian method of classifying potential outliers.
|
We expand Mendelian Randomization (MR) methodology to deal with randomly
missing data on either the exposure or the outcome variable, and furthermore
with data from nonindependent individuals (eg components of a family). Our
method rests on the Bayesian MR framework proposed by Berzuini et al (2018),
which we apply in a study of multiplex Multiple Sclerosis (MS) Sardinian
families to characterise the role of certain plasma proteins in MS causation.
The method is robust to presence of pleiotropic effects in an unknown number of
instruments, and is able to incorporate inter-individual kinship information.
Introduction of missing data allows us to overcome the bias introduced by the
(reverse) effect of treatment (in MS cases) on level of protein. From a
substantive point of view, our study results confirm recent suspicion that an
increase in circulating IL12A and STAT4 protein levels does not cause an
increase in MS risk, as originally believed, suggesting that these two proteins
may not be suitable drug targets for MS.
|
This tutorial demonstrates the estimation and interpretation of the
Multilevel Social Relations Model for dyadic data. The Social Relations Model
is appropriate for data structures in which individuals appear multiple times
as both the source and recipient of dyadic outcomes. Estimated using Stat-JR
statistical software, the models are fitted to multiple outcome types:
continuous, count, and binary outcomes. In addition, models are demonstrated
for dyadic data from a single group and from multiple groups. The modeling
approaches are illustrated via a series of case studies, and the data and
software to replicate these analyses are available as supplemental files.
|
This paper develops tools to characterize how species are affected by
environmental variability, based on a functional single index model relating a
response such as growth rate or survival to environmental conditions. In
ecology, the curvature of such responses are used, via Jensen's inequality, to
determine whether environmental variability is harmful or beneficial, and
differing nonlinear responses to environmental variability can contribute to
the coexistence of competing species.
Here, we address estimation and inference for these models with observational
data on individual responses to environmental conditions. Because nonparametric
estimation of the curvature (second derivative) in a nonparametric functional
single index model requires unrealistic sample sizes, we instead focus on
directly estimating the effect of the nonlinearity, by comparing the average
response to a variable environment with the response at the expected
environment, which we call the Jensen Effect. We develop a test statistic to
assess whether this effect is significantly different from zero. In doing so we
re-interpret the SiZer method of Chaudhuri and Marron (1995) by maximizing a
test statistic over smoothing parameters. We show that our proposed method
works well both in simulations and on real ecological data from the long-term
data set described in Drake (2005).
|
This brief note documents the data generating processes used in the 2017 Data
Analysis Challenge associated with the Atlantic Causal Inference Conference
(ACIC). The focus of the challenge was estimation and inference for conditional
average treatment effects (CATEs) in the presence of targeted selection, which
leads to strong confounding. The associated data files and further plots can be
found on the first author's web page.
|
Traditional training of deep classifiers yields overconfident models that are
not reliable under dataset shift. We propose a Bayesian framework to obtain
reliable uncertainty estimates for deep classifiers. Our approach consists of a
plug-in "generator" used to augment the data with an additional class of points
that lie on the boundary of the training data, followed by Bayesian inference
on top of features that are trained to distinguish these "out-of-distribution"
points.
|
In this paper, we investigate the reasons that the Bayesian estimator of the
tail probability is always higher than the frequentist estimator. Sufficient
conditions for this phenomenon are established both by using Jensen's
Inequality and by looking at Taylor series approximations, both of which point
to the convexity of the distribution function.
|
Mutual information is a well-known tool to measure the mutual dependence
between variables. In this paper, a Bayesian nonparametric estimation of mutual
information is established by means of the Dirichlet process and the
$k$-nearest neighbor distance. As a direct outcome of the estimation, an
easy-to-implement test of independence is introduced through the relative
belief ratio. Several theoretical properties of the approach are presented. The
procedure is investigated through various examples where the results are
compared to its frequentist counterpart and demonstrate a good performance.
|
Testing individuals for the presence of severe acute respiratory syndrome
coronavirus 2 (SARS-CoV-2), the pathogen causing the coronavirus disease 2019
(COVID-19), is crucial for curtailing transmission chains. Moreover, rapidly
testing many potentially infected individuals is often a limiting factor in
controlling COVID-19 outbreaks. Hence, pooling strategies, wherein individuals
are grouped and tested simultaneously, are employed. We present a novel pooling
strategy that implements D-Optimal Pooling Experimental design (DOPE). DOPE
defines optimal pooled tests as those maximizing the mutual information between
data and infection states. We estimate said mutual information via Monte-Carlo
sampling and employ a discrete optimization heuristic for maximizing it. DOPE
outperforms common pooling strategies both in terms of lower error rates and
fewer tests utilized. DOPE holds several additional advantages: it provides
posterior distributions of the probability of infection, rather than only
binary classification outcomes; it naturally incorporates prior information of
infection probabilities and test error rates; and finally, it can be easily
extended to include other, newly discovered information regarding COVID-19.
Hence, we believe that implementation of Bayesian D-optimal experimental design
holds a great promise for the efforts of combating COVID-19 and other future
pandemics.
|
In population-based cancer survival analysis, the net survival is important
for government to assess health care programs. For decades, it is observed that
the net survival reaches a plateau after long-term follow-up, this is so called
``statistical cure''. Several methods were proposed to address the statistical
cure. Besides, the cure time can be used to evaluate the time period of a
health care program for a specific patient population, and it also can be
helpful for a clinician to explain the prognosis for patients, therefore the
cure time is an important health care index. However, those proposed methods
assume the cure time to be infinity, thus it is inconvenient to make inference
on the cure time. In this dissertation, we define a more general concept of
statistical cure via conditional survival. Based on the newly defined
statistical cure, the cure time is well defined. We develop cure time model
methodologies and show a variety of properties through simulation. In data
analysis, cure times are estimated for 22 major cancers in Taiwan, we further
use colorectal cancer data as an example to conduct statistical inference via
cure time model with covariate sex, age group, and stage. This dissertation
provides a methodology to obtain cure time estimate, which can contribute to
public health policy making.
|
From two coupled Multiclass Classification (MCC) and Response Manifold
Analytics (RMA) perspectives, we develop Categorical Exploratory Data Analysis
(CEDA) on PITCHf/x database for the information content of Major League
Baseball's (MLB) pitching dynamics. MCC and RMA information contents are
represented by one collection of multi-scales pattern categories from mixing
geometries and one collection of global-to-local geometric localities from
response-covariate manifolds, respectively. These collectives shed light on the
pitching dynamics and maps out uncertainty of popular machine learning
approaches. On MCC setting, an indirect-distance-measure based label embedding
tree leads to discover asymmetry of mixing geometries among labels'
point-clouds. A selected chain of complementary covariate feature groups
collectively brings out multi-order mixing geometric pattern categories. Such
categories then reveal the true nature of MCC predictive inferences. On RMA
setting, multiple response features couple with multiple major covariate
features to demonstrate physical principles bearing manifolds with a lattice of
natural localities. With minor features' heterogeneous effects being locally
identified, such localities jointly weave their focal characteristics into
system understanding and provide a platform for RMA predictive inferences. Our
CEDA works for universal data types, adopts non-linear associations and
facilitates efficient feature-selections and inferences.
|
We consider compressed sensing formulated as a minimization problem of
nonconvex sparse penalties, Smoothly Clipped Absolute deviation (SCAD) and
Minimax Concave Penalty (MCP). The nonconvexity of these penalties is
controlled by nonconvexity parameters, and L1 penalty is contained as a limit
with respect to these parameters. The analytically derived reconstruction limit
overcomes that of L1 and the algorithmic limit in the Bayes-optimal setting,
when the nonconvexity parameters have suitable values. However, for small
nonconvexity parameters, where the reconstruction of the relatively dense
signals is theoretically guaranteed, the corresponding approximate message
passing (AMP) cannot achieve perfect reconstruction. We identify that the
shrinks in the basin of attraction to the perfect reconstruction causes the
discrepancy between the AMP and corresponding theory using state evolution. A
part of the discrepancy is resolved by introducing the control of the
nonconvexity parameters to guide the AMP trajectory to the basin of the
attraction.
|
It has been conjectured that the Fisher divergence is more robust to model
uncertainty than the conventional Kullback-Leibler (KL) divergence. This
motivates the design of a new class of robust generative auto-encoders (AE)
referred to as Fisher auto-encoders. Our approach is to design Fisher AEs by
minimizing the Fisher divergence between the intractable joint distribution of
observed data and latent variables, with that of the postulated/modeled joint
distribution. In contrast to KL-based variational AEs (VAEs), the Fisher AE can
exactly quantify the distance between the true and the model-based posterior
distributions. Qualitative and quantitative results are provided on both MNIST
and celebA datasets demonstrating the competitive performance of Fisher AEs in
terms of robustness compared to other AEs such as VAEs and Wasserstein AEs.
|
This work briefly explores the possibility of approximating spatial distance
(alternatively, similarity) between data points using the Isolation Forest
method envisioned for outlier detection. The logic is similar to that of
isolation: the more similar or closer two points are, the more random splits it
will take to separate them. The separation depth between two points can be
standardized in the same way as the isolation depth, transforming it into a
distance metric that is limited in range, centered, and in compliance with the
axioms of distance. This metric presents some desirable properties such as
being invariant to the scales of variables or being able to account for
non-linear relationships between variables, which other metrics such as
Euclidean or Mahalanobis distance do not. Extensions to the Isolation Forest
method are also proposed for handling categorical variables and missing values,
resulting in a more generalizable and robust metric.
|
Childhood obesity is a major public health challenge. Obesity in early
childhood and adolescence can lead to obesity and other health problems in
adulthood. Early prediction and identification of the children at a high risk
of developing childhood obesity may help in engaging earlier and more effective
interventions to prevent and manage this and other related health conditions.
Existing predictive tools designed for childhood obesity primarily rely on
traditional regression-type methods without exploiting longitudinal patterns of
children's data (ignoring data temporality). In this paper, we present a
machine learning model specifically designed for predicting future obesity
patterns from generally available items on children's medical history. To do
this, we have used a large unaugmented EHR (Electronic Health Record) dataset
from a major pediatric health system in the US. We adopt a general LSTM (long
short-term memory) network architecture for our model for training over dynamic
(sequential) and static (demographic) EHR data. We have additionally included a
set embedding and attention layers to compute the feature ranking of each
timestamp and attention scores of each hidden layer corresponding to each input
timestamp. These feature ranking and attention scores added interpretability at
both the features and the timestamp-level.
|
We propose a hierarchical Bayesian recurrent state space model for modeling
switching network connectivity in resting state fMRI data. Our model allows us
to uncover shared network patterns across disease conditions. We evaluate our
method on the ADNI2 dataset by inferring latent state patterns corresponding to
altered neural circuits in individuals with Mild Cognitive Impairment (MCI). In
addition to states shared across healthy and individuals with MCI, we discover
latent states that are predominantly observed in individuals with MCI. Our
model outperforms current state of the art deep learning method on ADNI2
dataset.
|
One of the classic concerns in statistics is determining if two samples come
from thesame population, i.e. homogeneity testing. In this paper, we propose a
homogeneitytest in the context of Functional Data Analysis, adopting an idea
from multivariatedata analysis: the data depth plot (DD-plot). This DD-plot is
a generalization of theunivariate Q-Q plot (quantile-quantile plot). We propose
some statistics based onthese DD-plots, and we use bootstrapping techniques to
estimate their distributions.We estimate the finite-sample size and power of
our test via simulation, obtainingbetter results than other homogeneity test
proposed in the literature. Finally, weillustrate the procedure in samples of
real heterogeneous data and get consistent results.
|
In this paper, the authors evaluate the performance of a spatial
multiresolution analysis (SMA) method that behaves like a variable bandwidth
kernel density estimation (KDE) method, for hazardous road segments
identification (HRSI) and crash risk (expected number of crashes) estimation.
The proposed SMA, is similar to the KDE method with the additional benefit of
allowing for the bandwidth to be different at different road segments depending
on how homogenous the segments are. Furthermore, the optimal bandwidth at each
road segment is determined solely based on the data by minimizing an unbiased
estimate of the mean square error. The authors compare the SMA method with the
state of the practice crash analysis method, the empirical Bayes (EB) method,
in terms of their HRSI ability and their ability to predict future crashes. The
results indicate that the SMA may outperform the EB method, at least with the
crash data of the entire Virginia interstate network used in this paper. The
SMA is implemented in an Excel spreadsheet that is freely available for
download.
|
We develop a model based on a generalised Poisson-Dirichlet distribution for
the analysis of genetic diversity, and illustrate its use on microsatellite
data for the genus Dasyurus (the quoll, a marsupial carnivore listed as
near-threatened in Australia). Our class of distributions, termed
$PD_\alpha^{(r)}$, is constructed from a negative binomial point process,
generalizing the usual one-parameter $PD_\alpha$ model, which is constructed
from a Poisson point process. Both models have at their heart a
Stable$(\alpha)$ process, but in $PD_\alpha^{(r)}$, an extra parameter $r>0$
adds flexibility, analogous to the way the negative binomial distribution
allows for "overdispersion" in the analysis of count data. A key result
obtained is a generalised version of Ewens' sampling formula for
$PD_\alpha^{(r)}$. We outline the theoretical basis for the model, and, for the
quolls data, estimate the parameters $\alpha$ and r by least squares, showing
how the extra parameter r aids in the interpretability of the data by
comparison with the standard $PD_\alpha$ model. The methods potentially have
implications for the management and conservation of threatened populations.
|
Pooled testing is widely used for screening for viral or bacterial infections
with low prevalence when individual testing is not cost-efficient. Pooled
testing with qualitative assays that give binary results has been well-studied.
However, characteristics of pooling with quantitative assays were mostly
demonstrated using simulations or empirical studies. We investigate properties
of three pooling strategies with quantitative assays: traditional two-stage
mini-pooling (MP) (Dorfman, 1943), mini-pooling with deconvolution algorithm
(MPA) (May et al., 2010), and marker-assisted MPA (mMPA) (Liu et al., 2017).
MPA and mMPA test individuals in a sequence after a positive pool and implement
a deconvolution algorithm to determine when testing can cease to ascertain all
individual statuses. mMPA uses information from other available markers to
determine an optimal order for individual testings. We derive and compare the
general statistical properties of the three pooling methods. We show that with
a proper pool size, MP, MPA, and mMPA can be more cost-efficient than
individual testing, and mMPA is superior to MPA and MP. For diagnostic
accuracy, mMPA and MPA have higher specificity and positive predictive value
but lower sensitivity and negative predictive value than MP and individual
testing. Included in this paper are applications to various simulations and an
application for HIV treatment monitoring.
|
A challenging aspect of the bandit problem is that a stochastic reward is
observed only for the chosen arm and the rewards of other arms remain missing.
Since the arm choice depends on the past context and reward pairs, the contexts
of chosen arms suffer from correlation and render the analysis difficult. We
propose a novel multi-armed contextual bandit algorithm called Doubly Robust
(DR) Thompson Sampling (TS) that applies the DR technique used in missing data
literature to TS. The proposed algorithm improves the bound of TS by a factor
of $\sqrt{d}$, where $d$ is the dimension of the context. A benefit of the
proposed method is that it uses all the context data, chosen or not chosen,
thus allowing to circumvent the technical definition of unsaturated arms used
in theoretical analysis of TS. Empirical studies show the advantage of the
proposed algorithm over TS.
|
Multiclass extensions of the support vector machine (SVM) have been
formulated in a variety of ways. A recent empirical comparison of nine such
formulations [Do\v{g}an et al. 2016] recommends the variant proposed by Weston
and Watkins (WW), despite the fact that the WW-hinge loss is not calibrated
with respect to the 0-1 loss. In this work we introduce a novel discrete loss
function for multiclass classification, the ordered partition loss, and prove
that the WW-hinge loss is calibrated with respect to this loss. We also argue
that the ordered partition loss is maximally informative among discrete losses
satisfying this property. Finally, we apply our theory to justify the empirical
observation made by Do\v{g}an et al. that the WW-SVM can work well even under
massive label noise, a challenging setting for multiclass SVMs.
|
The Exponentially Weighted Moving Average (EWMA) and Cumulative Sum (CUSUM)
control charts have been used in profile monitoring to track drift shifts that
occur in a monitored process. We construct Bayesian EWMA and Bayesian CUSUM
charts informed by posterior and posterior predictive distributions using
different loss functions, prior distributions, and likelihood distributions. A
simulation study is performed, and the performance of the charts are evaluated
via average run length (ARL), standard deviation of the run length (SDRL),
average time to signal (ATS), and standard deviation of time to signal (SDTS).
A sensitivity analysis is conducted using choices for the smoothing parameter,
out-of-control shift size, and hyper-parameters of the distribution. Based on
obtained results, we provide recommendations for use of the Bayesian EWMA and
Bayesian CUSUM control charts.
|
Batch Bayesian optimisation (BO) has been successfully applied to
hyperparameter tuning using parallel computing, but it is wasteful of
resources: workers that complete jobs ahead of others are left idle. We address
this problem by developing an approach, Penalising Locally for Asynchronous
Bayesian Optimisation on $k$ workers (PLAyBOOK), for asynchronous parallel BO.
We demonstrate empirically the efficacy of PLAyBOOK and its variants on
synthetic tasks and a real-world problem. We undertake a comparison between
synchronous and asynchronous BO, and show that asynchronous BO often
outperforms synchronous batch BO in both wall-clock time and number of function
evaluations.
|
Mineral exploration in biogeochemistry is related to the detection of
anomalies in soil, which is driven by many factors and thus a complex problem.
Mik\v{s}ov\'a, Rieser, and Filzmoser (2019) have introduced a method for the
identification of spatial patterns with increased element concentrations in
samples along a linear sampling transect. This procedure is based on fitting
Generalized Additive Models (GAMs) to the concentration data, and computing a
curvature measure from the pairwise log-ratios of these fits. The higher the
curvature, the more likely one or both elements of the pair indicate local
mineralization. This method is applied on two geochemical data sets which have
been collected specifically for the purpose of mineral exploration. The aim is
to test the technique for its ability to identify pathfinder elements to detect
mineralized zones, and to verify whether the method can indicate which sampling
material is best suited for this purpose.
Reference: Mik\v{s}ov\'a D., Rieser C., Filzmoser P. (2019). "Identification
of mineralization in geochemistry along a transect based on the spatial
curvature of log-ratios." arXiv, (1912.02867).
|
In many contexts Gaussian Mixtures (GM) are used to approximate probability
distributions, possibly time-varying. In some applications the number of GM
components exponentially increases over time, and reduction procedures are
required to keep them reasonably limited. The GM reduction (GMR) problem can be
formulated by choosing different measures of the dissimilarity of GMs before
and after reduction, like the Kullback-Leibler Divergence (KLD) and the
Integral Squared Error (ISE). Since in no case the solution is obtained in
closed form, many approximate GMR algorithms have been proposed in the past
three decades, although none of them provides optimality guarantees. In this
work we discuss the importance of the choice of the dissimilarity measure and
the issue of consistency of all steps of a reduction algorithm with the chosen
measure. Indeed, most of the existing GMR algorithms are composed by several
steps which are not consistent with a unique measure, and for this reason may
produce reduced GMs far from optimality. In particular, the use of the KLD, of
the ISE and normalized ISE is discussed and compared in this perspective.
|
Constructing confidence intervals for the coefficients of high-dimensional
sparse linear models remains a challenge, mainly because of the complicated
limiting distributions of the widely used estimators, such as the lasso.
Several methods have been developed for constructing such intervals. Bootstrap
lasso+ols is notable for its technical simplicity, good interpretability, and
performance that is comparable with that of other more complicated methods.
However, bootstrap lasso+ols depends on the beta-min assumption, a theoretic
criterion that is often violated in practice. Thus, we introduce a new method,
called bootstrap lasso+partial ridge, to relax this assumption. Lasso+partial
ridge is a two-stage estimator. First, the lasso is used to select features.
Then, the partial ridge is used to refit the coefficients. Simulation results
show that bootstrap lasso+partial ridge outperforms bootstrap lasso+ols when
there exist small, but nonzero coefficients, a common situation that violates
the beta-min assumption. For such coefficients, the confidence intervals
constructed using bootstrap lasso+partial ridge have, on average, $50\%$ larger
coverage probabilities than those of bootstrap lasso+ols. Bootstrap
lasso+partial ridge also has, on average, $35\%$ shorter confidence interval
lengths than those of the de-sparsified lasso methods, regardless of whether
the linear models are misspecified. Additionally, we provide theoretical
guarantees for bootstrap lasso+partial ridge under appropriate conditions, and
implement it in the R package "HDCI."
|
Nested sampling (NS) is an invaluable tool in data analysis in modern
astrophysics, cosmology, gravitational wave astronomy and particle physics. We
identify a previously unused property of NS related to order statistics: the
insertion indexes of new live points into the existing live points should be
uniformly distributed. This observation enabled us to create a novel
cross-check of single NS runs. The tests can detect when an NS run failed to
sample new live points from the constrained prior and plateaus in the
likelihood function, which break an assumption of NS and thus leads to
unreliable results. We applied our cross-check to NS runs on toy functions with
known analytic results in 2 - 50 dimensions, showing that our approach can
detect problematic runs on a variety of likelihoods, settings and dimensions.
As an example of a realistic application, we cross-checked NS runs performed in
the context of cosmological model selection. Since the cross-check is simple,
we recommend that it become a mandatory test for every applicable NS run.
|
Multidrug-resistant Enterobacteriaceae (MDR-E) have become a major public
health threat in many European countries. While traditional infection control
strategies primarily target the containment of intra-hospital transmission,
there is growing evidence highlighting the importance of inter-hospital patient
traffic for the spread of MDR-E within healthcare systems.
Our aim is to propose a network model, which will reflect patient traffic in
various European healthcare systems and will thus provide the framework to
study systematically transmission dynamics of MDR-E and the effectiveness of
infection control strategies to contain their spread within and potentially
across healthcare systems. However, to do that first we need to analyse real
patients data and base on that propose network model reflecting the complexity
of the real hospital network connections and dynamics of patient transfers
between healthcare facilities.
|
Given a family of null hypotheses $H_{1},\ldots,H_{s}$, we are interested in
the hypothesis $H_{s}^{\gamma}$ that at most $\gamma-1$ of these null
hypotheses are false. Assuming that the corresponding $p$-values are
independent, we are investigating combined $p$-values that are valid for
testing $H_{s}^{\gamma}$. In various settings in which $H_{s}^{\gamma}$ is
false, we determine which combined $p$-value works well in which setting. Via
simulations, we find that the Stouffer method works well if the null $p$-values
are uniformly distributed and the signal strength is low, and the Fisher method
works better if the null $p$-values are conservative, i.e. stochastically
larger than the uniform distribution. The minimum method works well if the
evidence for the rejection of $H_{s}^{\gamma}$ is focused on only a few
non-null $p$-values, especially if the null $p$-values are conservative.
Methods that incorporate the combination of $e$-values work well if the null
hypotheses $H_{1},\ldots,H_{s}$ are simple.
|
The study of cultural evolution has taken on an increasingly
interdisciplinary and diverse approach in explicating phenomena of cultural
transmission and adoptions. Inspired by this computational movement, this study
uses Bayesian networks analysis, combining both the frequentist and the
Hamiltonian Markov chain Monte Carlo (MCMC) approach, to investigate the highly
representative elements in the cultural evolution of a Vietnamese city's
architecture in the early 20th century. With a focus on the fa\c{c}ade design
of 68 old houses in Hanoi's Old Quarter (based on 78 data lines extracted from
248 photos), the study argues that it is plausible to look at the aesthetics,
architecture and designs of the house fa\c{c}ade to find traces of cultural
evolution in Vietnam, which went through more than six decades of French
colonization and centuries of sociocultural influence from China. The in-depth
technical analysis, though refuting the presumed model on the probabilistic
dependency among the variables, yields several results, the most notable of
which is the strong influence of Buddhism over the decorations of the house
fa\c{c}ade. Particularly, in the top 5 networks with the best Bayesian
Information criterion (BIC) scores and p<0.05, the variable for decorations
(DC) always has a direct probabilistic dependency on the variable B for
Buddhism. The paper then checks the robustness of these models using
Hamiltonian MCMC method and find the posterior distributions of the models'
coefficients all satisfy the technical requirement. Finally, this study
suggests integrating Bayesian statistics in social sciences in general and for
study of cultural evolution and architectural transformation in particular.
|
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.